ROTEL RMB-1075 Five-Channel THX Power Amp In Black & Silver. True 120w x 5! Amazing AV upgrade. I used in a 7.2.1 system and kept the AV amp for the lighter duty speakers - the improvement was incredible! Only selling as am moving to actives in my AV system. In fantastic condition, if there are any little marks they’ll hopefully be in the pics but it’s been on a rack it’s whole life. I can’t find the box at the moment so will have to be collection only at the moment. Specifications: Continuous Power Output 120 watts/channel into 8 ohms Signal to Noise Ratio 116 dB Power 230 Volts, 50 Hz (European version)

For sale is the Rotel RMB-1565 200 watt x 5 channel Amplifier. Housed in a BDI rack, in non-smoking and non pet environment. The Rotel was used for height channels for Dolby Atmos. Never driven hard, but can deal out the power! Good luck! Description The RMB-1565 is designed around the same superb Class D design as the RMB-1575 but with a slightly smaller output of 5 x 100 watts per channel into 8 ohms. It is the perfect choice for medium to large home theater rooms. Plus, just like its bigger brother, it will double its output with more difficult lower impedance loads, thereby providing 5 x 200 watts into 4 ohms. It also includes all of the custom installation features such as 12 volt triggers, and “U height” dimensions that are demanded of today’s modern power amplifiers. *Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation. Specifications Power Output all channels driven IM Distortion Damping Factor (8 ohms) Gain Input Sens. / Impedance 100 watts x 5ch (20-20 kHz, 0.03% THD, 8 ohms) 200 watts x 5ch (20-20 kHz, 0.03% THD, 4 ohms) Frequency Response S/N Ratio (IHF A) Power Consumption Dimensions (W x H x D) Weight 10 - 40 kHz (+/-3dB) 105 dB 250 watts 431 x 99 x 339 mm (17 x 3 7/8 x 13 3/8 in)

For sale is the Rotel RMB-1565 200 watt x 5 channel Amplifier. Housed in a BDI rack, in non-smoking and non pet environment. The Rotel was used for height channels for Dolby Atmos. Never driven hard, but can deal out the power! Good luck! Description The RMB-1565 is designed around the same superb Class D design as the RMB-1575 but with a slightly smaller output of 5 x 100 watts per channel into 8 ohms. It is the perfect choice for medium to large home theater rooms. Plus, just like its bigger brother, it will double its output with more difficult lower impedance loads, thereby providing 5 x 200 watts into 4 ohms. It also includes all of the custom installation features such as 12 volt triggers, and “U height” dimensions that are demanded of today’s modern power amplifiers. *Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation. Specifications Power Output all channels driven IM Distortion Damping Factor (8 ohms) Gain Input Sens. / Impedance 100 watts x 5ch (20-20 kHz, 0.03% THD, 8 ohms) 200 watts x 5ch (20-20 kHz, 0.03% THD, 4 ohms) Frequency Response S/N Ratio (IHF A) Power Consumption Dimensions (W x H x D) Weight 10 - 40 kHz (+/-3dB) 105 dB 250 watts 431 x 99 x 339 mm (17 x 3 7/8 x 13 3/8 in)

For sale is the Rotel RMB-1565 200 watt x 5 channel Amplifier. Housed in a BDI rack, in non-smoking and non pet environment. The Rotel was used for height channels for Dolby Atmos. Never driven hard, but can deal out the power! Good luck! Description The RMB-1565 is designed around the same superb Class D design as the RMB-1575 but with a slightly smaller output of 5 x 100 watts per channel into 8 ohms. It is the perfect choice for medium to large home theater rooms. Plus, just like its bigger brother, it will double its output with more difficult lower impedance loads, thereby providing 5 x 200 watts into 4 ohms. It also includes all of the custom installation features such as 12 volt triggers, and “U height” dimensions that are demanded of today’s modern power amplifiers. *Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation. Specifications Power Output all channels driven IM Distortion Damping Factor (8 ohms) Gain Input Sens. / Impedance 100 watts x 5ch (20-20 kHz, 0.03% THD, 8 ohms) 200 watts x 5ch (20-20 kHz, 0.03% THD, 4 ohms) Frequency Response S/N Ratio (IHF A) Power Consumption Dimensions (W x H x D) Weight 10 - 40 kHz (+/-3dB) 105 dB 250 watts 431 x 99 x 339 mm (17 x 3 7/8 x 13 3/8 in)

Rotel Rmb 1555 5x120 watt Class AB power Amplifier. The RMB-1555 retains a very robust power supply to deliver 5 x 120 Watts per channel to medium and large home theaters.Downloaded manual included. Great sound! Hard to find powerful amp in good condition.

