VINTAGE PASO TR 50 AMPLIFIER MADE IN ITALY TESTED FOR POWER ONLY

Paso Sound Products DMA 3060 DESCRIPTION AND APPLICATIONS ? ? High Performance - High Reliability Design ? ? Wide Frequency Response - Very Low Distortion ? ? 5 Channel Inputs - 2 Zone Outputs ? ? Up to 3 Balanced Microphone Inputs ? ? Phantom Power on all MIC Inputs ? ? MIC 2/AUX 1 and MIC 3/AUX 2 Inputs With Stereo Summing ? ? AUX1 and AUX2 Inputs Attenuator ? ? 600 ohm Transformer Balanced Telephone Paging Input ? ? MIX Buss and 600 ohm Line Output ? ? Independent Input Controls ? ? AUX1 Remote Volume Controls ? ? External EQ Link ? ? Tone by-pass and EQ Link switches ? ? Addressable VOX Buss Voice Activated Muting ? ? VOX Variable Time Delay Function ? ? Addressable MUTE Buss ? ? Direct Muting and Unmuting ? ? 600 ohm and 8 ohm 2 Watt Max. Music on Hold Amplifier ? ? MOH Amplifier Source Selector ? ? Zone 2, 2 Watt - 8 ohm Output with Separate Control ? ? 24 V DC 250 mA Regulated Power Supply Output ? ? 8 ohm, 25 Volt & 70 Volt Output ? ? Optional 19 Rack Mounting with Kit ? ? Low profile - 2-Unit of Vertical Rack space ? ? UL 6500 Listed (US - CANADA) SPECIFICATIONS POWER OUTPUT: DMA3060 DMA3120 Distortion: 0.01% THD at 1 kHz rated power Frequency Response: 20 hz - 30 Khz ± 2 dB Inputs: Input 1 MIC Electronically Balanced, Transformer Balanced with MT250 (optional) Input 2 Telephone Transformer Balanced Input 3 MIC Electronically Balanced - AUX 1 (Stereo Sum.) Input 4 MIC Electronically Balanced - AUX 2 (Stereo Sum.) Input 5 Module Port Sensitivity & Z: Input 1 Mic 1 = 1.5 Mv - 250 ohm Input 2 Tel =100 Mv - 600 ohm - Transformer Balanced Input 3 Mic 3 = 1.5 Mv - 250 ohm - AUX 1 = 100 Mv - 47K ohm Input 4 Mic 4 = 1.5 Mv - 250 ohm - AUX 2 = 100 Mv - 47K ohm Input Attenuator: AUX 1 and AUX 2 Phantom Power: All Microphone Inputs by internal jumper (18 V) Mic -70 db, Aux -75 db 600 ohm Transformer balanced Hum & Noise: Telephone Paging Input: 600 ohm Transformer Balanced EQ LINK: Preamp. out, Power Amp in with EQ Link Switch Line Output: Line Out 600 ohm - 1.5 V loaded Inputs/Outputs: MIX BUSS Zone 1 Output: 2 Watt Max. - 8 ohm with Control Music on Hold Output: 600 ohm-1 Volt Transformer Balanced Zone 2 Output: 2 Watt Max. - 8 ohm with Control Main Output Impedance: 8 ohm, 25 Volt and 70 Volt line Controls: Front Panel: Input 1 Volume, Input 2 Volume, Input 3 Volume, Input 4 Volume, Module Volume, Bass and Treble Rear Panel: AUX 1 Attenuator - AUX 2 Attenuator, VOX1 Sensitivity, VOX2 Sensitivity, MOH/ZONE 1 Level Control - ZONE 2 Level Control - VOX Sensitivity - MUTE Delay Tone Controls: Bass and Treble ± 10 dB at 100 hZ and 10 KHz Tone By-Pass: On - Off Switch Rear Panel Remote Volume Control: INPUT 3 - AUX 1 Input Volume MOH Source Selecti: AUX 1 and AUX 2 Zone 2 Source Select: AUX 1 and AUX 2 VOX BUSS: Available on all Inputs by internal Jumper MUTE BUSS: Available on all Inputs by internal Jumper MUTE DELAY: Adjustable from 3 Sec to 60 Sec (rear panel control) Direct Muting: M1, M2 External Contact Closure Unmuting: MUTES/UNMUTES MIC 1 only Power Supply Output: 24 V DC - 250 mA Regulated Rack Mounting: Optional 19 Rack Kit Internal Cooling Fan: Thermally Controlled Protection: Power Surge, Overload and Thermal Protection Power Requirement: 117 Volt, 50-60 hZ Power Consumption: DMA3060 = 670VA - DMA3120 = 850VA Max. AC Accessory Outlet: 117 v - 500 W Max. Unswitched Terminations: Screw Terminals, RCA Jacks Housing Finish: Black Output Power Indicator: Multi-color LED Signal and Clip Dimensions: 10.75 W., 11 D., 4 H. with feet (274X280X102 mm) 3.5 H (89 mm) . less feet Net Weight: DMA3060 = 16 Lbs (7.3 Kg)Used but tested and functions normally. Sold as is. No returns

