cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

Bang Olufsen Beogram 2200 Plattenspieler mit MMC 20S Tonabnehmer. Plattenspieler funktioniert nicht! Die Abdeckung oben Ist gebrochen und hlt nicht mehr gut. Auerdem verkratzt. An den Seiten fehlen teilweise die Holzverkleidungen bzw. sind gebrochen. An Bastler abzugeben, die sich damit auskennen und den Plattenspieler reparieren knnen oder als Deko nutzen. Privatverkauf, keine Rcknahme.

cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

Bang & Olufsen Beocenter 4600 Wurde von unseren Techniker völlig überholt. Funktioniert einwandfrei.Optisch im Betracht des Alters in einem wunderbaren Zustand. Die MMC20S gehört zum Lieferumfang!!! Ein Jahr Gewährleistung. Für dazugehörende Lautsprechern sehen Sie sich bitte in unsere andere Auktionen die Beovox S60 oder S45.2 an. BeoCenter 4600 Product Specifications Type: 2631 (1977 - Dec 1980) Power output RMS DIN: 2 x 25 watts / 4 ohms 2 x 20 watts / 8 ohms Harmonic distortion < 0.1 % Intermodulation < 0.15 % Frequency range 20 - 30,000 Hz FM tuner range FM 87.5 - 108 MHz LW 150 - 350 kHz MW 520 - 1610 kHz Record-player: pickup MMC 20 S Recommended tracking force 15 mN / 1.5 g Speeds/control range 33 - 45 rpm / > +/- 3% Wow and flutter < +/- 0.09 % Rumble weighted > 62 dB Rumble unweighted > 42 dB Tape recorder: Wow and flutter: < +/- 0.2 % Speed deviation: > +/- 1 % Fast forward and rewind (C60) 85 sec

B&O BANG AND OLUFSEN BEOGRAM 1600 TURNTABLE WITH MMC 20S STYLUS - GOOD CONDITION Full working Good condition Free Uk Delivery

Bang Olufsen Beogram 2200 Plattenspieler mit MMC 20S Tonabnehmer. Plattenspieler funktioniert nicht! Die Abdeckung oben Ist gebrochen und hlt nicht mehr gut. Auerdem verkratzt. An den Seiten fehlen teilweise die Holzverkleidungen bzw. sind gebrochen. An Bastler abzugeben, die sich damit auskennen und den Plattenspieler reparieren knnen oder als Deko nutzen. Privatverkauf, keine Rcknahme.

cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

Bang & Olufsen MMC 20S turntable cartridge. Very good condition and in full working order, please study photos.

