We use a 24 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Description:- fully working and teste Rega Michell badged Rega RB tonearm, with techno weights (both sizes) Practically Unmarked and in full tested working order. No original box, but it will be packed to the highest standard for shipping. Great sounding arm. Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability, it has not been serviced by us, just described in it’s current operational and cosmetic order. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals will be ignored Any items suspected missing in transit, must be reported to us within 10 days. We take payments through the ebay managed payments system. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections We take payments through the ebay managed payments system. Visit our store!Hi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payments through the ebay managed payment system Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1545 (GS 9.4.1 (1545))

Michell Gyro SE turntable in silver / light grey finish with arm plate to suit Rega through-mount tonearms like the RB300 or earlier TecnoArm models. The Gyro SE is perhaps the most handsome version of this iconic Michell design. This one is the latest version and is in very good condition. It comes with the standard Gyro SE DC power supply (not pictured) and the optional Michell record clamp. We do not have the original packaging, but we can partially disassemble it and pack the pieces in lots of bubble wrap for safe posting. We will have to remove the bearing oil to prevent it from making a mess, but replacement oil is easy to find. Alternatively, you are welcome to come and collect it from Stockport in Greater Manchester or we can deliver it in person within a radius of 50 miles. Please note that the supplied arm plate is not compatible with the very latest Rega tonearms which use three additional small holes for fixing.

Michell Gyro SE turntable in silver / light grey finish with arm plate to suit Rega through-mount tonearms like the RB300 or earlier TecnoArm models. The Gyro SE is perhaps the most handsome version of this iconic Michell design. This one is the latest version and is in very good condition. It comes with the standard Gyro SE DC power supply (not pictured) and the optional Michell record clamp. We do not have the original packaging, so collection preferred from Stockport in Greater Manchester. We can provide bubblewrap and other packing materials to help transport it safely by car. We will consider delivery in person at extra cost. Please contact us prior to purchase to discuss your requirements. Please note that the supplied arm plate is not compatible with the latest Rega tonearms which use three additional small holes for fixing.

Michell Gyro/Orbe Rega Arm plate (3 Point Fixing). I have never used this mounting plate so it is in excellent condition. Suitable for any of the current and past 3 point mounting rega tonearms on any Gyrodec or Orbe. The older single point arms - the RB250, 300 etc can also be used with this mounting plate.

CELESTION SL600 MONITOR SPEAKERS CLASSIC DESIGN AND SOUND SUBLIME CONDITION IS GOOD WITH THE NEXTEL FINISH ACCEPTABLE ** STANDS NOT INCLUDED **

