Onkyo Integra P 306Rs Preamplifier With Operation Guarantee Control Amplifier
- Condition: Used
- Price: 466.12 EUR
- Status: sold
- Item number: 186248958205
- Seller: sa218132 (97|90.7%)
- Seller information: Commercial (with base shop)
- Item location: saitama
- Ships to: US
- Shipping: 0,0 EUR
- on EBAY
-
Description
Operation check ?The power supply was turned on.?Protector The protector was applied at first, but after a while, it was removed and OK.?Connection lamp (super servo cord connection check) was OK.?Super servo lamp was OK after the protector was released.?Volume volume, when the volume is gradually increased, the sound gradually increases from no sound to loud. It sounds clear and normal without any sound distortion, buzzing, or burring.??Balance volume, by turning it to the right gradually, the volume of L decreases gradually without changing the volume of R. By turning it to the left gradually, the volume of R decreases gradually without changing the volume of L. It sounds clear without any squeak, peel or burr, and it is normal.???Treble volume was normal, no noise.?Bass volume was normal, no noise.?Input selector switch and input terminalTape 2 > 1, Tape 1 > 2, Hono, CD, Tuner, No burrs. Normal.?Recording output selector switch and input and output terminalsTape 2 > 1, Tape 1 > 2, OFF, Honno, CD, Tuner, No debris was detected. Normal?Mode selector switch?REV L,R,?R,L, output in reverse stereo, normal, no buzzing?NORM L,R,?L,R, output in stereo, normal, no buzzing.?L+R LR -> output in composite, normal, no buzzing.?L L ? output in LR, normal, no buzzing.?R R ? output in LR, normal, no buzzing.?Subsonic filter switch?The output below 15Hz was normal and there was no buzzing.?The output below 20Hz was lowered, normal, no buzzing.?Cartridge switch?MIGH,MC There was no buzzing.?MM 100K,47K, no buzzing.?MC There was no buzzing.Checked only for noise check.?Phono switch and input terminal?PHONO-1/PHONO-2, normal, no galli.?Tuner/Auxiliary terminal selector switch and input terminal?TUNER/AUX, normal, no galli?Muting switch, 0dB and -20dB checked, OK.?Volume volume, balance volume, bass volume, and treble volume.Input switching range, recording output switching range, mode switching range, cartridge switching range, tuner/auxiliary terminal switching alternate switch The inside was disassembled, the contacts were cleaned, and strong contact revival medicine was applied.(See the 10th photo for details).??The DC balance is exactly within ±00.0mV to 02.5mV, so there should be no popping sound after the protection is released.(This is the case when there is no DC balance deviation from the input to the output terminal of the power amplifier.(See the 9th picture for details)Super servo lamp (new bulb) has been replaced.Other parts capacitors, transistors, resistors, and other parts are in good condition.?The inside has been lightly cleaned with a suction brush to remove dust.?This is a working item.?Accessories Instruction manual, (8-page photocopy)Super servo cord is not included.This is a used product and may have scratches, dents, and dings.???Reference Specifications??Onkyo Preamp P-306RSInput Sensitivity, Input Impedance?PHONO-MC 130?V(100?/220?)?PHONO-HIGH GAIN MC 2.5mV(100?)?PHONO-MM 2.5mV(47k?,100k?)?TUNER,AUX 150mV(47k?)?TAPE-PLAY 150mV(47k?)?Rated output voltage, output impedance?TAPE-REC 150mV(560?)?OUTPUT 1V max. 20V(220?)?PHONO maximum allowable input?MC(THD0.05% 1k/10kHz) 17mV/82mV?MM,HIGH MC(THD0.05? 1k/10kHz) 300mV/1400mV?Frequency Response?MC 4Hz to 150kHz(+0.2,-3dB)?MM 1.8Hz to 170kHz(+0.2,-3dB)?TUNER,AUX,TAPE 0.8Hz to 170kHz(+0,-3dB)?Total Harmonic Distortion(THD)?20Hz to 20kHz,VOL: -3dB Output voltage: 3V??MC 0.008% max.??MM 0.002% max.??TUNER,AUX,TAPE 0.0015% or less?Intermodulation distortion?0.003% or less (at rated output, SMPTE method (70Hz:7kHz=4:1))?S/N?IHF network input shunt??MC 69dB??MM 86dB??TUNER,AUX,TAPE 100dB?Tone Control?BASS ±8dBMAXat70Hz(VOL: -20dB)?TREBLE ±8dBMAXat20kHz(VOL: -20dB)?Filter Characteristics?HIGH CUT 7kHz 6dB/oct?SUBSNIC CUT 15Hz/20Hz 6dB/oct?Muting -20dB?Transient Killer Operation Time?POWER ON/OFF 7sec/100msec?Semiconductors used?8FET,49Tr,4IC,37Di?Power supply AC100V 50/60Hz?Power consumption 26W (Electrical Appliance and Material Control Law)? AC output POWER switch interlocked 2, non-interlocked 1 TOTAL1000W MAX?Dimensions?18.9W x 3.9H x 15.9Din?Weight?10.5kg Shipping from Japan with Tracking Number & Insurance. I promise fast shipping via FedEx or DHL as soon as possible! Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
Live search