Description of item?Powerful amplifier section that supports headphones that are difficult to drive due to fully balanced class A operation?Uses carefully selected pair-matched discrete components?Gain setting function compatible with a wide range of headphones?Equipped with Neutrik 4-pin XLR balanced headphone output terminal and 6.35mm standard stereo headphone output terminal.?Equipped with a USB audio interface circuit that supports asynchronous transmission?Equipped with ESS Technologys ES9018 reference DAC?Supports uncompressed PCM up to 384 kHz and DSD playback up to 11.2 MHz with USB input?Supports Bluetooth connection using aptX codec (technical standards compliance certificate obtained)?Equipped with a variety of digital input terminals including digital connection with iPod?RCA and balanced XLR line level ?Analog input/output terminals?Home theater bypass mode that can be seamlessly integrated into your home theater?Equipped with a 4.3-inch TFT liquid crystal display. A hassle-free user interface with minimal necessary operations?Dimensions (W x H x D) 254 x 80 x 333 mm?Mass 5.9 kg?Power supply AC 100V, 50/60 Hz automatic detection?Power consumption 70 W (operating), 0.5 W (standby)?The condition of the product is that there are no noticeable scratches or stains.Accessories include a high-quality remote control, BT antenna (long type), power cable + conversion plug.The amplifier section is a class A circuit and generates a lot of heat, so a handmade cooling fan is included as an extra.The USB input terminal seems a little loose to fit, but in actual use, there were no problems such as sharpness in the sound.For remote delivery areas, additional fees will be charged. Import duties,taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. -do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts. -US and International government regulations prohibit such behavior.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

DescriptionAll items are shown in the pictures. If you cannot tell from the pictures please contact us. Due to differences in region codes some games CDs DVDs etc. may not ?be available. The voltage of some electrical products may be different. Please make sure to check before purchasing. PaymentPlease pay within 2 days of winning the auction. Shipping There have been delays in delivery due to the global pandemic. There may be a significant delay in the scheduled delivery date. Delivery Time Economy delivery? 3 to 4 weeks (Tracking numbers are not reflected in Australia Canada and some regions.) Standard delivery 2 to 3 weeks Terms of Sale If payment is not confirmed within 2 days of purchase the order will be cancelled. Returns are accepted within 60 days.International Buyers - Please Note: Import duties and taxes are not included in the item price or shipping cost. Please check with your countrys customs office for additional costs before bidding or purchasing. Duties and taxes are not collected by the shipping company. Please check with your countrys customs office for additional costs before bidding or purchasing. The act of declaring goods at a lower value or declaring goods as gifts is prohibited by international governments.

OPPO HA-1 Reference Balanced Hi-Res Headphone Amp / Dac / Pre-amp - 3x MINT Absolute MINT condition high-end headphone amplifier for high-end headphones. I babied this piece of gear and its physically and operationally flawless. Comes with all of the original equipment including antennae, manual, power cable, remote, and 1/4 adapter, all in its original box. This is an audiophile level product for very discerning people. At the time I bought it, it was the best you could get and its held its own in the years since. Im a professional audio producer and I believe it to be one of the very best headphone amplifiers Ive ever encountered. Thats why I bought one. Im selling it because Im downsizing but I will miss this one. It is truly a stellar piece of gear. It still has plastic on the front and does not have a lot of hours on it at all. These are very rare as most of these ended up in Japan and this is one made for the USA and has a plug for USA Outlets. Features: • Class A Headphone amp and Pre-Amp: Fully balanced analog inputs and outputs, purely analog volume control, and an adjustable headphone gain switch. • Toroidal Power supply: A custom OPPO transformer provides clean power with plenty of energy reserves. • Mobile Device Support: Bluetooth with Apt-X codec for high quality wireless audio and a USB input for mobile players and tablets. • ESS 9018 Sabre Reference DAC: High resolution performance with extremely low noise and distortion. • High Definition Audio Support: Numerous digital inputs including coaxial, optical, AES/EBU, and an asynchronous USB DAC input that supports PCM, DSD64, and DSD128. • Display Driven Interface: Physical volume and source selection knobs frame a 4.3-inch display for easy operation. HIGH PERFORMANCE AUDIODiscrete Class A AmplifierA Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1s power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1.Toroidal Power SupplyA toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1s toroidal linear power supply provides a very clean and robust power source to the audio components. Fully Balanced DesignThe internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path.ESS Sabre32 Reference DACThe DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper.OPPO HA-1 4.3 information display Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level.Made for iPod®, iPhone® and iPad®The HA-1 passes Apples MFi certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best.Wireless Audio via BluetoothThe HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free wirelessly from your mobile phone.Asynchronous USB DACBy bypassing the low fidelity, poor quality DAC of traditional computer