Manual®Series DMSO O M M 1 1 6 6 4 4Power AmplifiersPROFESSIONAL AUDIO & SOUNDTMInstallation ManualDIGITAL MUSIC SERIESand Operating InstructionsTMDIGITAL MUSIC SERIES4 Channel - 3 Zone - Dual VOX -MOH - Vox Relay - Module Port

Manual®Series DMSO O M M 1 1 6 6 4 4Power AmplifiersPROFESSIONAL AUDIO & SOUNDTMInstallation ManualDIGITAL MUSIC SERIESand Operating InstructionsTMDIGITAL MUSIC SERIES4 Channel - 3 Zone - Dual VOX -MOH - Vox Relay - Module Port

The PASO DMA2060 Paging Amplifier is a 60 Watt, four zone amplifier with four channel inputs and two zone outputs.Wide frequency response - very low distortion4 channel inputs, 2 zone outputsUp to 3 balanced microphone inputsPhantom power on all mic inputsMic 2/Aux 1 and mic 3/Aux 2 inputs with stereo summingAux1 and Aux2 inputs attenuator600 ohm transformer balanced - telephone paging inputMix buss and 600 ohm line outputIndependent input controlsAux1 remote volume controlsExternal EQ LinkTone by-pass and EQ Link switchesAddressable VOX buss - voice activated mutingVOX variable time delay functionAddressable mute bussDirect muting and unmuting600 ohm and 8 ohm 2 Watt max music on hold amplifierMOH amplifier source selectorZone 2, 2 Watt - 8 ohm output with separate control24 VDC 250 mA regulated power supply output8 ohm, 25 Volt & 70 Volt outputOptional 19 rack mounting with kit - 2-unit of vertical rack spaceUL 6500 listed

Hi. This was used as a phone/paging/background music amp in my store. It’s now for sale and works perfectly. Has a little tape on it but will clean up easy if you wish. I clean and test the inside of these. Great shape and very versatile. Thanks and good luck.

This item is in new condition, but has been in storage for years. Comes with manual. See pictures for more detail.

