Original Innenteller With Bearings for Turntable Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Inner plate with bearingOriginal Yamaha PF 800very good conditionInner plate with bearing Original Yamaha PF 800 very good condition Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Plattenteller EAN Nicht zutreffend

Revised Turntable Yamaha PF-800 Black High Gloss Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 black high glossstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood including hinges: 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 220Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffe Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Your Choice! Revised Turntable Yamaha PF-800 Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself. Also possible in two colors!You can choose the color of the housing and the cover plate yourself. Two-tone also possible!Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Blue (elliptical, naked): €220Ortofon 2M Bronze (Fineline): €390Audio-Technica VM760SLC (special line contact): €699Cartridge MC System including installation:Audio-Technica AT33SA (Shibata): €799You can choose the color of the housing and the cover plate yourself. Also possible in two colors! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Front Plate Front Panel Control Panel Yamaha PF-800The description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original front panel front panel control panelYamaha PF-800very good used conditionOriginal front panel front panel control panel Yamaha PF-800 very good used condition Marke Yamaha Markenkompatibilität Für Yamaha Produktart Frontplatte EAN Nicht zutreffend

Original Weight for Cartridge Yamaha PF-800 1000 Additional Distance PlatesThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original weight for cartridge Yamaha PF-800 / 1000 additional weight spacer platesMaterial: metallic, non-magneticOriginal weight for cartridge Yamaha PF-800 / 1000 additional weight spacer plates Material: metallic, non-magnetic Marke Yamaha Markenkompatibilität Yamaha PF-800 Produktart Distanzplättchen EAN Nicht zutreffend

The arm support part is not normal, it rises and falls quickly, all other functions work well No dust bag as is

Gebraucht sehr gut erhalten.

Your Choice! Revised Turntable Yamaha PF-800 Gold EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself.You can choose the color of the housing and the cover plate yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): €339Audio-Technica VM750SH (Shibata): €439Audio-Technica VM760SLC (special line contact): €699 Cartridge MC System including installation: Audio-Technica AT33EV (elliptical): €499Audio-Technica ATPTG/II (microlinear): €599Audio-Technica AT33SA (Shibata): €799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Instal Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 silver blueSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood including hinges: 190LED lighting (see picture 4): 149XXL device feet made of stainless steel, height adjustable (see picture 2): 133Stainless steel control element (see picture 5): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of

Original Turntable Yamaha PF-800 Gold Edition Very Good Conditions (Working).

Revised Turntable Yamaha PF-800 Stainless Steel, Silver And BlueThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more interesting offers from us. Take a look at... Art and Sound Germany Yamaha PF-800 silver blueSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable and power cable permanently installedOur turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: approx. 15kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the record)The following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood including hinges: 190LED lighting (see picture 4): 149XXL device feet made of stainless steel, height adjustable (see picture 2): 133Stainless steel control element (see picture 5): 179Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799The original housing is refurbished, the wooden structure is removed, painted with several layers of paint and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The spring caps are re-turned from full stainless steel and the old suspension is replaced with stronger suspension. Power cable and cinch cable are replaced. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Front Plate Front Panel Control Panel Yamaha - PF-800 With 2 CapsThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original front panel, control panel and 2 cover caps for the fastening screwsYamaha PF-800usedOriginal front panel, control panel and 2 cover caps for the fastening screws Yamaha PF-800 used Marke Yamaha Markenkompatibilität Für Yamaha Produktart Frontplatte EAN Nicht zutreffend

Plattenspieler Turntable Yamaha PF-800 mit Tonabnehmer Ortofon MC-20. Dazu der Moving Coil Transformator Ortofon STM-20 !! Voll funktionsfähig, kann bei Abholung probegehört werden. Der Plattenspieler ist gebraucht und wird ohne Garantie angeboten. Die Abdeckhaube fehlt !!! Ein neuer Antriebsriemen ist verbaut. KEIN Versand! NUR an Selbstabholer! Ich bin leider nicht in der Lage den Spieler so zu verpacken, dass er einen Transport per Post ohne Schaden übersteht! Es wäre sehr schade wenn dadurch ein Defekt entsteht.