About Us Items for Sale View Feedback Visit our eBay Store! About Us Items for Sale View Feedback Have a Question? Get in touch today! Contact Us MICHELL TECNODEC & T3 TONEARM & TINTED COVER NEAR MINT EXAMPLE SOUNDS SUPERB! Check Out Our Feedback Have a Question? Get in touch! Follow Rare Vinyl UK! Fast and Free Delivery Trusted Brands 60 Day Returns Great Feedback Product Description PLEASE INSPECT THE PICTURES SUPPLIED VERY THROROUGHLY. THEY ARE PART OF THE ITEM DESCRIPTIONDO NOT BID ON OUR ITEMS IF YOU DO NOT INTEND TO PAY. IT IS ILLEGAL AND WE REPORT AND BLOCK ALL NON-PAYERSWe have for auction a near pristine example of the Michell Tecnodec in full working order and hardly used condition. It has been used with an Ortofon 2M Black cartridge (NOT INCLUDED) for less than 20 hours since new. It is complete with the original off board motor and power supply and included in the sale is a tinted acrylic cover (not Michell) which has some light blemishes. Being highly critical there are a few hairlines on the platter as seen under strong light.It is a lovely example just waiting for a suitable cartridge otherwise plug in and play. This turntable was used for a photographic shoot, but when tested sonically, with a Naim Supernait 3 /PMC Transmission line combination, we found it superior to anything else in the price range currently.Any questions welcome.The turntable will be packaged Professionally and is available fully insured RM Special Delivery, or Worldwide or cash on collection, Hertford SG13 by appointment. Overseas buyers, please message me for a tailored quotation. Information and Specifications:MICHELL TECNODECENTRY LEVEL REFERENCE TURNTABLEThe TecnoDec is Michells entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit.TecnoDec is an unsuspended turntable that utilises materials and technologies not normally found in entry level turntables, allowing you hear much more from your music.Pure Sorbothane feet inserts.Designed to isolate the turntable from structural vibration in the supporting surface.Impedance-matched platter.The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic.Free standing motor unit.Machined from a solid billet of aircraft grade aluminium, the turntable motor unit is designed to minimise any transfer of tiny vibrations created when the motor is running, to the sensitive parts of the turntable. When in operation the only connection between the motor and the rest of the turntable, is the drive belt turning the platter. This innovation lifts the performance of the TecnoDec and sets it apart from the competition.?Inverted oil circulating main bearing.Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Weight4.6kgWidth49cmDepth31cmHeight8.5cmT3 Tonearm:Michell T3 Tonearm with latest 3-point mount and ground lead.This Michel T3 tonearm features a brand new tube with increased rigidity to the bearing housing, arm carrier and head-shell coupled with intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assembly guarantees to gather more information from your vinyl than ever before.Features:Extreme stability with almost friction free movement from the high precision bearing assemblyLonger 6 inch ground lead with eyelet allows proper grounding to the turntable chassisBrand new tube with increased rigidity to the bearing housingCulmination of more than 30 years of tonearm designUsing the latest 3D CAD & CAM technology Grading & Valuation Our Grading Guarantee explained: We Grade your record carefully following the Record Collector Guide using many years of experience. However, grading is ultimately subjective and despite being very strict, we may not always please everyone. Please do not leave negative feedback if you are not fully satisfied. We offer a full No Quibble Return, Swap or Refund and we are here to help. In order to assist everyone who buys and sells rare discs, Record Collector magazine has originated a set of standards for the condition of second-hand records, cassettes and CDs. Anyone buying or selling records through the magazine must use our conditions to state what amount of wear and tear the disc, its sleeve and/or contents have been subject to. The seven standard condition categories, and a description of what each one means, are listed below: MINT (M) : The record itself is in brand new condition with no surface marks or deterioration in sound quality. The cover and any extra items such as the lyric sheet, booklet or poster are in perfect condition. Records advertised as Sealed or Unplayed should be Mint. EXCELLENT (EX): The record shows some signs of having been played, but there is very little lessening in sound quality. The cover and packaging might have slight wear and/or creasing. VERY GOOD (VG): The record has obviously been played many times, but displays no major deterioration in sound quality, despite noticeable surface marks and the occasional light scratch. Normal wear and tear on the cover or extra items, without any major defects, is acceptable. GOOD (G): The record has been played so much that the sound quality has noticeably deteriorated, perhaps with some distortion and mild scratches. The cover and contents suffer from folding, scuffing of edges, spine splits, discoloration, etc. FAIR (F): The record is still just playable but has not been cared for properly and displays considerable surface noise; it may even jump. The cover and contents will be torn, stained and/or defaced. POOR (P): The record will not play properly due to scratches, bad surface noise, etc. The cover and contents will be badly damaged or partly missing. BAD (B): The record is unplayable or might even be broken, and is only of use as a collection-filler. Shipping & Returns UK Mainland & Overseas/International Buyers: All items are sent via Royal Mail with standard insurance included, using new packaging materials and reinforcement where appropriate. The package will be wrapped with FRAGILE tape for extra security. We strongly recommend that you select Royal Mail Special Delivery within UK if your item(s) are valuable to ensure they are fully covered for loss or damage. Combined postage is available: To purchase more than 1 item or multiple items ,add items to your shopping cart/basket and use the request total from seller tab, I can then send you an invoice with the adjusted postage. Feedback Check out my feedback and have confidence in your buying experience! About Us I am a lifelong Collector of rare and sought after Vinyl Records and also have some great Vintage Cassette tapes! All my records are carefully graded using the Rare Record Collector Guide. I usually grade conservatively, and I provide high resolution photos of every item for sale. I ship worldwide and all records are guaranteed. Check out my feedback and have confidence in your buying experience! Designed by Jarilo Design