this is brand new in box never used

Paso Sound Products DMA 3060 DESCRIPTION AND APPLICATIONS ? ? High Performance - High Reliability Design ? ? Wide Frequency Response - Very Low Distortion ? ? 5 Channel Inputs - 2 Zone Outputs ? ? Up to 3 Balanced Microphone Inputs ? ? Phantom Power on all MIC Inputs ? ? MIC 2/AUX 1 and MIC 3/AUX 2 Inputs With Stereo Summing ? ? AUX1 and AUX2 Inputs Attenuator ? ? 600 ohm Transformer Balanced Telephone Paging Input ? ? MIX Buss and 600 ohm Line Output ? ? Independent Input Controls ? ? AUX1 Remote Volume Controls ? ? External EQ Link ? ? Tone by-pass and EQ Link switches ? ? Addressable VOX Buss Voice Activated Muting ? ? VOX Variable Time Delay Function ? ? Addressable MUTE Buss ? ? Direct Muting and Unmuting ? ? 600 ohm and 8 ohm 2 Watt Max. Music on Hold Amplifier ? ? MOH Amplifier Source Selector ? ? Zone 2, 2 Watt - 8 ohm Output with Separate Control ? ? 24 V DC 250 mA Regulated Power Supply Output ? ? 8 ohm, 25 Volt & 70 Volt Output ? ? Optional 19 Rack Mounting with Kit ? ? Low profile - 2-Unit of Vertical Rack space ? ? UL 6500 Listed (US - CANADA) SPECIFICATIONS POWER OUTPUT: DMA3060 DMA3120 Distortion: 0.01% THD at 1 kHz rated power Frequency Response: 20 hz - 30 Khz ± 2 dB Inputs: Input 1 MIC Electronically Balanced, Transformer Balanced with MT250 (optional) Input 2 Telephone Transformer Balanced Input 3 MIC Electronically Balanced - AUX 1 (Stereo Sum.) Input 4 MIC Electronically Balanced - AUX 2 (Stereo Sum.) Input 5 Module Port Sensitivity & Z: Input 1 Mic 1 = 1.5 Mv - 250 ohm Input 2 Tel =100 Mv - 600 ohm - Transformer Balanced Input 3 Mic 3 = 1.5 Mv - 250 ohm - AUX 1 = 100 Mv - 47K ohm Input 4 Mic 4 = 1.5 Mv - 250 ohm - AUX 2 = 100 Mv - 47K ohm Input Attenuator: AUX 1 and AUX 2 Phantom Power: All Microphone Inputs by internal jumper (18 V) Mic -70 db, Aux -75 db 600 ohm Transformer balanced Hum & Noise: Telephone Paging Input: 600 ohm Transformer Balanced EQ LINK: Preamp. out, Power Amp in with EQ Link Switch Line Output: Line Out 600 ohm - 1.5 V loaded Inputs/Outputs: MIX BUSS Zone 1 Output: 2 Watt Max. - 8 ohm with Control Music on Hold Output: 600 ohm-1 Volt Transformer Balanced Zone 2 Output: 2 Watt Max. - 8 ohm with Control Main Output Impedance: 8 ohm, 25 Volt and 70 Volt line Controls: Front Panel: Input 1 Volume, Input 2 Volume, Input 3 Volume, Input 4 Volume, Module Volume, Bass and Treble Rear Panel: AUX 1 Attenuator - AUX 2 Attenuator, VOX1 Sensitivity, VOX2 Sensitivity, MOH/ZONE 1 Level Control - ZONE 2 Level Control - VOX Sensitivity - MUTE Delay Tone Controls: Bass and Treble ± 10 dB at 100 hZ and 10 KHz Tone By-Pass: On - Off Switch Rear Panel Remote Volume Control: INPUT 3 - AUX 1 Input Volume MOH Source Selecti: AUX 1 and AUX 2 Zone 2 Source Select: AUX 1 and AUX 2 VOX BUSS: Available on all Inputs by internal Jumper MUTE BUSS: Available on all Inputs by internal Jumper MUTE DELAY: Adjustable from 3 Sec to 60 Sec (rear panel control) Direct Muting: M1, M2 External Contact Closure Unmuting: MUTES/UNMUTES MIC 1 only Power Supply Output: 24 V DC - 250 mA Regulated Rack Mounting: Optional 19 Rack Kit Internal Cooling Fan: Thermally Controlled Protection: Power Surge, Overload and Thermal Protection Power Requirement: 117 Volt, 50-60 hZ Power Consumption: DMA3060 = 670VA - DMA3120 = 850VA Max. AC Accessory Outlet: 117 v - 500 W Max. Unswitched Terminations: Screw Terminals, RCA Jacks Housing Finish: Black Output Power Indicator: Multi-color LED Signal and Clip Dimensions: 10.75 W., 11 D., 4 H. with feet (274X280X102 mm) 3.5 H (89 mm) . less feet Net Weight: DMA3060 = 16 Lbs (7.3 Kg)Used but tested and functions normally. Sold as is. No returns