soundcards, the HA-1 turns any computer into a high performance multi-media source by converting digital audio to analog through the ESS Sabre32 Reference DAC. The asynchronous transfer mode uses the high precision clock inside the HA-1 to drive the audio signal, not relying on the clock quality of the computer. HA-1s USB DAC input supports PCM up to 384 kHz 24-bit and DSD up to 12 MHz (DSD256).Adjustable Gain SettingThe headphone power amplifier has an adjustable gain setting. For optimal sound quality and to best match your headphones sensitivity, you can choose between Normal and High for the Headphone Gain setting.Build QualityThe HA-1 is housed in a brushed aluminum chassis. The Class A amplifier naturally consumes more power and generate more heat than other types of amplifiers, so the HA-1 is designed with ample ventilation and built with the finest components to ensure long term stability and performance. Tipping the scale at 13 lbs, the HA-1 is a solidly built desktop headphone amplifier. Stereo Pre-Amplifier with Home Theater BypassThe HA-1 doubles as a high fidelity stereo pre-amplifier with both RCA and XLR output ports. A special Home Theater Bypass mode can be assigned to any input source, making it very easy to integrate the HA-1 as a stereo pre-amplifier into a home theater sound system.Trigger Input & OutputThe HA-1 features 12V trigger input and output. When used as a stereo pre-amplifier, the trigger output can turn on your power amplifiers automatically when the HA-1 is turned on. You can also turn on the HA-1 automatically by connecting its trigger input to the trigger output of a source device or a surround sound processor.Remote Control & AppThe HA-1 comes with a remote control that provides volume control, direct source selection and even playback control for digital audio sources. A remote control app is available for both Apples iPhone and Android-based smartphones. The app works over Bluetooth and offers the same functionality as the physical remote control.SPECIFICATIONSDesigns and specifications are subject to change without notice. GeneralDimensions (W x H x D)10.0 x 3.6 x 13.1 inches, 254 x 91 x 333 mmMass13.0 lbs, 5.9 kgPower SupplyAC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensingPower Consumption70 W (operation), 0.5 W (standby)Trigger Input3.5 V – 15 V, 10mA minimumTrigger Output12 V, 100 mA maximumOperating Temperature41 °F - 95 °F, 5 °C - 35 °COperating Humidity15% - 75% No condensationRecommended Headphone Impedance32 ohm – 600 ohmBalanced Headphone Jack Output (XLR-4) Pin order1: L+, 2: L-, 3: R+, 4: R-, Shell: GND6.35 mm Headphone Jack Output Pin orderTip: L, Ring: R, Sleeve: GNDXLR Balanced Audio InputInput Impedance15k ohmMaximum Input Level18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms)RCA Stereo Audio InputInput Impedance10k ohmMaximum Input Level9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms)Coaxial, Optical, AES/EBU Digital InputsInput FormatStereo PCMSampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHzWord Length16-bit, 24-bitUSB DAC Audio Input (USB B Type)Input FormatStereo PCM, Stereo DSD (DoP v1.1 or native)PCM Sampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz, 352.8 kHz, 384 kHzPCM Word Length16-bit, 24-bit, 32-bitDSD Sampling Frequencies2.8224 MHz (DSD64), 5.6448 MHz (DSD128),11.2896 MHz (DSD256, native mode only)ProfileUSB 2.0, USB Audio 2.0Mobile USB Audio Input (USB A Type)Input FormatStereo PCMPCM Sampling Frequencies44.1 kHz, 48 kHzProfileUSB 2.0, USB Audio 2.0VBUS Power Output+5 V, 2.1 ABluetooth Audio InputStandardBluetooth 2.1+EDRProfileiAP, SPP, AVRCP, A2DPAudio Transmission FormatSBC, aptXDAC Performance SpecificationsSpecificationXLR OutputRCA OutputOutput Level4.6 ± 0.3 Vrms2.3 ± 0.3 VrmsFrequency Response(Tested with -10 dBFS / 384 kHz)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00056% (< -105 dB)Channel Separation> 105 dB> 105 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dBDynamic Range(1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dB(Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.)Pre-amplifier Performance SpecificationsSpecificationXLR Input – XLR OutputRCA Input – RCA OutputRated Output Level4.6 Vrms2.3 VrmsFrequency Response10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00071% (< -103 dB)Channel Separation> 120 dB> 110 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 110 dB> 105 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBMaximum Gain (100 mVrms input)6 dB6 dB(Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.)Headphone Amplifier Performance SpecificationsSpecificationConditionXLR Input - Balanced OutputRCA Input - 6.35 mm OutputMaximum Output Power (Per Channel)Into 600 Ohm2400 mW600 mWInto 32 Ohm3000 mW3500 mWRated Output Power(Per Channel)Into 600 Ohm800 mW200 mWInto 32 Ohm2000 mW500 mWFrequency Response10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1k Hz(A Weight, 20 Hz – 20 kHz)Rated Power< 0.0018% (< -95 dB)< 0.0056% (< -85 dB)50 mW< 0.001% (< -100 dB)< 0.0022% (< -93dB)Channel Separation> 120 dB> 90 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 111 dB> 111 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBOutput Impedance0.5 Ohm0.7 Ohm(Test condition: Volume knob at Max position and an input signal to drive the output with 600 Ohm loads to the rated output power, unless otherwise noted.)Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod® , iPhone®, or iPad®, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.iPad, iPhone, iPod and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries.Compatible iPod/iPhone/iPad Models- USB works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, iPod touch (5th generation).- Bluetooth technology works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, and iPod touch (5th generation).All trademarks are the property of their respective owners.