For sale is the Rotel RMB-1565 200 watt x 5 channel Amplifier. Housed in a BDI rack, in non-smoking and non pet environment. The Rotel was used for height channels for Dolby Atmos. Never driven hard, but can deal out the power! Good luck! Description The RMB-1565 is designed around the same superb Class D design as the RMB-1575 but with a slightly smaller output of 5 x 100 watts per channel into 8 ohms. It is the perfect choice for medium to large home theater rooms. Plus, just like its bigger brother, it will double its output with more difficult lower impedance loads, thereby providing 5 x 200 watts into 4 ohms. It also includes all of the custom installation features such as 12 volt triggers, and “U height” dimensions that are demanded of today’s modern power amplifiers. *Note – all Rotel 15 series components may be rack mounted and remotely controlled via RS-232, IR, or 12 volt (depending on model) for complete stealth operation. Specifications Power Output all channels driven IM Distortion Damping Factor (8 ohms) Gain Input Sens. / Impedance 100 watts x 5ch (20-20 kHz, 0.03% THD, 8 ohms) 200 watts x 5ch (20-20 kHz, 0.03% THD, 4 ohms) Frequency Response S/N Ratio (IHF A) Power Consumption Dimensions (W x H x D) Weight 10 - 40 kHz (+/-3dB) 105 dB 250 watts 431 x 99 x 339 mm (17 x 3 7/8 x 13 3/8 in)

2 out of the 6 amplifier banks are blown, and it is filthy. However if you have need of a few good modules to fix another or have extra modules to fix this one, and you don’t mind cleaning it up or doing the work have at it. I don’t feel like dealing with it myself.

Rotel Rmb 1555 5x120 watt Class AB power Amplifier. The RMB-1555 retains a very robust power supply to deliver 5 x 120 Watts per channel to medium and large home theaters. Great sound! Hard to find amp in good condition.

Used in excellent condition keep in non smoke enviroment and just a few hours! About the Rotel RMB-1512by CrutchfieldsEric A.A flexible power amp for a multi-zone sound systemRotels RMB-1512 delivers a considerable 100 watts into each of its 12 channels, rated with all channels driven. Flexible setup options let you distribute that power to up to six independent zones in a custom-installed multi-room sound system.KEEP READINGProduct highlights:100 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with all channels driven200 watts per channel into 4 ohmsinput linking, input mono switch and signal output link for system configuration flexibilityClass D design with thermal and overcurrent protection circuitryfrequency response: 10-40,000 Hz (±1dB)signal-to-noise ratio: 109 dBdetachable power cordrack mounting ears includedConnections:stereo RCA link input and output for daisy-chaining multiple amplifiers or other componentssix zone buses, each including:one unbalanced stereo RCA input pairfour-pin Euroblock connectorinput source switch (mono summing in zones 1 and 2 only)left and right 5-way binding post terminals3.5mm 12-volt trigger in/out with signal sensing switchDimensions and warranty:17W x 5-11/16H x 17-13/16D (3U rack spaces)weight: 24 lbs.warranty: 5 yearsMFR # ROT1030007

All time classic and beautiful THX certified Rotel home cinema amplifier. Fully working and in very good condition. RMB-1075 THX Five Channel Power Amplifier. 5 x 120W. Collection only please due to the weight of this amplifier. Manufacturers specification: This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which israted for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generousheadroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well asthe most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suitedfor either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” inputand output jacks make this amplifier well suited for fully integrated systems with total remote control capability.Power Configurations: 5 x 120 wattsWatts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD120 wattsTHD (20-20,000Hz) cont. rated power one-half rated power one watt per channel0.03%, maximum0.03%, maximum0.05%, maximumIM Distortion (at rated ower, 60Hz:7kHz = 4:1) 0.03%, maximumDamping Factor (8 ohms) 180Input Sens. / Impedance 1.0V / 27 kohmsFrequency Response 15-100kHz (=0.5, -3dB)S/N Ratio (IHF A) 115dBPower Consumption 800 wattsDimensions (W x H x D) 433 x 189 x 380 mm17 1/8 x 7 1/2 x 15Front Panel Height 176 mm, 6.9Weight (net) 17 kg / 37.4 lb

Rotel RMB-1512 12 Channel Home Theater Distribution Amplifier.

This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 watts Watts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD 120 watts THD (20-20,000Hz) cont. rated power one-half rated power one watt per channel 0.03%, maximum 0.03%, maximum 0.05%, maximum IM Distortion (at rated over, 60Hz:7kHz = 4:1) 0.03%, maximum Damping Factor (8 ohms) 180 Input Sens. / Impedance 1.0V / 27 k ohms Frequency Response 15-100kHz (=0.5, -3dB) S/N Ratio (IHF A) 115dB Power Consumption 800 watts Dimensions (W x H x D) 433 x 189 x 380 mm 17 1/8 x 7 1/2 x 15 Front Panel Height 176 mm, 6.9 Weight (net) 17 kg / 37.4 lbs .It will be Professionally & Safley packaged in a (non-factory) shipping box, arriving as photographed to your listed E-Bay address, Insurance & a Signature Will Be Required for delivery. Contact Me with any inquiries or questions. Thanks for looking!......Please check out some of my other listings, I have2 of these Amps In case you need 10 channels and some other Minty Rotel equipment & other High-End Audio Gear at very competitive prices....