Rega Planar 6 Turntable/Michell TecnoArm/Ania Cartridge, VGC, 3 month warranty Rega Planar 6 Turntable/Michell TecnoArm/Ania Cartridge, VGC, 3 month warranty Although at first glance this turntable could be mistaken for its cheaper brother the Planar 3, it is quite clear once you look a little closer that this is a very different beast. All aspects of this deck have been thoroughly improved to give a far superior representation of the music it is asked to play. Our example is in very good condition with a small blemish to the front left corner and the usual lid wear please see photographs. It has been upgraded with the fitment of a Michell TecnoArm and Ania MC Cartridge. It comes with NEO PSU, mains cable, PSU cable, manual, full factory packaging and our 3 month warranty. Please note as we have no exact knowledge on the age or amount of use the cartridge has had, it will not be covered in our warranty. Rega Say…. The Planar 6 is constructed around a unique ultra-light foam core plinth and HPL laminates. It is designed to deliver a level of performance beyond anything at this price. The Planar 6 features the RB330 tonearm and a dual-layer float glass platter. The supplied Neo turntable power supply provides convenient speed selection, advanced anti-vibration control, and electronic fine speed adjustment. The Planar 6 is built around the huge success of the RP8 and RP10 turntables. It is the first new Rega turntable to be constructed with an ultra-lightweight Tancast 8 polyurethane foam core plinth (a material developed for the aerospace industry). This material is sandwiched between a new HPL (high pressure laminate). HPL is exceptionally thin whilst extremely rigid and is presented in a stunning Polaris matt grey finished with high gloss polymer black edge trim. The Planar 6 now benefits from a single piece, machined aluminium sub-platter, a new 24 V motor hand tuned and matched to its own Neo power supply and custom drive pulley fitted with our upgrade drive belt as standard. Super lightweight foam core plinth. Plinth laminate: New Polaris HPL (high pressure laminate). Non-marking matt finish scratch resistant high rigidity skin. Available in one finish ‘Polaris Grey’ matt finish with high gloss black polymer edge trim. Rega’s double brace technology, with integral custom matched aluminium tonearm and hub pillars to ensure maximum rigidity and accuracy. New high spec Rega 24 V low noise synchronous motor – each motor matched by hand to its own Neo PSU ensuring optimum anti-vibration control. Specifications: Motor: 24 V low noise motor Platter: Dual layer smoked / clear glass platter Connectivity: RCA / Phono Power: Mini DIN for connection to supplied Neo PSU Planar 6 Turntable Dimensions (lid closed): 447 (W) x 360 (D) x 120 (H) mm Weight: 5.2 kg Neo PSU Dimensions: 180 (W) x 155 (D) x 50 (H) mm Manufacturer : Rega Model : Planar 6 with Neo PSU / Michell TecnoArm / Ania MC Serial Number : 1089 Packaging : Original Accessories Included : PSU / Power Cables Price When New : £2000+ Shipping Shipping cost:Please contact us or check listing info. If you are outside the UK you will need a shipping quote BEFORE buying. Delivery time:48 hours Payment We accept the following payment methods: Paypal Credit/Debit Card BACS Please contact us if you have any questions. Service Established in 2003, 2ndhandhifi is the UKs largest stockist of used quality audio equipment. All items are checked before despatch and guaranteed for 30 days for ebay buyers to give you peace of mind that the item will arrive safely and work exactly as per ebay descriiptions. This means that all items described as used will be in good working order but may show minimal cosmetic marks resulting from everyday use. Any more significant cosmetic issues will be highlighted in the listing if present. We accept most payment methods but card payment to our shop is preferred. We use a reputable overnight courier service - items will be despatched next working day for delivery the next working day after that, but you are welcome to collect from our sister shop in Stockton on Tees if you prefer. Check our feedback if you have any doubts about the validity of this auction or us! We are a business so (although most times we do) we cannot always answer emails over the weekend so please try to ask Monday to Friday. Important 1. If there is no buy it now price stated, please dont ask - it is intended to be an auction which will run until its end time. 2. If you are outside the UK mainland please ask us for a shipping quote BEFORE placing a bid or clicking “Buy it Now”. If you dont ask, it means you will accept our quote. We do not cut corners on shipping, we only use reliable shipping companies, and we dont profit from the shipping prices we quote. 3. For any item where there is no original packaging the shipping costs include the cost to package the item to ensure safe delivery. Larger items may be shipped on a pallet - but this usually will be stated in the listing. 4. If you win the auction or buy the item, we expect you to pay and we will issue a non payment against you if you dont. Such auctions/listings cost us time (and therefore money). Requests to cancel will be rejected.