OPPO HA-1 Class-A Balanced Headphone Amp In excellent condition original packaging.

OPPO HA-1 Reference Balanced Hi-Res Headphone Amp / Dac / Pre-amp - 3x MINT Absolute MINT condition high-end headphone amplifier for high-end headphones. I babied this piece of gear and its physically and operationally flawless. Comes with all of the original equipment including antennae, manual, power cable, remote, and 1/4 adapter, all in its original box. This is an audiophile level product for very discerning people. At the time I bought it, it was the best you could get and its held its own in the years since. Im a professional audio producer and I believe it to be one of the very best headphone amplifiers Ive ever encountered. Thats why I bought one. Im selling it because Im downsizing but I will miss this one. It is truly a stellar piece of gear. It still has plastic on the front and does not have a lot of hours on it at all. These are very rare as most of these ended up in Japan and this is one made for the USA and has a plug for USA Outlets. Features: • Class A Headphone amp and Pre-Amp: Fully balanced analog inputs and outputs, purely analog volume control, and an adjustable headphone gain switch. • Toroidal Power supply: A custom OPPO transformer provides clean power with plenty of energy reserves. • Mobile Device Support: Bluetooth with Apt-X codec for high quality wireless audio and a USB input for mobile players and tablets. • ESS 9018 Sabre Reference DAC: High resolution performance with extremely low noise and distortion. • High Definition Audio Support: Numerous digital inputs including coaxial, optical, AES/EBU, and an asynchronous USB DAC input that supports PCM, DSD64, and DSD128. • Display Driven Interface: Physical volume and source selection knobs frame a 4.3-inch display for easy operation. HIGH PERFORMANCE AUDIODiscrete Class A AmplifierA Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1s power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1.Toroidal Power SupplyA toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1s toroidal linear power supply provides a very clean and robust power source to the audio components. Fully Balanced DesignThe internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path.ESS Sabre32 Reference DACThe DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper.OPPO HA-1 4.3 information display Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level.Made for iPod®, iPhone® and iPad®The HA-1 passes Apples MFi certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best.Wireless Audio via BluetoothThe HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free wirelessly from your mobile phone.Asynchronous USB DACBy bypassing the low fidelity, poor quality DAC of traditional computer soundcards, the HA-1 turns any computer into a high performance multi-media source by converting digital audio to analog through the ESS Sabre32 Reference DAC. The asynchronous transfer mode uses the high precision clock inside the HA-1 to drive the audio signal, not relying on the clock quality of the computer. HA-1s USB DAC input supports PCM up to 384 kHz 24-bit and DSD up to 12 MHz (DSD256).Adjustable Gain SettingThe headphone power amplifier has an adjustable gain setting. For optimal sound quality and to best match your headphones sensitivity, you can choose between Normal and High for the Headphone Gain setting.Build QualityThe HA-1 is housed in a brushed aluminum chassis. The Class A amplifier naturally consumes more power and generate more heat than other types of amplifiers, so the HA-1 is designed with ample ventilation and built with the finest components to ensure long term stability and performance. Tipping the scale at 13 lbs, the HA-1 is a solidly built desktop headphone amplifier. Stereo Pre-Amplifier with Home Theater BypassThe HA-1 doubles as a high fidelity stereo pre-amplifier with both RCA and XLR output ports. A special Home Theater Bypass mode can be assigned to any input source, making it very easy to integrate the HA-1 as a stereo pre-amplifier into a home theater sound system.Trigger Input & OutputThe HA-1 features 12V trigger input and output. When used as a stereo pre-amplifier, the trigger output can turn on your power amplifiers automatically when the HA-1 is turned on. You can also turn on the HA-1 