Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

I have for sale my Harmon Kardon ST8 Rabco linear tracking turntable with Ortofon LM15 cartage & needle, stylist alignment gauge, owners manual and original packaging/box. The turntable is very clean and in near mint condition. Its extremely rare to see one of these fine turntables clean with low hours in its original packaging. Its time for the ST8 to find a good home when it can be enjoyed. I bought the ST8 new in 1981 from Sensuous Sound Systems in Tampa FL. My original sale receipt will be included inside the owners manual. C.D.s came out shortly after I purchased the turntable so it has spent most of its life store in its original box in my smoke free, air conditioned home. It was taken out of the box and played periodically. The turntable works exactly as it should as when it was new. The Rabco tonearm tracks/follows straight with the record with NO lead or lag. The air-pot damping/tonearm cueing system and the auto tonearm lift/shut off (at end of record) works fine. The motor speed strobe locks and holds platter speed steady. The Ortofon LM15 cartridge and needle has low hours on it. The dust cover is in great shape with no cracks. There are several light scratches on the top towards the rear and a couple of small nick on the front edge. If desired, the scratches could probably be carefully lessened or removed with plastic polish. The ST8 will be shipped in its original factory packaging/box and then placed in a second outer box for further protection. If youve been looking for a very nice H/K ST8 turntable thats ready for setup and to be plugged & played, dont miss this one! Terms... U.S. (lower 48 states) sales ONLY! The ST8 will be shipped/insured with either FedEx or UPS or USPS - depending on price. Due to the ST8s age and/or not knowing how it will used, it is is sold as-is, as described. Any questions, please contact me. Thanks for looking!

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

VINTAGE RABCO SL-8E LINEAR TRACKING TONEARM Restored - All Maintenance and Work Done According to Official Service Manual Good Condition - See Pictures Stanton Phono Cartridge Included - Brand New Stylus New Battery User and Service Manual Included Local Pickup Available

Last model in a long line of ground-breaking turntables. Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened - so kinked, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.