You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

MOFI Studio Deck Turntable - Excellent Condition!! Original owner of MOFI StudioDeck with MASTER TRACKER cartridge - Class B rated by Stereophile mag. ($799 on its own.) Smoked acrylic dust cover; has VERY slight swirl marks, no scratches/dings worth mentioning. It is still very glossy & you gotta look to see them. This is the only reason I rated 9/10. Plays beautifully. Does not have a 45 adapter.I am including a cork mat & acrylic platter mat (that I used on top of the cork mat in mint condition. Also including MOFI record weight ($200 accessory,) 2 Pine Tree Audio Iso-quad braided RCA interconnect (2; $42) and a USB rechargeable LED lamp with wood base you can place on the plinth. Original box & papers included.I had to lower the tonearm to pack it properly, so you will need to reset tonearm height especially if you plan on using the cool cork mat & acrylic platter mat. Very easy adjustment via allen screws on tonearm base. I bought this when I had a small vinyl collection - 25 LPs. Cartridge as 25-50 hours on it tops. Includes Orig box & manuals, accessories except as noted, Mofi record weight, Pine Tree Audio Iso-quad interconnects, cork mat, acrylic mat, LED rechargeable LED TT lamp.

You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

This was my daily turntable for a while. It does not come with a cartridge, but Im happy to help recommend one. I also do not have the original box. It is also missing the anti-skate weight. I personally do not believe in anti-skate. I dont think its good for a cartridge. Note the scratches on the dustcover. I personally take the dust cover off when Im using it. I put some rubber feet on the corners to keep from touching the ground. *No cartridge *No original box *No anti skate weight Ive shipped several Turntables in my day and I have some of the original packaging so rest assured itll be okay. If youre in Socal, lets arrange a pick up. Thanks!

You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

A lightly used mobile fidelity studiodeck. With ortofon 2m black cartridge. Includes dust cover, record weight, and original box and packing materials. I moved onto a VPI table and soundsmith cartridges, so this table has sat unused for a little while. The ortofon 2m black barely has enough hours on it to be considered broken in. Long time buyer, first time seller, so please leave good feedback if youre pleased.

You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

Verkaufe eine Mofi - Dustcover - Abdeckhaube für Ultra Deck oder Studio Deck. Die Adeckhaube ist mit meinem neuen Ultradeck mitgeliefert worden (hatte aber einen kleinen Mangel) (siehe Bilder mit roter Markierung). Der kleine Riss scheint im inneren des Plastiks zu liegen, da es sich von aussen glatt anfühlt. Habe eine neue Adeckhaube im Austausch erhalten und verkaufe nun die originale Abdeckhaube vom Mofi Ultradeck. Bitte unbedingt die Bilder ansehen bevor sie bieten. Der Mangel ist zwar sehr klein, hat mich aber gestört (wenn man den Neuanschaffungspreis bedenkt. Neupreis der Abdeckhaube ca. 300€ Kommt im Original Karton (Innenkarton + Aussenkarton) Aufgrund der Größe der Verpackung ist der Versand sehr teuer.

You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

Verkaufe eine Mofi - Dustcover - Abdeckhaube für Ultra Deck oder Studio Deck. Die Adeckhaube ist mit meinem neuen Ultradeck mitgeliefert worden (hatte aber einen kleinen Mangel) (siehe Bilder mit roter Markierung). Der kleine Riss scheint im inneren des Plastiks zu liegen, da es sich von aussen glatt anfühlt. Habe eine neue Adeckhaube im Austausch erhalten und verkaufe nun die originale Abdeckhaube vom Mofi Ultradeck. Bitte unbedingt die Bilder ansehen bevor sie bieten. Der Mangel ist zwar sehr klein, hat mich aber gestört (wenn man den Neuanschaffungspreis bedenkt. Neupreis der Abdeckhaube ca. 300€ Kommt im Original Karton (Innenkarton + Aussenkarton) Aufgrund der Größe der Verpackung ist der Versand sehr teuer.

