Description
THIS SUB IS IN FULL 100% WORKING ORDER, HAS BEEN TESTED ON MY BENCH FOR A COUPLE OF DAYS, ALL FUNCTIONS WORK AS THEY SHOULD, AUTO ON PHASE, ETC. IT IS IN EXCELLENT CONDITION, WITH VERY MINIMAL WEAR SHOWING, THE GRILL IS IN EXCELLENT CONDITION. AS A WHOLE I GIVE THIS SUB A 9 OF 10. LIKE THE TITLE SAYS ITS TINY BUT MIGHTY, SOUNDS GREAT LOUD WITHOUT DISTORTION, JUST A GOOD ALL AROUND SUB. ITS MORE SUITED FOR A SMALL TO MEDIUM SIZED ROOM. IT SOUNDED GREAT ON MY BENCH AREA.ITS REALLY NOT THAT SMALL ITS A NORMAL SIZED SUB. JUST A TAD SMALLER I WOULD NOT CALL IT TINY.THE GRILL IS I VERY GOOD SHAPE WITH A COUPLE OF VERY SMALL HOLES AROUND THE FRAME ON TOP, DONT EVEN NOTICE THEM BUT I AM LETTING YOU KNOW THAT THE ARE THERE THE LAST PHOTO , I SHOW WITH A WHITE MARKER THAT WHAT YOU SEE IS THE BLACK LAMINATE BUBBLING , NOT THE SPEAKER..UNIT WILL HAVE AN ANTI TAPER SEAL ON THE BACK PLATE ,IF REMOVED OR TAMPERED WITH THERE WILL BE NO RETURNS FOR ANY REASON, ITS THERE FOR MY SECURITY TO PREVENT PART HARVESTING ANY MANY OTHER SOME BUYERS DO TO TRY TO BEAT THE SYSTEM. SORRY ITS COME TO THAT IN THIS DAY AND AGE. THERE SHOULD BE NO REASON TO REMOVE THE BACK AMP. IT IS IN 100% WORKING ORDER.YOU WILL GET A PHOTO OF THE SEAL ON THE UNIT SO ALL WHO NEEDS TO KNOW WILL. DOES COME WITH DETACHABLE POWER CABLE... Tiny but mighty Polk Audio PSW111 Add impact to your favorite movies and full-bodied bass to your favorite tunes with a sub thats barely larger than a cubic foot. The PSW111s high-current, 150-watt amp effortlessly drives an 8 woofer for dynamic low-frequency effects. And this compact subwoofer sports a new, more powerful driver design to deliver deeper, louder, and punchier bass than previous Polk subs. Special circuitry inside the amp and a solid MDF cabinet with internal bracings ensure clean, detailed lows, even when you crank up the volume.Features & specs Enclosure Bass Reflex Woofer Size (inches) 8 Woofer Composition DB Composite Firing Direction Front Amplifier Output (watts) 150 Frequency Response 38-250 Hz Connections Preamp-Level Inputs Yes Speaker-Level Inputs Yes Speaker-Level Outputs Yes Wireless No Controls Low-Pass Crossover Freq 60-160 Hz High-Pass Crossover Freq None Phase Switch Yes App Control No Remote No Other Info Height (inches) 12-5/16 Width (inches) 11-1/16 Depth (inches) 14-15/16 Weight 20.3 lbs Product Research Features Controls Connections Features Driver: The Polk Audio PSW111 uses a 8 Dynamic Balance composite cone driver for deep, accurate response with low distortion. For a smoother response and improved durability, the woofer utilizes a rubber surround. Klippel Optimized Woofer: By using a state-of-the-art Klippel Distortion Analyzer, Polk is able to optimize the woofers motor structure, voice coil alignment and suspension for the best possible performance even at extreme listening levels. Motor Structure: The PSW111 utilizes a powerful motor structure for a higher BL response (the measure of the motive force applied to the cone) that results in louder, deeper and punchier bass. Compression Circuitry: The woofers Compression Circuitry limits distortion at high volume levels. Amplifier: The subwoofer is powered by a high-current amplifier producing 150 watts RMS/300 watts dynamic power that supplies clean power for loud bass and the wide dynamic range necessary to recreate a life-like experience in your home. Enclosure: The PSW111 features a bass-reflex enclosure with non-resonant MDF construction and internal bracing for deep bass impact with superior detail and accuracy. Down-Firing Port: The powered subwoofers downward firing port allows the woofer to be extremely efficient and provides more bass impact for your home theater experience. Not Video Shielded: The subwoofer is not magnetically shielded, so it is not recommended to place it next to tube TVs and video monitors. Though LCD, DLP, and Plasma televisions are not affected by magnetism you should allow at least 18 of space between the subwoofer and any TV. Placement: You may place the subwoofer anywhere in your room, but it will perform best when its on the same side of the room as your systems front speakers. Also, placing the subwoofer near a wall or in a corner will reinforce the output. Controls 3-Way Power Switch: The subwoofer has a 3-way power switch on the rear panel. You can select Auto, which turns the unit on automatically when an input signal is received and off 15 minutes after the signal stops; On, which keeps the unit on and Standby, which turns the unit off. The LED power indicator glows green when the unit is on and red when the unit is off. Volume Control: The PSW111 has a rotary volume control to adjust the volume of the subwoofer relative to the other speakers in the system. Phase Switch: The subwoofers phase switch allows you to select 0-degrees (normal) or 180-degrees (reverse). If the bass sounds muddy or unclear, toggling the phase control can sometimes strengthen the bass attack. Low-Pass Filter: The PSW111 offers a continuously variable low-pass crossover, adjustable from 60-160 Hz. There is an LFE position for use with the filtered LFE output from a receiver or preamp. Connections Line Inputs: The subwoofer has gold plated left and right RCA line level inputs for use with receivers having subwoofer or stereo preamp outputs that do not contain their own low-pass crossover. Using the Line Inputs allows PSW111 to do all the low-pass filtering. If your receiver or processor only has a single subwoofer line output, connect it to the Right line input jack. LFE In: The right channel RCA input doubles as the LFE input; if your receiver has an LFE output and a built-in crossover, use this input and set the low-pass filter dial to LFE. Speaker Level Input/Output: The subwoofer has spring clips for the speaker level inputs and outputs. The subwoofers low-pass filter sends bass frequencies (based on the setting of the filter) to the subwoofer. The speaker level inputs and outputs are shorted together, so the output is not crossed over. You should set you receivers front speaker setting to Large.
| 
Live search