The PASO DMA2060 Paging Amplifier is a 60 Watt, four zone amplifier with four channel inputs and two zone outputs.Wide frequency response - very low distortion4 channel inputs, 2 zone outputsUp to 3 balanced microphone inputsPhantom power on all mic inputsMic 2/Aux 1 and mic 3/Aux 2 inputs with stereo summingAux1 and Aux2 inputs attenuator600 ohm transformer balanced - telephone paging inputMix buss and 600 ohm line outputIndependent input controlsAux1 remote volume controlsExternal EQ LinkTone by-pass and EQ Link switchesAddressable VOX buss - voice activated mutingVOX variable time delay functionAddressable mute bussDirect muting and unmuting600 ohm and 8 ohm 2 Watt max music on hold amplifierMOH amplifier source selectorZone 2, 2 Watt - 8 ohm output with separate control24 VDC 250 mA regulated power supply output8 ohm, 25 Volt & 70 Volt outputOptional 19 rack mounting with kit - 2-unit of vertical rack spaceUL 6500 listed

Paso T2040 Solid State AmplifierThe device is used but functional.It requires thorough cleaning as it has not been used for some time.Paso T2040 Solid State AmplifierThis tool is used but fully functional for use.Deep cleaning is needed, is not used for long time.Paso T2040 Solid State Amplifier The device is used but functional. It requires thorough cleaning as it has not been used for some time. Paso T2040 Solid State Amplifier This tool is used but fully functional for use. Deep cleaning is needed, is not used for long time.

Do yourself a favor and READ THISWe are a recycling facility trying to rehome cool electronics. We are not a refurbisher. We are not a computer and electronics repair company.Honestly, we aren’t even IT professionals. We want to save these items because they are cool and worth something to someone. Let’s all be respectful of each others time and set expectations upfront. We sell EVERYTHING AS-IS.We dont test every little thing. It could very well work great, but we HAVE TO sell as Parts & Repair to protect ourselves from scammers and nitpickers.Most of the time, we only test for POWER. If things do get tested, it’s only for the basics. We state only what we think we know. Drop shippers should not use us. Computers, Servers, RAM, CPUs & Apple devices get the highest level of testing. Purchase knowing the reality of what you are buying. The items were recycled for a reason. There are no returns for our items unless stated otherwise. If we sell something NEW (unused) in sealed packaging… we assume it works. If it doesn’t, then YES - we will happily take the return/ refund your money and offer you a discount on your next order. What we know about the item (which is very little since we don’t have origin stories for them) is written on the SPEC SHEET. If you want full specs, use Google to find all the full details. You can get really good deals here if you do some research.a Sometimes, typos and errors occur. Let’s all be cool and work it out via chat before going ALL CAPS boomer on us. We want you to be happy with the deal, so let’s communicate. We don’t set shipping prices! In fact, we try and lessen the actual weight so you get a better deal. If it’s too expensive, don’t buy it or leave negative feedback because it’s 100% out of our control. We pack things up the best we can, but delivery companies don’t care. If things arrive damaged, lets work it out. **IF BUYING A LAPTOP** INTERNATIONAL BUYERS International laptop shipments will NOT include Lithium-Ion Laptop batteries. By purchasing laptops from us, ALL International buyers understand that the laptop battery will be pulled, so shipping and customs won’t reject shipments. No partial refund will be applied for lack of battery. DO NOT BUY LAPTOPS FROM US IF YOU REQUIRE THE BATTERY TO BE INCLUDED. Old Laptops will need new batteries sooner rather than later if marked “working”. Chargers, Power Cords and Accessories DO NOT come with items unless specifically stated in the description. Thank you for checking out our listing, best wishes! And now… the ITEM DESCRIPTION Used. Vintage. Power cord attached. No other cords or accessories included. Great condition!