MOFI Studio Deck + Turntable. In superb condition. Upgrade forces sale, this is less than 2 years old and has been very well looked after. The smoked coloured lid has a few hairline marks but no scratches, perfect colour to hide any blemishes. Prefer collection from Surrey to avoid damage in transit and its also very heavy for postage. These still retail at 1200 new, check out the reviews. Boxed with instructions etc.

You are bidding on a MoFi StudioDeck turntable with the UltraTracker turntable. I bought this as an open box deal which included the upgraded cartridge. The turntable is in great condition except for a minor blemish which is shown in the photo. StudioDeck Turntable 33-1/3 and 45.0 RPM belt drive turntable Custom design and manufactured in the USA 10-inch MoFi Studio Tonearm 3/4-inch Delrin® platter Isolated 300 RPM AC synchronous motor Anti-Vibration feet designed by HRS UltraTracker Cartridge - retails for $499 V-Twin dual-magnet generator Nude Elliptical stylus Well-damped billet aluminum body Includes the original box, manual, and tools. Happy bidding. 3.5mV output

MOFI Studio Deck + Turntable. In superb condition. Upgrade forces sale, this is less than 2 years old and has been very well looked after. The smoked coloured lid has a few hairline marks but no scratches, perfect colour to hide any blemishes. Prefer collection from Surrey to avoid damage in transit and its also very heavy for postage. These still retail at 1200 new, check out the reviews. Boxed with instructions etc.

Selling my MoFi StudioDeck without cartridge Used and in great shape with original box and cables. Purchased 2 Years ago from local HiFi shop - I am the original owner Fabric dust cover included Comes with dust over and isolation feet. Mount your cartridge and go! Specs below: Motor 300 RPM AC Synchronous Speeds 33 1/3 RPM, 45.0 RPM Platter 3.88 lb Delrin® Wow & Flutter 0.017% – 0.025% Signal-To-Noise Ratio 72dB Power Supply Requirements 120V 60Hz, 220-230V 50Hz, 100V 50Hz Power Consumption < 5W Dimensions 19.69 x 5.375 x 14.25 Weight 19.1 lb TONEARM SPECIFICATIONS Type 10 straight aluminum, gimbaled bearing Overhang 0.71 (18mm) Offset Angle 22.8? (+/- 2? adjustable) Cartridge Weight Range 5g – 10g FEATURES • 33-1/3 and 45.0 RPM belt drive turntable • Custom design and manufactured in the USA • 10-inch MoFi Studio Tonearm • 3/4-inch Delrin® platter • Isolated 300 RPM AC synchronous motor • Anti-Vibration feet designed by HRSn

Mofi StudioDeck+ Turntable Used, Like New. Barely Used this in fairness, used to test records in my office used approximately for maybe 5 hours listening time. The MoFi Studio Deck+ brought together engineers from Mofi and from the audio industry. Using the knowledge and insight from all parties the Studio Deck was born, Bringing cutting edge technology such as constrained layer damping to help reduce vibration absorbed into the turntable. The Studio Deck+ uses a decoupled AC synchronous motor which offers excellent pitch accuracy, offering both 33 and 45rpm A custom-built 10 straight tone arm provides adjustment from Azimuth, VTA and anti-skate. The Studio Deck+ come factory fitted with Mofi's own moving magnet StudioTracker cartridge. Unit will be packaged very safely, with bubble wrap and additional protective to make sure no damage during transit. Any questions or if you require more pictures then please let us know ! The cartridge has had approx 5 hours of listening. Shipping will be via Courier either UPS/DHL or available for pick up if easier.

