MICRO SEIKI ARM BOARD AX-1 (#1) This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-2 (#2) **This sale is for One Arm Board This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-1 (#2) **This listing is for one arm board This Micro Seiki AX-1 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. A second AX-1 is listed on another of our ads. As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad are five other M.S. arm boards recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

MICRO SEIKI ARM BOARD AX-4 This listing is for one Arm Board This Micro Seiki AX-4 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. We have listed an exact reproduction of the original AX-4 on another ad. (The reproduction is almost triple the weight of the original part so its probably made of steel, an alloy of iron and carbon.) As you can see in the photos this arm board is complete and in excellent condition. Shown in the photos for this ad, we recently listed five other M.S. arm boards in addition to this one. The Micro Seiki DDX-1000 shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.

Micro Seiki DD-20 Turntable - with Denon DL 110 Cartridge The Micro Seiki DD-20 features include:Special floating suspension systemA clean, crisp sound reproduction is always ensured by the DD-20s unique floating suspension system. The tonearm base and the turntable assembly are mounted on a sub-chassis which, in turn, floats within its base on special springs. So the tonearm is completely isolated from outside vibrations, and at the same time acoustic feedback is eliminated.Statically balanced tonearmMicro Seiki tonearms have won wide renown for their high sensitivity, precision engineering and use of high quality materials. The DD-20 tonearm uses a solid low resonance headshell so your cartridges performance may be fully displayed. To further reduce resonance, damping material is employed throughout the tonearm mounting.High torque DC servo motorExtreme speed stability together with increased torque have been achieved by using a special DC servo controlled motor. Temperature changes and voltage fluctuations have no effect on its rotational speed. And since the motor is connected directly to the platter, the resultant wow and flutter is less than 0.03% WRMS. In addition, this almost vibration-less unit provides a signal-to-noise ratio greater than 60dB.Precision machined high mass platterWeighing 1.5kg, the high mass platter possesses a 240 kg/cm moment of inertia. Close tolerance, high-precision machine technology is employed in engraving the stroboscope pattern and balancing the platter. You get unwavering speed accuracy.Inside force cancellerThis unique Micro Seiki mechanism corrects the tendency of an offset tonearm to favour the inner grooves of the record. It assures uniform stylus pressure between the left and right groove walls. The spring tension control is easily adjustable according to the tracking force you use.SpecificationsDrive system: direct drive with dc servo motorSpeeds: 33 and 45rpmFine speed adjustment: +-6%Platter: 320mm, 1.5kg die-cast aluminiumWow and flutter: less than 0.03%Signal to noise ratio: more than 60dBTonearm: static balanceEffective length: 222mmOverhang: 15mmDimensions:18 x 5.875 x 14.75 inches DENON DL-110 DL 110 DL110 PHONO CARTRIDGEThe Denon DL-110 phono cartridge was designed to enable more people to enjoy the exquisite sound quality of moving coil (MC) phono cartridges. Developed using Denons state of the art MC cartridge manufacturing know-how, the Denon DL-110 is a moving coil cartridge capable of producing a high output of 1.6mV which is equivalent to the output of moving magnet (MM) phono cartridges. The Denon DL-110 phono cartridge can thus be directly connected the MM phono input of your amplifier or receiver without the need for a step-up transformer, head amplifier or pre-preamp.State-of-the-art technology has been employed in the minute sections of the Denon DL-110 phono cartridge such as the traditional cross-shape armature, dual-construction cantilever and the vibration-center one point support method using suspension wires. This enables balanced characteristics and excellent sound quality comparable to higher priced cartridges.With the Denon DL-110 original vibrating section and its two-way damping method, sound quality fluctuations due to temperature differences are kept to a minimum. In addition, the overall weight has been reduced by simplifying the magnetic circuit thus improving the tracing ability of the stylus against record warps.The Denon DL-110 phono cartridge uses a special elliptical stylus with a rectangular cross section of 0.1 x 0.2 mm. It reaches deep into the record groove to extract detail while bypassing groove wall beaten and shorn by age, misuse and misalignment. Youll probably be surprised by how quiet your LPs sound.Denon DL-110 Phono Cartridge Specifications- Type: Moving coil- Output voltage: 1.6mV- Frequency response: 20Hz-45kHz- Recommended load impedance: over 47k ohms- Channel balance @ 1kHz: Within 1db- Channel separation @ 1kHz: > 25dB- Stylus tip: Special elliptical solid diamond with 0.1 x 0.2 mm rectangular cross section- Compliance: 8 x 10-6 cm/dyne- Recommended tracking force: 1.8mN +/- 3mN (1.8g +/- 0.3g)- Color: Red

MICRO SEIKI ARM BOARD AX-2 (#1) ** This listing is for one armboard This Micro Seiki AX-2 arm board was manufactured specifically for Micro Seikis DDX-1000 and MD-1000 turntables. It is made of light weight gun metal (aka red brass), an alloy of copper, tin and zinc. Another AX-2 of ours is listed on a different ad. As you can see in the photos one of the mounting screws is broken. Its possible to re-tap the hole but this arm board is non functional as it is. The price reflects the damage. Shown in the photos for this ad are five other M.S. arm boards we recently listed in addition to this one. The Micro Seiki DDX-1000 turntable shown in the photos is not for sale on this ad, it’s only there to display the arm boards in use. That DDX-1000 turntable is listed on another of our ads though.