One monitor audio gold gxc 350 centre speaker Purchased from new 9 years ago I have been using a pair of these as a set of bookshelf speakers powered by a small 40W per channel amp. They sound fantastic and would be even better if paired with a better amplifier. Only selling due to a house move, downsizing and selling a bunch of my audio gear. Cash on colllection from Preston or Wigan Lancashire. I’m happy for the buyer to arrange there own courier, but this is at there own risk. I will do my best to package for you. Specifications taken from monitor audio website: System Format 3-Way Frequency Response 40 Hz - 60 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 8 Ohms Maximum SPL 113.8 dBA Power Handling (RMS) 200 W Recommended Amplifier Requirements 100 - 200 W Bass Alignment Sealed Cabinet Crossover Frequency L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Complement 2 x 6.5 RST bass/mid-range driver 1 x 4 RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions (H x W x D) 254 x 581 x 333 mm (10 x 227/8 x 131/8 inch) Weight 18.9 kg (41.6 lbs) Thanks Regards Jon

These Monitor Audio Gold 200 5G (current generation) Floorstanding Speakers have been on display in our Hereford showroom for 18 months and are now for sale. These speakers are in very good condition with no noticeable marks or scratches (light hairline marks from cleaning may be visible in the high gloss lacquer upon very close inspection) and are in the stunning High Gloss Ebony finish. The speakers found fabulous, are very well made and due to this are covered by Monitor Audios official 5 year warranty. These will come boxed in original packaging with grilles, spikes & feet and FREE Mainland UK Delivery via DPDs tracked & insured service. Hurry and grab a bargain! Monitor Audio Gold 200 Floorstanding Speakers - Dual HiVe II ports – improved transient response and tighter bass, due to smoother air-flow -- Pureflow silver-plated OFC copper internal cabling – highest quality transfer through the signal chain -- Soft-touch top trim – giving a luxurious, premium quality furniture grade touch and appearance -- Single-bolt-through driver technology – providing increased bracing strength, rigidity and driver/baffle de-coupling -- Bespoke magnetic grilles – clean visual styling, virtually acoustically transparent -The Monitor Audio Gold 200 - The elegantly crafted speaker is the most compact floorstander in the gold series. Like all the other speakers that fall into this category, they are all combined with the driver technology of Monitor Audios successful Plantium II flagship speakers. Not only do these speakers sound great, but they also look incredible.As this is more of a compact floorstander, the Gold 200 doesnt fail to deliver a full-scale performance. The Gold 200 features a three-way design, two ½ (165 mm) RDT II bass drivers beneath a 2½ (64 mm) C-CAM midrange driver with an MPD high-frequency transducer module, backed up by dual rear-firing HiVe II ports.The super tight and textured bass response, fantastic mid-range and a lovely smooth high-frequency attack will fully immerse you with nothing but superior sound. You can have these at any volume and it will still blow you away on how detailed any song can be.Who is Monitor Audio?Started in 1972 by the charismatic Mo Iqbal, Monitor Audio began loudspeaker design and production using tried and tested methods available at that time - plastic cone materials, fabric dome tweeters and reflex loaded braced cabinets. The speakers were welcomed by enthusiasts both in the UK and throughout the World. System Format3-way Frequency Response (-6 dB)35 Hz – 50 kHz Sensitivity (1W@1M)88 dB Nominal Impedance4 OhmsMinimum Impedance 3.4 Ohms @ 1 kHzMaximum SPL 114 dBA (Pair)Power Handling (RMS) 200 W Recommended Amplifier Requirements80 – 200 WBass Alignment Bass ReflexDual HiVe II port systemCrossover Frequency L.F/ M.F: 650 HzM.F/ H.F: 3.5 kHzDrive Unit Complement 2 x 61/2 RDT II long-throw bass driver1 x 21/2 C-CAM midrange driver1 x MPD high-frequency transducerExternal Dimensions (Including Grille and Terminals (H x W x D)950 x 195 x 330.6 mm External Dimensions (including Outrigger Feet and Spikes (H x W x D)997 x 282.8 x 387.8 mm Weight (each)21.86 kg (48 lb 2 oz)

Compact standmount speakers in very good condition. White Complete with magnetic grilles and port bungs. Well cared for from a smoke and pet free home. Sorry no box, so PICK UP ONLY PLEASE FROM GUILDFORD GU4, Close to M25 J10 2-Way luxurious bookshelf speaker. The sculpted low-diffraction cabinet of the diminutive GX50 houses a single 5 1/2” RST bass driver and C-CAM ribbon transducer. ----------------------------------------------------------------------------------------- System Format2-WayFrequency Response55 Hz - 60 kHzSensitivity (1W@1M)86 dBNominal Impedance8 OhmsMaximum SPL109.8 dBAPower Handling (RMS)100 WRecommended Amplifier Requirements50 - 100 WBass AlignmentBass reflex - HiVe port systemCrossover Frequency2.3 kHzDrive Unit Complement1 x 51/2 RST bass/mid-range driver1 x C-CAM H.F ribbon transducerExternal Dimensions (H x W x D)300 x 170 x 263 mm(1113/16 x 611/16 x 103/8 inch)Weight7.5 kg (16.5 lbs)

One monitor audio gold gxc 350 centre speaker Purchased from new 9 years ago I have been using a pair of these as a set of bookshelf speakers powered by a small 40W per channel amp. They sound fantastic and would be even better if paired with a better amplifier. Only selling due to a house move, downsizing and selling a bunch of my audio gear. Cash on colllection from Preston or Wigan Lancashire. I’m happy for the buyer to arrange there own courier, but this is at there own risk. I will do my best to package for you. Specifications taken from monitor audio website: System Format 3-Way Frequency Response 40 Hz - 60 kHz Sensitivity (1W@1M) 90 dB Nominal Impedance 8 Ohms Maximum SPL 113.8 dBA Power Handling (RMS) 200 W Recommended Amplifier Requirements 100 - 200 W Bass Alignment Sealed Cabinet Crossover Frequency L.F - M.F: 800 Hz M.F - H.F: 2.3 kHz Drive Unit Complement 2 x 6.5 RST bass/mid-range driver 1 x 4 RST mid-range driver 1 x C-CAM H.F ribbon transducer External Dimensions (H x W x D) 254 x 581 x 333 mm (10 x 227/8 x 131/8 inch) Weight 18.9 kg (41.6 lbs) Thanks Regards Jon