In working order, stylus still has some life left in it

cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

ITEM: Bang & Olufsen | B&O | Beogram 3400 | Turntable For details please see provided photos. It plays, sensor buttons seems to work, not sure if it plays at the right speed. You will receive the item as pictured, including accessories visible on the photos. If you have any questions don't hesitate to ask.Colors may be slightly altered due to camera lighting. All items are tested and cleaned. Condition of item will be as pictured. NOTE:  Item is used, this means that the item may have usage marks. Please see provided photos for the condition of the item. Alternative photos can be requested. Please do not leave negative feedback or open a case before contacting first. If you are not satisfied 100% for any reason, please contact me , as I am HAPPY to help you. As FEEDBACK is important to me.          NO RETURNS OR WARRANTY - SOLD FOR PARTS OR REPAIR PAYMENT: Accepted forms of payment: - Ebay Payments (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) SHIPPING: - All items will be dispatched using registered and insured shipping (Post NL, DPD or DHL depending on country).- When purchasing multiple items, they always will be combined. Some items may be shipped in two sparate packages.- Shipping to UK and any other non EU country ONLY by request ! Please send me a message first.  REFUND POLICY:(If applicable)  Any postage costs which incurred from the refund (including items that are free postage) will be deducted.          Unfortunately, I can’t grant a refund if the returned item is not in resaleable condition. Please note that the customer will bear the incurred delivery cost for returning the item.       PLEASE NOTE: I will not accept any bids, offers or buy it now from anyone with bad feedback or 5 stars or less and I reserve the right to cancel your bid. Please contact me prior to you bidding and I will be happy to accommodate your bids.  If you have any questions or requests please feel free to ask. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ARTIKEL: Bang & Olufsen | B&O | Beogram 3400 | Turntable Sie erhalten den abgebildeten Artikel einschließlich des auf den Fotos sichtbaren Zubehörs. Wenn Sie Fragen haben, zögern Sie nicht zu fragen.Die Farben können aufgrund der Kamerabeleuchtung leicht verändert sein. Alle Artikel werden getestet und gereinigt. Der Zustand des Artikels ist wie abgebildet. HINWEIS: Artikel verwendet wird, bedeutet dies, dass der Artikel möglicherweise Gebrauchsspuren aufweist. Den Zustand des Artikels entnehmen Sie bitte den bereitgestellten Fotos. Alternative Fotos können angefordert werden. Bitte hinterlassen Sie kein negatives Feedback und öffnen Sie keinen Fall, bevor Sie sich zuerst an uns wenden. Wenn Sie aus irgendeinem Grund nicht 100% zufrieden sind, kontaktieren Sie mich bitte, da ich GLÜCKLICH bin, Ihnen zu helfen. Da ist mir FEEDBACK wichtig. VORSICHT: KEINE RÜCKGABE ODER GARANTIE ZAHLUNG: Akzeptierte Zahlungsarten: - Ebay (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) VERSAND: - Alle Artikel werden per Einschreiben und versichert versandt (Post NL, DPD oder DHL je nach Land).- Beim Kauf mehrerer Artikel werden diese immer kombiniert. Einige Artikel werden möglicherweise in zwei Teilen geliefert RÜCKGABERECHT: Alle Portokosten, die aus der Rückerstattung entstehen (einschließlich Artikel, die kostenlos sind), werden abgezogen. Leider kann ich keine Rückerstattung gewähren, wenn sich der zurückgegebene Artikel nicht in einem wiederverkaufbaren Zustand befindet. Bitte beachten Sie, dass der Kunde die anfallenden Versandkosten für die Rücksendung des Artikels trägt.  BITTE BEACHTEN SIE: Ich akzeptiere keine Gebote, Angebote oder kaufe sie jetzt von Personen mit schlechtem Feedback oder 5 Sternen oder weniger und behalte mir das Recht vor, Ihr Gebot zu stornieren. Bitte kontaktieren Sie mich, bevor Sie bieten, und ich werde gerne Ihre Gebote annehmen. Wenn Sie Fragen oder Wünsche haben, können Sie diese gerne stellen.

cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

BANG AND OLUFSEN MMC 20S CARTRIDGE STYLUS VINTAGE TURNTABLE NEEDLE. See Photographs for condition, Looks like original needle.