Original Turntable Yamaha PF-800 Gold Edition Very Good Conditions (Working).

Tested Output is distorted scratchy static 33-45 are working Cueing works Left and right channels work with static and distortion Cosmetically in great shape Comes with the cartridge and box, original box, dust cover has missing hinges Will come with an extra new old stock belt not opened Extra head shell new old stock Please check all pictures provided Will be packaged in a double wall box and styrofoam all around Sold as is for parts or repair

Original Turntable Yamaha PF-800 Gold Edition Very Good Conditions (Working).

Plattenspieler Turntable Yamaha PF-800 mit Tonabnehmer Ortofon MC-20. Dazu der Moving Coil Transformator Ortofon STM-20 !! Voll funktionsfähig, kann bei Abholung probegehört werden. Der Plattenspieler ist gebraucht und wird ohne Garantie angeboten. Die Abdeckhaube fehlt !!! Ein neuer Antriebsriemen ist verbaut. KEIN Versand! NUR an Selbstabholer! Ich bin leider nicht in der Lage den Spieler so zu verpacken, dass er einen Transport per Post ohne Schaden übersteht! Es wäre sehr schade wenn dadurch ein Defekt entsteht.

Le phonographe fonctionne avec 220V/50HzPour lexpédition aux États-Unis, le plateau tournant est converti en 110 V/60 Hz.YamahaPF-800Semi-automatique avec fonction de levage et fin de courseNouveau Ortofon Vinyl Master AlphaNouveau câble audio RCA dOehlbach (installé en permanence)Nouveau bracelet Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme.La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante.Données techniques:Courroie dentraînementVitesse : 33 1/3 et 45 (réglage manuel fin possible)Fluctuations de synchronisation : 0,028 %Distance du bruit de grondement : 80 dBPlateau tournant : plaque principale en aluminium moulé sous pression, sous-plateau en zinc moulé sous pressionEmplacement : 6%Sorties : 2x câble RCA, 1x câble de masseConsommation électrique : 7 wattsDimensions: 47,3 x 37,6 x 15,4 cmPoids : 13kgParticularités :Coquille amovibleSous-châssis, monté pour osciller librement sur trois ressorts coniquesmatériaux stables et de haute qualitéBras de lecture jumeauxBras de lecture réglable en hauteurLift Adjust (le point de levage du bras de lecture peut être ajusté à la fin de lenregistrementCe qui suit les pièces sont comme Accessoiresör euhunliltique et pas composant ce enchères:Capot inclus. Systèmes à cartouche MM avec installation :Systèmes Cartidge MC incluant linstallation :Pour lexpédition aux États-Unis, le plateau tournant est converti en 110 V/60 Hz. Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Plateau tournant : plaque principale en aluminium moulé sous pression, sous-plateau en zinc moulé sous pression Lift Adjust (le point de levage du bras de lecture peut être ajusté à la fin de lenregistrement Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas composPour lexpédition aux États-Unis, le plateau tournant est converti en 110 V/60 Hz. Avec la série VM, Ortofon crée depuis longtemps la cartouche MM de référence, dont le long temps de production et le corps daiguille caractéristique sont bien connus dans le monde entier. La VM Alpha est lentrée dans la série des platines vinyles de milieu de gamme. La série VM dOrtofon est compatible entre elles. Vous pouvez donc commencer avec une VM Alpha puis améliorer la qualité en utilisant la fente daiguille suivante. Plateau tournant : plaque principale en aluminium moulé sous pression, sous-plateau en zinc moulé sous pression Lift Adjust (le point de levage du bras de lecture peut être ajusté à la fin de lenregistrement Ce qui suit les pièces sont comme Accessoiresör euhunliltique et pas compos