automatically by connecting its trigger input to the trigger output of a source device or a surround sound processor.Remote Control & AppThe HA-1 comes with a remote control that provides volume control, direct source selection and even playback control for digital audio sources. A remote control app is available for both Apples iPhone and Android-based smartphones. The app works over Bluetooth and offers the same functionality as the physical remote control.SPECIFICATIONSDesigns and specifications are subject to change without notice. GeneralDimensions (W x H x D)10.0 x 3.6 x 13.1 inches, 254 x 91 x 333 mmMass13.0 lbs, 5.9 kgPower SupplyAC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensingPower Consumption70 W (operation), 0.5 W (standby)Trigger Input3.5 V – 15 V, 10mA minimumTrigger Output12 V, 100 mA maximumOperating Temperature41 °F - 95 °F, 5 °C - 35 °COperating Humidity15% - 75% No condensationRecommended Headphone Impedance32 ohm – 600 ohmBalanced Headphone Jack Output (XLR-4) Pin order1: L+, 2: L-, 3: R+, 4: R-, Shell: GND6.35 mm Headphone Jack Output Pin orderTip: L, Ring: R, Sleeve: GNDXLR Balanced Audio InputInput Impedance15k ohmMaximum Input Level18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms)RCA Stereo Audio InputInput Impedance10k ohmMaximum Input Level9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms)Coaxial, Optical, AES/EBU Digital InputsInput FormatStereo PCMSampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHzWord Length16-bit, 24-bitUSB DAC Audio Input (USB B Type)Input FormatStereo PCM, Stereo DSD (DoP v1.1 or native)PCM Sampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz, 352.8 kHz, 384 kHzPCM Word Length16-bit, 24-bit, 32-bitDSD Sampling Frequencies2.8224 MHz (DSD64), 5.6448 MHz (DSD128),11.2896 MHz (DSD256, native mode only)ProfileUSB 2.0, USB Audio 2.0Mobile USB Audio Input (USB A Type)Input FormatStereo PCMPCM Sampling Frequencies44.1 kHz, 48 kHzProfileUSB 2.0, USB Audio 2.0VBUS Power Output+5 V, 2.1 ABluetooth Audio InputStandardBluetooth 2.1+EDRProfileiAP, SPP, AVRCP, A2DPAudio Transmission FormatSBC, aptXDAC Performance SpecificationsSpecificationXLR OutputRCA OutputOutput Level4.6 ± 0.3 Vrms2.3 ± 0.3 VrmsFrequency Response(Tested with -10 dBFS / 384 kHz)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00056% (< -105 dB)Channel Separation> 105 dB> 105 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dBDynamic Range(1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dB(Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.)Pre-amplifier Performance SpecificationsSpecificationXLR Input – XLR OutputRCA Input – RCA OutputRated Output Level4.6 Vrms2.3 VrmsFrequency Response10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00071% (< -103 dB)Channel Separation> 120 dB> 110 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 110 dB> 105 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBMaximum Gain (100 mVrms input)6 dB6 dB(Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.)Headphone Amplifier Performance SpecificationsSpecificationConditionXLR Input - Balanced OutputRCA Input - 6.35 mm OutputMaximum Output Power (Per Channel)Into 600 Ohm2400 mW600 mWInto 32 Ohm3000 mW3500 mWRated Output Power(Per Channel)Into 600 Ohm800 mW200 mWInto 32 Ohm2000 mW500 mWFrequency Response10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1k Hz(A Weight, 20 Hz – 20 kHz)Rated Power< 0.0018% (< -95 dB)< 0.0056% (< -85 dB)50 mW< 0.001% (< -100 dB)< 0.0022% (< -93dB)Channel Separation> 120 dB> 90 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 111 dB> 111 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBOutput Impedance0.5 Ohm0.7 Ohm(Test condition: Volume knob at Max position and an input signal to drive the output with 600 Ohm loads to the rated output power, unless otherwise noted.)Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod® , iPhone®, or iPad®, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.iPad, iPhone, iPod and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries.Compatible iPod/iPhone/iPad Models- USB works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, iPod touch (5th generation).- Bluetooth technology works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, and iPod touch (5th generation).All trademarks are the property of their respective owners.