FEEDBACK FROM A PREVIOUS BUYER:Dear David My Mum is now playing her records again. After ten years! She is absolutely delighted. You dont often get the chance to surprise and delight an 80 year old lady. Thanks so much for your help. BeoCenter 4600 Manufactured: 1977 - 1980 Designer: Jacob Jensen Colours: Rosewood, TeakBeocenter 4600 was a multi-way combination unit incorporating a 2 x 25 watts RMS AM/FM receiver, an easy to use hi-fi cassette deck and an automatic record player. The lightweight arm had built-in bias compensation and carried Bang & Olufsens MMC 20S pickup cartridge with spherical diamond stylus.The AM radio covered long and medium wavebands. Outstanding reception quality and high selectivity was secured by an Automatic Gain Control circuit, active noise suppression and hybrid filters.The FM tuner was highly sensitive. Four stations could be pre-set for subsequent instant recall. The hi-fi cassette deck had all the features and qualities normally expected only in a separate deck:* 3-digit counter with memory function* electronic tape stop at end of play* Dolby B Noise Reduction* chrome or normal tapes could be usedThe super Permalloy tape head was hard-wearing and had a long, useful lifetime. The record player too was automated: all functions were controlled by a single button. The anti-skating device worked automatically too. Bang & Olufsens MMC20S pickup cartridge with a spherical diamond was an integral part of this unit. Two Beovox S40 speakers complete this system if this was your choice. BeoCenter 4600 Product Specifications Type: 2631 (1977 - Dec 1980) Power output RMS DIN: 2 x 25 watts / 4 ohms 2 x 20 watts / 8 ohms Harmonic distortion < 0.1 % Intermodulation < 0.15 % Frequency range 20 - 30,000 Hz FM tuner range FM 87.5 - 108 MHz LW 150 - 350 kHz MW 520 - 1610 kHz Record-player: pickup MMC 20 S Recommended tracking force 15 mN / 1.5 g Speeds/control range 33 - 45 rpm / > +/- 3% Wow and flutter < +/- 0.09 % Rumble weighted > 62 dB Rumble unweighted > 42 dB Tape recorder: Wow and flutter: < +/- 0.2 % Speed deviation: > +/- 1 % Fast forward and rewind (C60) 85 sec I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20S Cartridge/StylusUk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1.5gram vertical tracking forceTested on a Beogram 2400-2 and 4002 and sounds crisp and clear on both channelsThe model replacement for the MMC3000Matches black systems like the Beocenter 3600 - available with a cartridge in my other listings giving you the look of the original systemKeep playing your vinyl in the manner it was meant to be heardLow Effective Tip Mass protects your most precious vinyl from wear and damage Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. This was the last of the MMC 20 range to be discontinued with cartridges being available late into the 1990s. It produced a typical warm B&O sound though lacked some of the more expensive models treble clarity. With an ETM of only 0.5mg, it was a fine cartridge and sturdy with it.The company’s range of MMC cartridges were integrated units, combining both stylus and cartridge as one slip-on unit. Matched, balanced and sealed in the factory each unit was meticulously computer tested with its results printed off and offered to the customer at time of sale. The printout included such information as output voltage, relative voltage output (channel balance), channel separation and frequency response. Manufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackMMC 20 CartridgesPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC 20 S is a stereo cartridge with a spherical framed diamond Any questions just get in touch, Id be glad to help.

cellule platine vinyle Bang & Olufsen MMC 20S complte et fonctionnelle

BANG OLUFSEN MMC20S STYLUS CARTRIDGE B&O I am also selling the whole Beocenter 4600 plus speakers. Let me know if you are interested in all the parts Thanks A

BANG & OLUFSEN MMC 20S STYLUS NEEDLE B&O FOR BEOCENTRE & BEOGRAM TURNTABLES LIGHTLY USED CONDITION AND PLAYS SUPERBLY. MMC20SManufactured: 1979 - 1985Designer: Jacob JensenColours: Black MMC cartridges were available with standard ½ mounting brackets, or with easy plug-in, lightweight connectors. These enabled you to mount MMC cartridges onto non-Bang & Olufsen arms. The cartridges plugged directly into Beogram pickup arms without additional mounting gear MMC 20 S was a stereo cartridge with a spherical framed diamond. In 1958, Bang & Olufsen introduced the first stereo pickup cartridge ever made in Europe. This was called the SP1. Since then, many design innovations and the creative use of new materials have kept B&Os cartridges at the forefront of audio technology. By 1979 - 80, Bang & Olufsens cartridges were represented by the MMC 20 series. MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis. The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker. A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources. No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. The MMC20 series therefore represented the closest that modern technology at that time, could possibly afford. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play. While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear. Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Bang & Olufsen cartridges have always been highly acclaimed for their low ETM values. The ETM of the standard MMC 20 range, only 0,5mg. MMC cartridges were manufactured by Bang & Olufsen as totally integrated units. This means that the elements were matched, balanced and sealed at the factory. Using a computer-supported testing programme,, each sealed unit was meticulously tested and its performance information automatically registered and packed with each cartridge. The information given included output voltage, relative voltage output (channel balance), channel separation and frequency response. Individually-calibrated frequency response curves were also supplied with the higher-specified MMC 20CL cartridges.

bang olufsen beogram 1100 turntable Type 5705 with stylus MMC20s+ BEOMASTER 1900. Both are Untested apart from switching on . The turntable turns and seems to be working fine. It is in good cosmetic condition apart from the cover not sitting correctly. It will need looking at. The beomaster 1900 lights up then turns off in a few seconds. Im not technically minded so I refrain from attempting to fix it. So for that reason the beomaster and beogram is faulty and both sold as seen for spares or repair. Im willing to post but prefer the system to be picked up in person if possible Thank you for your interestOn 20-Jun-23 at 21:52:05 BST, seller added the following information: Please note, bought as faulty/ not working, no returns. Many thanks