This multi-channel power amplifier delivers 120 watts (all channels driven), thanks to a power supply composed of a generous 1,500 VA toroidal transformer and eight 10,000 ?f British-made Slit Foil capacitors. 20 output devices, each of which is rated for 130 watts and 15 amperes of current capability, make full use of the supply’s potential. The RMB-1075’s generous headroom and state of the art signal-to-noise measurements ensure unsullied reproduction of the most dynamic as well as the most delicate sonic nuances. Complete with gold plated RCA and DB-25 input connectors, the RMB-1075 is ideally suited for either home theater applications or bi-amped systems optimized for music reproduction. Separate 12 volt “trigger” input and output jacks make this amplifier well suited for fully integrated systems with total remote control capability. Power Configurations: 5 x 120 watts Watts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD 120 watts THD (20-20,000Hz) cont. rated power one-half rated power one watt per channel 0.03%, maximum 0.03%, maximum 0.05%, maximum IM Distortion (at rated over, 60Hz:7kHz = 4:1) 0.03%, maximum Damping Factor (8 ohms) 180 Input Sens. / Impedance 1.0V / 27 k ohms Frequency Response 15-100kHz (=0.5, -3dB) S/N Ratio (IHF A) 115dB Power Consumption 800 watts Dimensions (W x H x D) 433 x 189 x 380 mm 17 1/8 x 7 1/2 x 15 Front Panel Height 176 mm, 6.9 Weight (net) 17 kg / 37.4 lbs .It will be Professionally & Safley packaged in a (non-factory) shipping box, arriving as photographed to your listed E-Bay address, Insurance & a Signature Will Be Required for delivery. Contact Me with any inquiries or questions. Thanks for looking.Please check out some of my other listings, I currently have other Rotel equipment available as well ,& along with other sweet deals on some other Great,Vintage and High-End Audio Gear.....

Rotel RMB-1512 12 Channel Amplifier. This item is used but in good working order. It does not come with anything except the unit itself and a power cable. This unit was sold previously but returned and the client reported a number of channels not working. I refunded it, including return postage and tested it. Everything tested OK. Here is a video of each channel being tested: https://youtu.be/Rs6_cLuwbAg?feature=shared I do not wish to pay for postage again or have someone buy this and return it. Therefore this is collection only. You are welcome to test the unit when you collect it.

Ampli Luxman A-312 L’amplificateur est en parfait état de fonctionnement

Used in excellent condition keep in non smoke enviroment and just a few hours! About the Rotel RMB-1512by CrutchfieldsEric A.A flexible power amp for a multi-zone sound systemRotels RMB-1512 delivers a considerable 100 watts into each of its 12 channels, rated with all channels driven. Flexible setup options let you distribute that power to up to six independent zones in a custom-installed multi-room sound system.KEEP READINGProduct highlights:100 watts per channel into 8 ohms (20-20,000 Hz) at 0.03% THD with all channels driven200 watts per channel into 4 ohmsinput linking, input mono switch and signal output link for system configuration flexibilityClass D design with thermal and overcurrent protection circuitryfrequency response: 10-40,000 Hz (±1dB)signal-to-noise ratio: 109 dBdetachable power cordrack mounting ears includedConnections:stereo RCA link input and output for daisy-chaining multiple amplifiers or other componentssix zone buses, each including:one unbalanced stereo RCA input pairfour-pin Euroblock connectorinput source switch (mono summing in zones 1 and 2 only)left and right 5-way binding post terminals3.5mm 12-volt trigger in/out with signal sensing switchDimensions and warranty:17W x 5-11/16H x 17-13/16D (3U rack spaces)weight: 24 lbs.warranty: 5 yearsMFR # ROT1030007

Rotel RMB 1512 12 Channel Power Amplifier. Power consumption - 660watts Black Good working order

Rotel RMB-1512 12 Channel mutil zone Distribution Amplifier. Removed from an AV rack in an air conditioned room. Tested and fully working. In good condition with slight marks from removal. No boxes or accessories. Full item info here https://www.rotel.com/en-gb/product/rmb-1512 Collection preferred due to the weight. Thanks for looking

Rotel RMB-1512 12 Channel mutil zone Distribution Amplifier. Removed from an AV rack in an air conditioned room. Tested and fully working. In good condition with slight marks from removal. No boxes or accessories. Full item info here https://www.rotel.com/en-gb/product/rmb-1512 Collection preferred due to the weight. Thanks for looking

Rotel RMB-1512 12 Channel mutil zone Distribution Amplifier. Removed from an AV rack in an air conditioned room. Tested and fully working. In good condition with slight marks from removal. No boxes or accessories. Full item info here https://www.rotel.com/en-gb/product/rmb-1512 Collection preferred due to the weight. Thanks for looking

Rotel RMB-1512 12 Channel mutil zone Distribution Amplifier. Removed from an AV rack in an air conditioned room. Tested and fully working. In good condition with slight marks from removal. No boxes or accessories. Full item info here https://www.rotel.com/en-gb/product/rmb-1512 Collection preferred due to the weight. Thanks for looking