Like New MoFi (Mobile Fidelity) StudioDeck With Ultra Tracker Stylus. Turntable + Ultra Tracker Needle/Cartridge. Very easy setup. Be up and running in less than 30 minutes.All the equipment is like new and comes with all the original cables, manuals and packing materials. UltraTracker cartridge, all original cables, dust cover, manuals and packing materials. I am only selling because I upgraded my turntable, cartridge and preamp. There is roughly 150 hours on the cartridge. Kept in climate controlled listening room. No smoke, no pets. The unit is Mint. It is a Very impressive table.$900. Signature Required. Buyer pays for half the shipping.Local pick up - FREE - in the Chicagoland area available ( St Charles, IL.)The following link is the MoFi product page for this table...https://www.mofielectronics.com/studiodeck-turntableAdditionally, there are numerous high rating reviews in this equipment for which you can find online.SPECIFICATIONS (from MoFi)Motor300 RPM AC SynchronousSpeeds33 1/3 RPM, 45.0 RPMPlatter3.88 lb Delrin®Wow & Flutter0.017% – 0.025%Signal-To-Noise Ratio72dBPower Supply Requirements120V 60Hz, 220-230V 50Hz, 100V 50HzPower Consumption< 5WDimensions19.69 x 5.375 x 14.25Weight19.1 lbTONEARM SPECIFICATIONSType10 straight aluminum, gimbaled bearingOverhang0.71 (18mm)Offset Angle22.8? (+/- 2? adjustable)Cartridge Weight Range5g – 10gFEATURES• 33-1/3 and 45.0 RPM belt drive turntable• Custom design and manufactured in the USA• 10-inch MoFi Studio Tonearm• 3/4-inch Delrin® platter• Isolated 300 RPM AC synchronous motor• Anti-Vibration feet designed by HRSIncludes:UltraTracker cartridge, all original cables, dust cover, manuals and packing materials.

MoFi Studiodeck + U mit Ultra Tracker TA System. Sehr wenig benutzt, in Top- Zustand. OVP und Original Rechnung von 12.2021.

Mofi StudioDeck turntable in very good condition. Small dents on the plinth and cover has minor scratch.Please check the photos as I sell this as a fully functioning but used item.It has served me well but I’m moving to the next level and need the space (and the money to reinvest ;-) ). Please contact me if you have questions. Local pick up preferred.Will be shipped in original packaging.

Mofi StudioDeck Turntable. Condition is Used. Shipped with USPS Parcel Select Ground.

Mofi StudioDeck Turntable. Condition is Used. Shipped with USPS Parcel Select Ground.

Mofi StudioDeck Turntable. Condition is Used. Shipped with USPS Parcel Select Ground.

Mofi StudioDeck Turntable. Condition is Used. Shipped with USPS Parcel Select Ground.

MoFi Studio Deck+ MasterTracker MM Cartridge and MoFi Super Heavyweight Record Weight. This item is in perfect working condition. It will be fully packaged in the original box and contain all contents as standard. Plus an upgraded to MasterTracker MM Cartridge and Super Heavyweight Noise Dissipation Record Weight. MoFi StudioDeck Plus MoFi Electronics StudioDeck +”entry level” turntable is a brilliant audiophile turntable/tonearm/cartridge package without the audiophile price tag! (StudioTracker cartridge is included) It’s only natural to use the word “Studio” in the name of one of our turntables, as doing so brings together MoFi’s software and hardware sides. SPECIFICATIONS Motor - 300 RPM AC Synchronous Speeds - 33 1/3 RPM, 45.0 RPM Platter - 3.88 lb Delrin® Wow & Flutter - 0.017% – 0.025% Signal-To-Noise Ratio - 72dB Power Supply Requirements - 220-230V 50Hz Power Consumption - < 5W Dimensions - 19.69 x 5.375 x 14.25 Weight - 19.1 lb TONEARM SPECIFICATIONS Type - 10 straight aluminum, gimbaled bearing Overhang - 0.71 (18mm) Offset Angle - 22.8? (+/- 2? adjustable) Cartridge Weight Range - 5g – 10g FEATURES • 33-1/3 and 45.0 RPM belt drive turntable • Custom design and manufactured in the USA • 10-inch MoFi Studio Tonearm • 3/4-inch Delrin® platter • Isolated 300 RPM AC synchronous motor • Anti-Vibration feet designed by HRS MoFi MasterTracker MM Cartridge MoFi cartridges are designed by looking at where a record starts: On a cutting lathe like the model used at Mobile Fidelity Sound Lab. MasterTracker features a V-Twin dual-magnet generator that mirrors the layout of the cutting head that originally makes a record’s grooves. Employing two low-mass, powerful magnets aligned in a V formation parallel with the record grooves, MasterTracker accurately extracts music from your LPs and features stellar tracking ability. Weight 9.7g Tracking Force 1.8–2.2g Impedance 47kOhm Capacitance 100pF Frequency Response 20–25,000Hz Stylus Micro-Line Output Voltage 3mV FEATURES: • V-Twin dual-magnet generator • Micro-Line stylus with tapered cantilever • Well-damped billet aluminum body • Ohno continuous cast copper coils • 3mV output Mobile Fidelity Super Heavyweight Noise Dissipation Record Weight An absolutely essential Analog Accessory for all turntable enthusiasts: the Mobile Fidelity Super HeavyWeight Noise-Dissipation Record Weight reduces Groove Noise from Your Stylus, improving clarity of your records.