Edwards Home Entertainment and Design, an appointed and displaying dealer for McIntosh, Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Soul Note, Gold Note, Marantz, Rose HiFi, AudioQuest, Nordost, as well as part of the Verified Premier Dealer Program on AudioGon, is offering for the Oppo HA-1.This HA-1 is super clean, without issues and is complete with its factory packaging and box!! Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997 and is now an authorized dealer for McIntosh (displaying C2700, C22, C12000, MC462, MC275vi, MC1.25s, MEN220, MT-10, MT-5, MA12000, MA352, MA252, MPC500, MPC1500, MHA200, speakers and interconnect cabling), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S3), Focal (displaying Scala EVO, Sopra3, Sopra2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5s2, S5, X3s2), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Fyne Audio (displaying F1-12, F1-8, 502SP, F700), HiFiROSE (displaying the RS150, RS250 and RS520), Parasound (displaying JC-1+, JC2BP, JC-5, JC-3+, and HINT6), Jeff Wells Audio (displaying Commander II and Innamorata II), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812, S/512, and T9/x), Perlisten (displaying the S7t and D212), JL Audio (displaying the G213v2, F113v2, D and E subs), Soul Note (displaying the A2 integrated), Nordost (displaying Norse and Leif series, with demo cases for in home trials), AudioQuest (displaying all power centers, 7000, 5000, 3000, Thunderbird, Black Beauty, Pegasus cabling), SolidSteel (displaying HyperSpike stands and amp stands), NEO Luxury Audio Racks (displaying the Quattron), Bossocontinuo (displaying the McRack) Reference. Visit the EHEADAudio com site in South San Francisco, CA for direct phone (begins with 925) / voice / text support. We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work!

OPPO HA-1 Class-A Balanced Headphone Amp In excellent condition original packaging.

OPPO HA-1 Class-A Balanced Headphone Amp In excellent condition original packaging.

Edwards Home Entertainment and Design, an appointed and displaying dealer for McIntosh, Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Soul Note, Gold Note, Marantz, Rose HiFi, AudioQuest, Nordost, as well as part of the Verified Premier Dealer Program on AudioGon, is offering for the Oppo HA-1.This HA-1 is super clean, without issues and is complete with its factory packaging and box!! Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997 and is now an authorized dealer for McIntosh (displaying C2700, C22, C12000, MC462, MC275vi, MC1.25s, MEN220, MT-10, MT-5, MA12000, MA352, MA252, MPC500, MPC1500, MHA200, speakers and interconnect cabling), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S3), Focal (displaying Scala EVO, Sopra3, Sopra2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5s2, S5, X3s2), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Fyne Audio (displaying F1-12, F1-8, 502SP, F700), HiFiROSE (displaying the RS150, RS250 and RS520), Parasound (displaying JC-1+, JC2BP, JC-5, JC-3+, and HINT6), Jeff Wells Audio (displaying Commander II and Innamorata II), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812, S/512, and T9/x), Perlisten (displaying the S7t and D212), JL Audio (displaying the G213v2, F113v2, D and E subs), Soul Note (displaying the A2 integrated), Nordost (displaying Norse and Leif series, with demo cases for in home trials), AudioQuest (displaying all power centers, 7000, 5000, 3000, Thunderbird, Black Beauty, Pegasus cabling), SolidSteel (displaying HyperSpike stands and amp stands), NEO Luxury Audio Racks (displaying the Quattron), Bossocontinuo (displaying the McRack) Reference. Visit the EHEADAudio com site in South San Francisco, CA for direct phone (begins with 925) / voice / text support. We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work!

BeschreibungZustand: Gebraucht Es ist zwar schon eine Weile her, dass es herauskam, aber es funktioniert immer noch und erzeugt einen guten Klang. Zum Zubehör gehören eine hochwertige Fernbedienung, eine BT-Antenne (lange Ausführung), ein Stromkabel und ein Konvertierungsstecker. Der Verstärkerabschnitt ist ein Schaltkreis der Klasse A und erzeugt viel Wärme, daher ist ein handgefertigter Kühlventilator als Extra enthalten. (Ich habe ein 100-Yen-Gelblatt verwendet, das ich zur Kühlung auf ein Stanzmetall gelegt habe.) Der USB-Eingangsanschluss scheint etwas locker zu sitzen, bei der tatsächlichen Verwendung gab es jedoch keine Probleme wie etwa Schärfe im Klang. Bei diesem Produkt handelt es sich um ein in Japan verkauftes Originalprodukt. Seien Sie versichert, dass wir jeden Artikel sorgfältig verpacken und nicht beschädigen. Versand Wir versenden das Produkt sorgfältig verpackt. Nach Bestätigung Ihrer Zahlung versenden wir diesen Artikel innerhalb 5 Werktage. (außer Samstag, Sonntag und Nationalfeiertagen in JAPAN) An Wochenenden ist keine Verfügbarkeit gegeben, da FedEx oder DHL geschlossen sind. Kehrt zurück Wir akzeptieren Rücksendungen bis zu 60 Tage nachdem der Artikel eingetroffen ist. Sollten Sie ein defektes Produkt erhalten, nehmen Sie bitte Kontakt mit uns auf. Die Kosten der Rücksendung tragen wir. Bitte kaufen Sie mit Vertrauen. Über uns Vielen Dank, dass Sie unsere Seite besucht haben. Wenn auf dieser Seite ein Punkt unklar ist, können Sie gerne nachfragen. Wir beantworten sie herzlich. Internationale Käufer - Bitte beachten Sie:Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren gehen zu Lasten des Käufers. Bitte erkundigen Sie sich beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sind, bevor Sie ein Gebot abgeben oder einen Kauf tätigen. Danke für Ihr Verständnis.