Original Turntable Yamaha PF-800 Stainless Steel EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)!Yamaha PF-800Semi-automatic with lift function and limit switchHeight-adjustable stainless steel feetNew Ortofon Vinyl Master AlphaNew RCA audio cable from Oehlbach (permanently installed)New strapWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 14.4kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood incl. Cartridge MM including installation: Ortofon 2M Blue (elliptical, naked): €219 Ortofon 2M Bronze (fine line): €360Ortofon Vinyl Master Silver (Fritz Gyger): €490Cartridge MC including installation:Quinted Bronze (fineline diamond cut): €640 Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example UNITED STATES)! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record The following Parts are as Accessoriesör erhäliltic and not component this auction: The following par Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Your Choice! Revised Turntable Yamaha PF-800 Stainless SteelThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself. Also possible in two colors!You can choose the color of the housing and the cover plate yourself. Two-tone also possible!Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorstainless steel editionSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Blue (elliptical, naked): €220Ortofon 2M Bronze (Fineline): €390Audio-Technica VM760SLC (special line contact): €699Cartridge MC System including installation:Audio-Technica AT33SA (Shibata): €799You can choose the color of the housing and the cover plate yourself. Also possible in two colors! With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Turntable Yamaha PF-800 Gold Edition Top ConditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.The phonograph works with 220V/50HzFor shipping to the USA the turntable is converted to 110V/60HzYamaha PF-800Semi-automatic with lift function and limit switchNew Ortofon Vinyl Master AlphaNew RCA audio cable from Oehlbach (permanently installed)New strap With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following Parts are as Accessoriesör erhäliltic and not component this auction:Hood incl. Cartridge MM systems including installation:Cartidge MC systems including installation:For shipping to the USA the turntable is converted to 110V/60Hz New RCA audio cable from Oehlbach (permanently installed) With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Turntable: main plate die-cast aluminum, sub-platter die-cast zinc Subchassis, mounted to swing freely on three conical springs Lift Adjust (lifting point of the tonearm can be adjusted at the end of the record The following Parts are as Accessoriesör erhäliltic and not component this aucti Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Your Choice! Revised Turntable Yamaha PF-800 Gold EditionThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing and the cover plate yourself.You can choose the color of the housing and the cover plate yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Yamaha PF-800 in your desired colorSemi-automatic with lift function and limit switchOrtofon Vinyl Master Alpha pickupRCA audio cable from Oehlbach (permanently installed)Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Technical data:Drive beltSpeed: 33 1/3 and 45 (manual fine adjustment possible)Synchronization fluctuations: 0.028%Rumble noise distance: 80dBTurntable: main plate die-cast aluminum, sub-platter die-cast zincPitch: 6%Outputs: 2x RCA cable, 1x ground cablePower consumption: 7 wattsDimensions: 47.3 x 37.6 x 15.4cmWeight: 13kgSpecial features:Removable headshellSubchassis, mounted to swing freely on three conical springshigh-quality, stable materialsTwin tonearmsTonearm height adjustableLift Adjust (lifting point of the tonearm can be adjusted at the end of the recordThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance test Pickup (included): Ortofon VinylMaster AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. Housing:Painted in your desired color!The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction: Cartridge MM system including installation:Audio-Technica VM740ML (microlinear): €339Audio-Technica VM750SH (Shibata): €439Audio-Technica VM760SLC (special line contact): €699 Cartridge MC System including installation: Audio-Technica AT33EV (elliptical): €499Audio-Technica ATPTG/II (microlinear): €599Audio-Technica AT33SA (Shibata): €799The high-quality housings are restored or newly manufactured using qualified craftsmanship. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality by using the next needle slot. The original housing is refurbished, painted with several layers of paint in your desired color and then sealed with clear varnish. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. There are four height-adjustable ones on the bottom of the case SPIKES Instal Herstellernummer nicht zutreffend Marke Yamaha EAN Nicht zutreffend Modell PF-800

Original Frame Housing Panel Plate for Yamaha PF-800 TurntableThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Original frame housing plate for Yamaha PF-800 turntable top conditionOriginal frame housing plate for Yamaha PF-800 turntable top condition Herstellernummer nicht zutreffend Marke Yamaha Markenkompatibilität Yamaha Produktart Zarge EAN Nicht zutreffend

Façade dorigine, panneau de commande et 2 caches pour les vis de fixationYamahaPF-800utiliséFaçade dorigine, panneau de commande et 2 caches pour les vis de fixation YamahaPF-800 utiliséFaçade dorigine, panneau de commande et 2 caches pour les vis de fixation YamahaPF-800 utilisé