MoFi Studio Deck+ MasterTracker MM Cartridge and MoFi Super Heavyweight Record Weight. This item is in perfect working condition. It will be fully packaged in the original box and contain all contents as standard. Plus an upgraded to MasterTracker MM Cartridge and Super Heavyweight Noise Dissipation Record Weight. MoFi StudioDeck Plus MoFi Electronics StudioDeck +”entry level” turntable is a brilliant audiophile turntable/tonearm/cartridge package without the audiophile price tag! (StudioTracker cartridge is included) It’s only natural to use the word “Studio” in the name of one of our turntables, as doing so brings together MoFi’s software and hardware sides. SPECIFICATIONS Motor - 300 RPM AC Synchronous Speeds - 33 1/3 RPM, 45.0 RPM Platter - 3.88 lb Delrin® Wow & Flutter - 0.017% – 0.025% Signal-To-Noise Ratio - 72dB Power Supply Requirements - 220-230V 50Hz Power Consumption - < 5W Dimensions - 19.69 x 5.375 x 14.25 Weight - 19.1 lb TONEARM SPECIFICATIONS Type - 10 straight aluminum, gimbaled bearing Overhang - 0.71 (18mm) Offset Angle - 22.8? (+/- 2? adjustable) Cartridge Weight Range - 5g – 10g FEATURES • 33-1/3 and 45.0 RPM belt drive turntable • Custom design and manufactured in the USA • 10-inch MoFi Studio Tonearm • 3/4-inch Delrin® platter • Isolated 300 RPM AC synchronous motor • Anti-Vibration feet designed by HRS MoFi MasterTracker MM Cartridge MoFi cartridges are designed by looking at where a record starts: On a cutting lathe like the model used at Mobile Fidelity Sound Lab. MasterTracker features a V-Twin dual-magnet generator that mirrors the layout of the cutting head that originally makes a record’s grooves. Employing two low-mass, powerful magnets aligned in a V formation parallel with the record grooves, MasterTracker accurately extracts music from your LPs and features stellar tracking ability. Weight 9.7g Tracking Force 1.8–2.2g Impedance 47kOhm Capacitance 100pF Frequency Response 20–25,000Hz Stylus Micro-Line Output Voltage 3mV FEATURES: • V-Twin dual-magnet generator • Micro-Line stylus with tapered cantilever • Well-damped billet aluminum body • Ohno continuous cast copper coils • 3mV output Mobile Fidelity Super Heavyweight Noise Dissipation Record Weight An absolutely essential Analog Accessory for all turntable enthusiasts: the Mobile Fidelity Super HeavyWeight Noise-Dissipation Record Weight reduces Groove Noise from Your Stylus, improving clarity of your records.