Description I put a protective film on the display and used a cooling fan at the same time, so I think the internal condition is good. All accessories are included, including the original box, and although there are some minor scratches, there is no problem with operation. It will be shipped in the original box. 100 % Authentic or Money Back Guaranteed(Do not worry you are protected by eBay and Paypal Buyer Protection) See the pictures for more details. If you have any question about the condition, accessories, or anything about the product, Please feel free to message us. We are glad to answer all your concerns. PaymentWe accept PayPal only. _If we cannot confirm a payment within 3 days nor get any message, we might report the buyer and cancel the deal.If you are planning to be in the situation with no internet, please let us know. CautionsShipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship to. Returns~Unconditional Return Policy~ Customer service and satisfaction are very important to us. I have an unconditional return policy. Please contact us first for return before you ship it back to me. (We can accept returns even after breaking the gift wrapping or packages) Return is allowed when the condition does not match with description. All returned items must be the original condition. Please keep in your mind that we take pictures of all the items details to avoid any problem. If you ask for a refund or return, we might ask you to take a picture of the item to make sure it matches our record. International BuyersPlease Note : Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Edwards Home Entertainment and Design, an appointed and displaying dealer for McIntosh, Bowers & Wilkins, Focal, NAIM, Parasound, Classe Audio, Rotel and Michi, Fyne Audio, Rel Acoustics, JL Audio, Perlisten, Soul Note, Gold Note, Marantz, Rose HiFi, AudioQuest, Nordost, as well as part of the Verified Premier Dealer Program on AudioGon, is offering for the Oppo HA-1.This HA-1 is super clean, without issues and is complete with its factory packaging and box!! Buy / Sell / Trade / Consign - Edwards Home Entertainment and Design (EHEAD) has been a premier seller of carefully selected, pre-loved high end audio equipment since 1997 and is now an authorized dealer for McIntosh (displaying C2700, C22, C12000, MC462, MC275vi, MC1.25s, MEN220, MT-10, MT-5, MA12000, MA352, MA252, MPC500, MPC1500, MHA200, speakers and interconnect cabling), Bowers & Wilkins (displaying 801D4, 802D4, 803D4, 804D4, 805D4, 702S3), Focal (displaying Scala EVO, Sopra3, Sopra2), NAIM (displaying the SuperNAIT3), Rotel Michi (displaying the P5s2, S5, X3s2), Classe Delta (displaying the Delta Pre, Delta Stereo, Delta Monos), Fyne Audio (displaying F1-12, F1-8, 502SP, F700), HiFiROSE (displaying the RS150, RS250 and RS520), Parasound (displaying JC-1+, JC2BP, JC-5, JC-3+, and HINT6), Jeff Wells Audio (displaying Commander II and Innamorata II), Marantz (displaying PM-10 Integrated, SA-10 Super Audio SACD/CD Player, TT-15S2 TurnTable), Rel Acoustics (displaying the Carbon Special, S/812, S/512, and T9/x), Perlisten (displaying the S7t and D212), JL Audio (displaying the G213v2, F113v2, D and E subs), Soul Note (displaying the A2 integrated), Nordost (displaying Norse and Leif series, with demo cases for in home trials), AudioQuest (displaying all power centers, 7000, 5000, 3000, Thunderbird, Black Beauty, Pegasus cabling), SolidSteel (displaying HyperSpike stands and amp stands), NEO Luxury Audio Racks (displaying the Quattron), Bossocontinuo (displaying the McRack) Reference. Visit the EHEADAudio com site in South San Francisco, CA for direct phone (begins with 925) / voice / text support. We are always looking to buy quality used gear. Despite listings that may indicate LOCAL PICK UP ONLY - this is just to facilitate posting of gear. Logistics is our specialty, we can facilitate packaging and shipping to and from anywhere in the country. If you are interested in our gear, please reach out and we can figure out a shipping solution that will work. Our shop is in South San Francisco - stop by and put your eyes and ears to work!

Absolute MINT condition high-end headphone amplifier for high-end headphones. I babied this piece of gear and its physically and operationally flawless. Comes with all of the original bits including antennae, manual, power cable, remote, and 1/4 adapter, all in its original box. This is an audiophile level product for very discerning people. At the time I bought it, it was the best you could get and its held its own in the years since. Im a professional audio producer and I believe it to be one of the very best headphone amplifiers Ive ever encountered. Thats why I bought one. Im selling it because Im downsizing but I will miss this one. It is truly a stellar piece of gear. Features: • Class A Headphone amp and Pre-Amp: Fully balanced analog inputs and outputs, purely analog volume control, and an adjustable headphone gain switch. • Toroidal Power supply: A custom OPPO transformer provides clean power with plenty of energy reserves. • Mobile Device Support: Bluetooth with Apt-X codec for high quality wireless audio and a USB input for mobile players and tablets. • ESS 9018 Sabre Reference DAC: High resolution performance with extremely low noise and distortion. • High Definition Audio Support: Numerous digital inputs including coaxial, optical, AES/EBU, and an asynchronuous USB DAC input that supports PCM, DSD64, and DSD128. • Display Driven Interface: Physical volume and source selection knobs frame a 4.3-inch display for easy operation.