Paso Sound Products DMA 3060 DESCRIPTION AND APPLICATIONS ? ? High Performance - High Reliability Design ? ? Wide Frequency Response - Very Low Distortion ? ? 5 Channel Inputs - 2 Zone Outputs ? ? Up to 3 Balanced Microphone Inputs ? ? Phantom Power on all MIC Inputs ? ? MIC 2/AUX 1 and MIC 3/AUX 2 Inputs With Stereo Summing ? ? AUX1 and AUX2 Inputs Attenuator ? ? 600 ohm Transformer Balanced Telephone Paging Input ? ? MIX Buss and 600 ohm Line Output ? ? Independent Input Controls ? ? AUX1 Remote Volume Controls ? ? External EQ Link ? ? Tone by-pass and EQ Link switches ? ? Addressable VOX Buss Voice Activated Muting ? ? VOX Variable Time Delay Function ? ? Addressable MUTE Buss ? ? Direct Muting and Unmuting ? ? 600 ohm and 8 ohm 2 Watt Max. Music on Hold Amplifier ? ? MOH Amplifier Source Selector ? ? Zone 2, 2 Watt - 8 ohm Output with Separate Control ? ? 24 V DC 250 mA Regulated Power Supply Output ? ? 8 ohm, 25 Volt & 70 Volt Output ? ? Optional 19 Rack Mounting with Kit ? ? Low profile - 2-Unit of Vertical Rack space ? ? UL 6500 Listed (US - CANADA) SPECIFICATIONS POWER OUTPUT: DMA3060 DMA3120 Distortion: 0.01% THD at 1 kHz rated power Frequency Response: 20 hz - 30 Khz ± 2 dB Inputs: Input 1 MIC Electronically Balanced, Transformer Balanced with MT250 (optional) Input 2 Telephone Transformer Balanced Input 3 MIC Electronically Balanced - AUX 1 (Stereo Sum.) Input 4 MIC Electronically Balanced - AUX 2 (Stereo Sum.) Input 5 Module Port Sensitivity & Z: Input 1 Mic 1 = 1.5 Mv - 250 ohm Input 2 Tel =100 Mv - 600 ohm - Transformer Balanced Input 3 Mic 3 = 1.5 Mv - 250 ohm - AUX 1 = 100 Mv - 47K ohm Input 4 Mic 4 = 1.5 Mv - 250 ohm - AUX 2 = 100 Mv - 47K ohm Input Attenuator: AUX 1 and AUX 2 Phantom Power: All Microphone Inputs by internal jumper (18 V) Mic -70 db, Aux -75 db 600 ohm Transformer balanced Hum & Noise: Telephone Paging Input: 600 ohm Transformer Balanced EQ LINK: Preamp. out, Power Amp in with EQ Link Switch Line Output: Line Out 600 ohm - 1.5 V loaded Inputs/Outputs: MIX BUSS Zone 1 Output: 2 Watt Max. - 8 ohm with Control Music on Hold Output: 600 ohm-1 Volt Transformer Balanced Zone 2 Output: 2 Watt Max. - 8 ohm with Control Main Output Impedance: 8 ohm, 25 Volt and 70 Volt line Controls: Front Panel: Input 1 Volume, Input 2 Volume, Input 3 Volume, Input 4 Volume, Module Volume, Bass and Treble Rear Panel: AUX 1 Attenuator - AUX 2 Attenuator, VOX1 Sensitivity, VOX2 Sensitivity, MOH/ZONE 1 Level Control - ZONE 2 Level Control - VOX Sensitivity - MUTE Delay Tone Controls: Bass and Treble ± 10 dB at 100 hZ and 10 KHz Tone By-Pass: On - Off Switch Rear Panel Remote Volume Control: INPUT 3 - AUX 1 Input Volume MOH Source Selecti: AUX 1 and AUX 2 Zone 2 Source Select: AUX 1 and AUX 2 VOX BUSS: Available on all Inputs by internal Jumper MUTE BUSS: Available on all Inputs by internal Jumper MUTE DELAY: Adjustable from 3 Sec to 60 Sec (rear panel control) Direct Muting: M1, M2 External Contact Closure Unmuting: MUTES/UNMUTES MIC 1 only Power Supply Output: 24 V DC - 250 mA Regulated Rack Mounting: Optional 19 Rack Kit Internal Cooling Fan: Thermally Controlled Protection: Power Surge, Overload and Thermal Protection Power Requirement: 117 Volt, 50-60 hZ Power Consumption: DMA3060 = 670VA - DMA3120 = 850VA Max. AC Accessory Outlet: 117 v - 500 W Max. Unswitched Terminations: Screw Terminals, RCA Jacks Housing Finish: Black Output Power Indicator: Multi-color LED Signal and Clip Dimensions: 10.75 W., 11 D., 4 H. with feet (274X280X102 mm) 3.5 H (89 mm) . less feet Net Weight: DMA3060 = 16 Lbs (7.3 Kg)Used but tested and functions normally. Sold as is. No returns