Remote is clean and working , thanks for looking !

Greetings! We’re selling a great remote control that will work with several Marantz devices, this is the RC-66PM Black OEM model that works with devices: - PM-66 - PM-66SE - PM-57 The remote is in amazing condition and works perfectly, don’t hesitate to reach out for anything at all, thanks for looking! — Retro Emporium

Marantz PM-66SE - KI Signature version with remote - Excellent Condition. Superb sound - classic Marantz warmth. Excellent phono stage - a really great pairing with analogue sources as well as digital. This is in excellent condition. Its a single owner unit from a smoke pet and child-free home. Great provenance - I have the original bill of sale from Weybridge Audio - dated 1999. It was serviced professionally once in its life and is fully operational having been given a recent clean bill of health from my technician. These are getting rare to find, let alone in this condition. Cosmetically a couple of minor blemishes - nothing at all offensive - these are pictured. Comes with the original remote. No original box, but does come with the manual, and will be packaged very well for UK mainland buyers only.

Greetings! We’re selling a great remote control that will work with several Marantz devices, this is the RC-66PM Black OEM model that works with devices: - PM-66 - PM-66SE - PM-57 The remote is in amazing condition and works perfectly, don’t hesitate to reach out for anything at all, thanks for looking! — Retro Emporium

You are bidding on a Marantz PM-66SE in very good condition and with everything working as it should (there was a little cracle through one channel, but this seemed to go away when I tested it before removing from my system - could probably do with a clean just in case). Only selling as I have upgraded to a 6010 KI signature. The only thing missing is the ground for the turntable input, but these are cheap to buy and install. Details as follows: TypePre-main amplifierInput / output terminalLine Entry : Route 3Tape input / output : 2 systemsPhono input : 1 systemSpeaker output : 1 systemRated output70W + 70W (4 ?)60W + 60W (6 ?)50W + 50W (8 ?)Total harmonic distortion factor0.03%Frequency characteristic10 Hz ~ 100 kHz + 0 -3dBSignal-to-noise ratioHigh Level:106dBPower consumption90W (Electrical Appliance and Material Control Law)Maximum external dimensionsWidth 439x Height 137.5x Depth 343 mmWeight6.6kgAttachmentWireless Remote Control These amps were very well reviewed when they came out and the KI version was listed in the top 19 amplifiers of What Hifis lifetime (http://www.hifi-review.com/150158-marantz-pm66se.html). Any qs just let me know.

Marantz PM-66SE - KI Signature with remote Excellent Condition.

Classic Signature Sound, selling due to house downsizing.

Marantz pm 66se ki Signature Integrated Amplifierplease see description for buying advice this is another nice item from my massive private hifi and parts collection liquidation coming to the end of the separates now but there are still some lovely items to be listed so if this kind of kit is your bag please add me to your favorites for new listings notifications* due to progressing illness i am now only selling Friday-Sunday and posting on Mondays Free RM 48 postage included > more info Marantz PM-66Stereo Integrated Amplifier Power output: 50 watts per channel into 8? (stereo)Frequency response: 5Hz to 70kHzTotal harmonic distortion: 0.008%Damping factor: 100Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 87dB (MM), 97dB (line)Channel separation: 65dB (line)Speaker load impedance: 4? to 16?Dimensions: 439 x 138 x 343mmWeight: 6.7kgYear: 1997

Marrantz PM-66 KI Signature Fully working (phono stage untested) Very good physical condition, no dents or major scratches, please see images. Delivery 48 hour tracked. “The KI Signature appendage means that the product in question has been reworked personally by Marantz's audiophile wizard Ken Ishiwata. “ “The unit also looks the part. A wholesale change to copper plating for the chassis and rear panel, aimed at improving the earthing at all stages and controlling the effects of interference from the eddy currents present, that can spoil the sonic enjoyment, “ “Near one end is a new design of toroidal transformer, extra deep and using high purity copper wire on a high-grade core, with a copper top plate to finish things off. Next, between parallel many vaned heatsinks for the output stages, comes a single high-quality printed circuit board carrying all the components apart from those mounted immediately behind the front panel. Special care has been taken over the design of the (moving-magnet) phono stage as a reminder of Ishiwata's audiophile compulsions.” Cramond, R. (2012) Review: Marantz PM-66K1 Signature integrated amplifier. Available at: https://www.gramophone.co.uk/features/article/review-marantz-pm-66k1-signature-integrated-amplifier

TypeIntegrated Stereo AmplifierNumber of channels2Output Power (8 Ohm)50 WFrequency Response5 - 70000 HzSignal/noise ration97 dBTotal harmonic distortion0,008 %Input Sensitivity (line)150 mVInput Impedance (line)33 kOhmInput Sensitivity (MM)2,5 mVInput Impedance (MM)47 kOhmDimensions (WxHxD mm)439x138x343Weight (kg)6,7

Marantz pm 66se ki Signature Integrated Amplifier tested and working NO REMOTE

TypeIntegrated Stereo AmplifierNumber of channels2Output Power (8 Ohm)50 WFrequency Response5 - 70000 HzSignal/noise ration97 dBTotal harmonic distortion0,008 %Input Sensitivity (line)150 mVInput Impedance (line)33 kOhmInput Sensitivity (MM)2,5 mVInput Impedance (MM)47 kOhmDimensions (WxHxD mm)439x138x343Weight (kg)6,7