OPPO HA-1 Reference Balanced Hi-Res Headphone Amp / Dac / Pre-amp - 3x MINT Absolute MINT condition high-end headphone amplifier for high-end headphones. I babied this piece of gear and its physically and operationally flawless. Comes with all of the original equipment including antennae, manual, power cable, remote, and 1/4 adapter, all in its original box. This is an audiophile level product for very discerning people. At the time I bought it, it was the best you could get and its held its own in the years since. Im a professional audio producer and I believe it to be one of the very best headphone amplifiers Ive ever encountered. Thats why I bought one. Im selling it because Im downsizing but I will miss this one. It is truly a stellar piece of gear. Features: • Class A Headphone amp and Pre-Amp: Fully balanced analog inputs and outputs, purely analog volume control, and an adjustable headphone gain switch. • Toroidal Power supply: A custom OPPO transformer provides clean power with plenty of energy reserves. • Mobile Device Support: Bluetooth with Apt-X codec for high quality wireless audio and a USB input for mobile players and tablets. • ESS 9018 Sabre Reference DAC: High resolution performance with extremely low noise and distortion. • High Definition Audio Support: Numerous digital inputs including coaxial, optical, AES/EBU, and an asynchronous USB DAC input that supports PCM, DSD64, and DSD128. • Display Driven Interface: Physical volume and source selection knobs frame a 4.3-inch display for easy operation. HIGH PERFORMANCE AUDIODiscrete Class A AmplifierA Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1s power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1.Toroidal Power SupplyA toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1s toroidal linear power supply provides a very clean and robust power source to the audio components. Fully Balanced DesignThe internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path.ESS Sabre32 Reference DACThe DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper.OPPO HA-1 4.3 information display Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level.Made for iPod®, iPhone® and iPad®The HA-1 passes Apples MFi certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best.Wireless Audio via BluetoothThe HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free wirelessly from your mobile phone.Asynchronous USB DACBy bypassing the low fidelity, poor quality DAC of traditional computer soundcards, the HA-1 turns any computer into a high performance multi-media source by converting digital audio to analog through the ESS Sabre32 Reference DAC. The asynchronous transfer mode uses the high precision clock inside the HA-1 to drive the audio signal, not relying on the clock quality of the computer. HA-1s USB DAC input supports PCM up to 384 kHz 24-bit and DSD up to 12 MHz (DSD256).Adjustable Gain SettingThe headphone power amplifier has an adjustable gain setting. For optimal sound quality and to best match your headphones sensitivity, you can choose between Normal and High for the Headphone Gain setting.Build QualityThe HA-1 is housed in a brushed aluminum chassis. The Class A amplifier naturally consumes more power and generate more heat than other types of amplifiers, so the HA-1 is designed with ample ventilation and built with the finest components to ensure long term stability and performance. Tipping the scale at 13 lbs, the HA-1 is a solidly built desktop headphone amplifier. Stereo Pre-Amplifier with Home Theater BypassThe HA-1 doubles as a high fidelity stereo pre-amplifier with both RCA and XLR output ports. A special Home Theater Bypass mode can be assigned to any input source, making it very easy to integrate the HA-1 as a stereo pre-amplifier into a home theater sound system.Trigger Input & OutputThe HA-1 features 12V trigger input and output. When used as a stereo pre-amplifier, the trigger output can turn on your power amplifiers automatically when the HA-1 is turned on. You can also turn on the HA-1 automatically by connecting its trigger input to the trigger output of a source device or a surround sound processor.Remote Control & AppThe HA-1 comes with a remote control that provides volume control, direct source selection and even playback control for digital audio sources. A remote control app is available for both Apples iPhone and Android-based smartphones. The app works over Bluetooth and offers the same functionality as the physical remote control.SPECIFICATIONSDesigns and specifications are subject to change without notice. GeneralDimensions (W x H x D)10.0 x 3.6 x 13.1 inches, 254 x 91 x 333 mmMass13.0 lbs, 5.9 kgPower