Item TitlePhasemation/Phase Tech Ea-3 Phono Equalizer Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Technics SB - F3 Linear Phase Speakers. In good condition have a scratch on the back and has skme marks from general use any questions please ask more photos can be provided

TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING This unit produces clear and loud sounds. Please note unit has several blemishes on the exterior (scruffs/scratches/dings). Also the speaker mesh is missing 3 push in plastic-screw to secure to the speaker, see last few pictures.COMPONENTS INCLUDED IN THIS AUCTION: • (1) - PHASE TECHNOLOGY TEATRO V-3.0 FLAT PANEL SOUNDBAR 2-WAY SPATIAL FIELD EXPANDERSREPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. Please Click Here to Visit Our Store at > at src=https://www.ocdepot.com/template/Rounded_Middle_Right.gif /> at src=https://www.ocdepot.com/template/Rounded_Left_Bottom.gif /> at > at src=https://www.ocdepot.com/template/Rounded_Middle_Bottom.gif /> at src=https://www.ocdepot.com/template/Rounded_Right_Bottom.gif /> SearchBy37 - 236890 | Loc: A7D | L: Jessica Vuong | T: | PM: EDDIE PM | QTY: 0 | Plan: L1- Q2 5 pounds or more | 43.00x10.00x8.00 35.00lbs | Start: $24.95 | BIN: $0.00 | | 1/7/2022 | | 177

AD8302 Amplitude Phase Detector 0.1- 2.7GHz Signal Phase Detector Log X6B3 The RF signal relative amplitude and phase detector, using AD8302 chip, is a fully integrated RF IC, which is used to measure the amplitude and phase between two input signals. The device operates from low frequencies to 2.7GHz. Can be used for gain detection, standing wave ratio measurement.AD8302 contains two precision matched wideband logarithmic amplifiers, a wideband linear multiplier/phase detector, 18V precision reference voltage source, and analog output ratio operation circuit. Input signal range is -60 dBm 0dBm (reference impedance 50 ohm), corresponding dynamic range is 60dB 10mv/degree.AD8302 is a monolithic integrated circuit for rflIFh degree and phase measurement. It is mainly composed of two precisely matched wideband logarithmic detectors, a phase detector, an output amplifier group, a bias unit and an output reference voltage buffer.It can simultaneously measure the amplitude ratio and phase difference between two input signals in the range from low frequency to 27Ghzb rate. It can be applied to the measurement of the linear ratio of RF/FT rate amplifiers, the precise control of RF power, the measurement of standing wave ratio and the measurement of remote system. monitoring and diagnostics, etc.Type:Voltage RegulatorCondition:Newcolor:GreenMaterial:plasticPackage Contents:1 x Log Amplifier

1X(AD8302 Amplitude Phase Detector 0.1- 2.7GHz Signal Phase Detector Log 1X(The RF signal relative amplitude and phase detector, using AD8302 chip, is a fully integrated RF IC, which is used to measure the amplitude and phase between two input signals. The device operates from low frequencies to 2.7GHz. Can be used for gain detection, standing wave ratio measurement.AD8302 contains two precision matched wideband logarithmic amplifiers, a wideband linear multiplier/phase detector, 18V precision reference voltage source, and analog output ratio operation circuit. Input signal range is -60 dBm 0dBm (reference impedance 50 ohm), corresponding dynamic range is 60dB 10mv/degree.AD8302 is a monolithic integrated circuit for rflIFh degree and phase measurement. It is mainly composed of two precisely matched wideband logarithmic detectors, a phase detector, an output amplifier group, a bias unit and an output reference voltage buffer.It can simultaneously measure the amplitude ratio and phase difference between two input signals in the range from low frequency to 27Ghzb rate. It can be applied to the measurement of the linear ratio of RF/FT rate amplifiers, the precise control of RF power, the measurement of standing wave ratio and the measurement of remote system. monitoring and diagnostics, etc.Type:Voltage RegulatorCondition:Newcolor:GreenMaterial:plasticPackage Contents:1 x Log Amplifier)