Marantz PM-66SE Special Edition Integrated Stereo Amplifier with PHONO (MM) Excellent condition and tested. Shows minimal signs of previous use with a few light marks (see photos) most of which are not visible without close inspection. Remote control NOT included Specifications:Power output: 50 watts per channel into 8? (stereo)Frequency response: 5Hz to 70kHzTotal harmonic distortion: 0.008%Damping factor: 100Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 87dB (MM), 97 dB (line)Channel separation: 65dB (line)Speaker load impedance: 4? to 16?Dimensions: 439 x 138 x343mmWeight: 6.7kgYear: 1996

Marantz PM-66SE Special Edition Amplifier. Slight crackle on 1 of the stations east fix for someone other than that lovely condition

Marantz PM-66SE Special Edition Integrated Stereo Amplifier with PHONO (MM). Being played with my B&W DM303 delivering beatiful detailed sound. Post to UK only.

MARANTZ PM-66SE HiFi Amplifier : for parts not working Has an issue when you first turn it on which causes the sound to be crackly. It appears to stop doing it after about half hour. I imagine it could the pots in the volume knob or a dry joint somewhere. When it stops being crackly it does sound great. I imagine for someone with experience this could be an easy fix Photos of the innards so you can see how clean it is

A superb and very sought after Amplifier from the heyday off Japanese HIFI from one the most renowned marques Any KI Signature piece from Marantz is going to be sought after, we have been donated this and a CD 63 mkii KI signature (see Separate sale) i have found the specification and listed below, The KI Signature series were tweaked personally by the mastermind of all things Marantz Ken Ishiwata he would upgrade nearly every component as if he were making the item for his own personal use. This made the subsequent item expensive as no expense was spared and some components engineered in house specifically for the KI series. The chassis were made in Singapore but assembled and upgraded in the UK, Comes with dedicated remote, this is a collection only. Please note this is an auction only sale. Dimensions (WHD)439 x 138 x 343 mm / 17.3 x 5.4 x 13.5 inchNotesA Ken Ishiwata designed hi-fi integrated stereo amplifier housed in a black metal case with power output 2 x 50 watts RMS into 8 ohms, with a full system infrared remote control (RC66-PM). It is a modified version of the Marantz model PM-66SE with a copper plated chassis, a toroidal mains transformer and upgraded capacitors. With rotary Volume and Balance controls, rotary Input Selector switch (Phono, CD, Tuner, Aux), push button switches for Balance Direct, Tape1, Tape2 and copy Tape2?Tape1, jack for Headphones and on the remote control only buttons for Mute and motorised Volume Control. On the back, a Ground connection, RCA phono sockets for input Aux, Tuner, CD and Phono (MM), for input/output Tape1 and Tape2, input/output terminals for remote control and terminals for one pair of loudspeakers.Specification Power output RMS 8?/4? DIN 8?/4?50/70W55/75WIHF dynamic power 8?/4?80/110WTHD at 8? rated output0.008%Intermodulation distortion0.008%Damping factor 100Magnetic cartridge input Input sensitivity inpedance2.5mV/47k?Accuracy of frequency response to IEC RIAA0.5dBSignal to noise ratio (IHF A weighted)87dBTuner/CD/Aux/Tape inputs Input sensitivity impedance150mV/33k?Signal to noise ratio (A weighted)97dBFrequency response (-3dB limits)5Hz-70kHzChannel separation (1kHz/10kHz) >85/65dB Sold on behalf of St. Catherines Hospice, Crawley Please note we are in the office 3 times a week. There may be a delay responding to your email.Collection only.

Marantz PM-66SE Special Edition Amplifier. Slight crackle on 1 of the stations east fix for someone other than that lovely condition

Marantz PM-66SE Special Edition Amplifier. Great sound with Aux, CD, Tuner and Phono inputs. Good working order but no longer required. Has some marks and scratches as shown in the photos. No remote or instructions. Will be sent well packaged with bubble wrap inside a sturdy box.

Marantz PM-66SE Special Edition Integrated Stereo Amplifier with PHONO (MM) Excellent condition and tested. Shows minimal signs of previous use with a few light marks (see photos) most of which are not visible without close inspection. Remote control NOT included Specifications:Power output: 50 watts per channel into 8? (stereo)Frequency response: 5Hz to 70kHzTotal harmonic distortion: 0.008%Damping factor: 100Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 87dB (MM), 97 dB (line)Channel separation: 65dB (line)Speaker load impedance: 4? to 16?Dimensions: 439 x 138 x343mmWeight: 6.7kgYear: 1996

MARANTZ PM-66SE HiFi Amplifier : Tested /Working, Nice Condition. Tested using a marantz cd player All sounds great still. Photos of the innards so you can see how clean it is

Marantz PM-66SE Special Edition Amplifier. Slight crackle on 1 of the stations east fix for someone other than that lovely condition

MARANTZ Integrated Stereo Amplifier PM-66SE Hi-Fi Component Amp WORKING - L41. Good working condition with a few scratches in places

Marantz Integrated Stereo Amplifier PM-66SE Special Edition, Working. Instructions This was my daughters & it’s in good used condition. We tested this with a cassette tape player & it worked fine. We have the instruction manual to go with it. The plug is a flip top one as shown in the last picture. Please see all photos for condition. If you have any questions or would like more images, please get in touch. This will be carefully packed & sent by Royal Mail 48hr Tracked to any UK postal address. Thanks for looking.