SupplyAC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensingPower Consumption70 W (operation), 0.5 W (standby)Trigger Input3.5 V – 15 V, 10mA minimumTrigger Output12 V, 100 mA maximumOperating Temperature41 °F - 95 °F, 5 °C - 35 °COperating Humidity15% - 75% No condensationRecommended Headphone Impedance32 ohm – 600 ohmBalanced Headphone Jack Output (XLR-4) Pin order1: L+, 2: L-, 3: R+, 4: R-, Shell: GND6.35 mm Headphone Jack Output Pin orderTip: L, Ring: R, Sleeve: GNDXLR Balanced Audio InputInput Impedance15k ohmMaximum Input Level18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms)RCA Stereo Audio InputInput Impedance10k ohmMaximum Input Level9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms)Coaxial, Optical, AES/EBU Digital InputsInput FormatStereo PCMSampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHzWord Length16-bit, 24-bitUSB DAC Audio Input (USB B Type)Input FormatStereo PCM, Stereo DSD (DoP v1.1 or native)PCM Sampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,176.4 kHz, 192 kHz, 352.8 kHz, 384 kHzPCM Word Length16-bit, 24-bit, 32-bitDSD Sampling Frequencies2.8224 MHz (DSD64), 5.6448 MHz (DSD128),11.2896 MHz (DSD256, native mode only)ProfileUSB 2.0, USB Audio 2.0Mobile USB Audio Input (USB A Type)Input FormatStereo PCMPCM Sampling Frequencies44.1 kHz, 48 kHzProfileUSB 2.0, USB Audio 2.0VBUS Power Output+5 V, 2.1 ABluetooth Audio InputStandardBluetooth 2.1+EDRProfileiAP, SPP, AVRCP, A2DPAudio Transmission FormatSBC, aptXDAC Performance SpecificationsSpecificationXLR OutputRCA OutputOutput Level4.6 ± 0.3 Vrms2.3 ± 0.3 VrmsFrequency Response(Tested with -10 dBFS / 384 kHz)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)10 Hz – 170 kHz (+0/-3 dB)20 Hz – 20 kHz (+0/-0.07 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00056% (< -105 dB)Channel Separation> 105 dB> 105 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dBDynamic Range(1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz)> 115 dB> 113 dB(Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.)Pre-amplifier Performance SpecificationsSpecificationXLR Input – XLR OutputRCA Input – RCA OutputRated Output Level4.6 Vrms2.3 VrmsFrequency Response10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-2 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz)< 0.00056% (< -105 dB)< 0.00071% (< -103 dB)Channel Separation> 120 dB> 110 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 110 dB> 105 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBMaximum Gain (100 mVrms input)6 dB6 dB(Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.)Headphone Amplifier Performance SpecificationsSpecificationConditionXLR Input - Balanced OutputRCA Input - 6.35 mm OutputMaximum Output Power (Per Channel)Into 600 Ohm2400 mW600 mWInto 32 Ohm3000 mW3500 mWRated Output Power(Per Channel)Into 600 Ohm800 mW200 mWInto 32 Ohm2000 mW500 mWFrequency Response10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)10 Hz – 200 kHz (+0/-1 dB)20 Hz – 20 kHz (+0/-0.04 dB)THD+N at 1k Hz(A Weight, 20 Hz – 20 kHz)Rated Power< 0.0018% (< -95 dB)< 0.0056% (< -85 dB)50 mW< 0.001% (< -100 dB)< 0.0022% (< -93dB)Channel Separation> 120 dB> 90 dBSignal-to-Noise Ratio(A Weight, 20 Hz – 20 kHz)> 111 dB> 111 dBDynamic Range(1 kHz -60 dB, A Weight, 20 Hz – 20 kHz)> 120 dB> 115 dBOutput Impedance0.5 Ohm0.7 Ohm(Test condition: Volume knob at Max position and an input signal to drive the output with 600 Ohm loads to the rated output power, unless otherwise noted.)Made for iPod, Made for iPhone, and Made for iPad mean that an electronic accessory has been designed to connect specifically to iPod® , iPhone®, or iPad®, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.iPad, iPhone, iPod and iPod touch® are trademarks of Apple Inc., registered in the U.S. and other countries.Compatible iPod/iPhone/iPad Models- USB works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, iPod touch (5th generation).- Bluetooth technology works with iPhone 5S, iPhone 5C, iPhone 5, iPhone 4S, iPad (4th generation), iPad mini, and iPod touch (5th generation).All trademarks are the property of their respective owners.

Used Oppo HA-1 Headphone Amplifier DAC Silver - Excellent Condition Description Specifications Oppo HA-1 Limited Silver Edition Pure Class A headphone amplifier High resolution and depth for superior sound quality Easy setup with Mac Includes remote control Condition Excellent condition Protective film on display Cooling fan used simultaneously Internal state is good Volume knob has some dents and minor scratches All functions are working properly Shipping We ship using FedEx, DHL and Japan Post. About Importers Obligation Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.