AD8302 Amplitude Phase Detector 0.1- 2.7GHz Signal Phase Detector Log Detector The RF signal relative amplitude and phase detector, using AD8302 chip, is a fully integrated RF IC, which is used to measure the amplitude and phase between two input signals. The device operates from low frequencies to 2.7GHz. Can be used for gain detection, standing wave ratio measurement.AD8302 contains two precision matched wideband logarithmic amplifiers, a wideband linear multiplier/phase detector, 18V precision reference voltage source, and analog output ratio operation circuit. Input signal range is -60 dBm 0dBm (reference impedance 50 ohm), corresponding dynamic range is 60dB 10mv/degree.AD8302 is a monolithic integrated circuit for rflIFh degree and phase measurement. It is mainly composed of two precisely matched wideband logarithmic detectors, a phase detector, an output amplifier group, a bias unit and an output reference voltage buffer.It can simultaneously measure the amplitude ratio and phase difference between two input signals in the range from low frequency to 27Ghzb rate. It can be applied to the measurement of the linear ratio of RF/FT rate amplifiers, the precise control of RF power, the measurement of standing wave ratio and the measurement of remote system. monitoring and diagnostics, etc.Type:Voltage RegulatorCondition:Newcolor:GreenMaterial:plasticPackage Contents:1 x Log Amplifier

3X(AD8302 Amplitude Phase Detector 0.1- 2.7GHz Signal Phase Detector Log 3X(The RF signal relative amplitude and phase detector, using AD8302 chip, is a fully integrated RF IC, which is used to measure the amplitude and phase between two input signals. The device operates from low frequencies to 2.7GHz. Can be used for gain detection, standing wave ratio measurement.AD8302 contains two precision matched wideband logarithmic amplifiers, a wideband linear multiplier/phase detector, 18V precision reference voltage source, and analog output ratio operation circuit. Input signal range is -60 dBm 0dBm (reference impedance 50 ohm), corresponding dynamic range is 60dB 10mv/degree.AD8302 is a monolithic integrated circuit for rflIFh degree and phase measurement. It is mainly composed of two precisely matched wideband logarithmic detectors, a phase detector, an output amplifier group, a bias unit and an output reference voltage buffer.It can simultaneously measure the amplitude ratio and phase difference between two input signals in the range from low frequency to 27Ghzb rate. It can be applied to the measurement of the linear ratio of RF/FT rate amplifiers, the precise control of RF power, the measurement of standing wave ratio and the measurement of remote system. monitoring and diagnostics, etc.Type:Voltage RegulatorCondition:Newcolor:GreenMaterial:plasticPackage Contents:1 x Log Amplifier)

AD8302 Amplitude Phase Detector 0.1- 2.7GHz Signal Phase Detector Log F3D8 The RF signal relative amplitude and phase detector, using AD8302 chip, is a fully integrated RF IC, which is used to measure the amplitude and phase between two input signals. The device operates from low frequencies to 2.7GHz. Can be used for gain detection, standing wave ratio measurement.AD8302 contains two precision matched wideband logarithmic amplifiers, a wideband linear multiplier/phase detector, 18V precision reference voltage source, and analog output ratio operation circuit. Input signal range is -60 dBm 0dBm (reference impedance 50 ohm), corresponding dynamic range is 60dB 10mv/degree.AD8302 is a monolithic integrated circuit for rflIFh degree and phase measurement. It is mainly composed of two precisely matched wideband logarithmic detectors, a phase detector, an output amplifier group, a bias unit and an output reference voltage buffer.It can simultaneously measure the amplitude ratio and phase difference between two input signals in the range from low frequency to 27Ghzb rate. It can be applied to the measurement of the linear ratio of RF/FT rate amplifiers, the precise control of RF power, the measurement of standing wave ratio and the measurement of remote system. monitoring and diagnostics, etc.Type:Voltage RegulatorCondition:Newcolor:GreenMaterial:plasticPackage Contents:1 x Log Amplifier

Technics SB - R3 Linear Phase Speakers. Not tested, sold as seen

VINTAGE TECHNICS SB-F5 LINEAR PHASE 2 WAY SPEAKER SYSTEM 2 X SPEAKERS IN USED CONDITION COMES WITH ATTACHED CABLES I HAVE NOT TESTED THEM, ONE WIRE SCREW MISSING ON THE REAR COLLECTION WELCOME