Michell Record Clamp - Silver, Rega and other plain spindle turntables. Opened but never used however it did come with a tiny mark on the inderside of the clamp.

Michell badged Rega rb300 tonearm in excellent condition Has full origin live mods and sounds amazing Internal rewire (current price £107) External rewire (current price £92) Structural modification (current price £92) Also has a 2mm spacer glued on, probably easy to remove with a small screwdriver but I will leave that for the winning bidder. For some reason the previous owner has removed the sleeve from the external cable Will be sent with next day delivery and fully insured

(Please note the turntable & any associated ancillaries are not included) This was originally designed to fit the Revilo Turntable (pictured) by Iceni Audio Ltd, however it is a one size fits all turntable cover. It will fit just about any type of turntable. It is CNC machined from 6mm Acrylic with flame edged polished sides for a truly impressive look. The lower section sits on the platter whilst the upper section protects the tonearm.  The two sections are held together with CNC machined Aluminium pillars, no hinges, simply lift off before playing. Overall height is 52mm from platter to top of the acrylic surface (if you have a particular requirement please get in touch) Lower section is 300 x 300 with radius end, upper section is 325 x 175 with radius cut-out. Please feel free to get in touch should you have any questions, you can also contact me through my website IceniAudio.co.uk Please note, I'm happy to ship Worldwide but if you want a tracked/signed for service it may cost more to ship

Original Rega fitting armboard for Michell Mycro or Syncro

Michell VTA adjuster for Rega arms. I bought this with the finger nut to use on my Rega rb300. Unfortunately although the finger nut is fine the adjuster doesn’t fit. This is the second item that I tried and it appears my Rega arm just doesn’t have the necessary tolerance since I understand this has been tested on 5 other arms. This sells for £30 separately

Original Rega fitting armboard for Michell Mycro or Syncro

Using a Goldring GR 1.2 plinth as the base, this plinth was stripped, cleaned and covered top and bottom with a vinyl wrap. These plinths have an edge on them and rubber corners which I think ‘finish’ it off. The original rubber Rega feet were replaced with 4 sprung feet which adds more stability than the 3 footed original design. The electrics and motor were replaced with a proper 24v Rega upgrade kit and powered with a Rega Neo Power Supply Unit so 33 and 45 rpm speeds can be selected, the only difference between this power supply and the latest version is the outer case, the electronics, I am told, are the same. The motor pulley was replaced with a double one and shorter belts used with a Delrin sub platter. A plinth brace was also installed and a SRM Tech acrylic platter was added which can be used without a mat, but I prefer a buffer between my record and the platter, so I used a thin cork and nitryl mat and will also include a felt mat as well. The arm was purchased as a Michell OEM RB303 from a ‘dealer’ but I have always had doubts about it, it definitely resembled a RB303 but is unbadged and the only ‘alteration’ made to it was that someone had soldered a 6 inch length of ‘wire’ to the ‘earth’ which was attached to the LH negative (which Rega seem to like doing), so this had some sort of odd double earthing arrangement, while at the other end of the arm, one of the cartridge connectors fell off and after getting nowhere complaining to the seller, I gave up and rewired the arm properly with Litz silver wire and a single separated earth and used a Din socket to RCA phono plugs for the tonearm cable with an ‘Earth’ cable from Gothic Audio. I also replaced the counterweight with an Iceni version which looks awesome sits much lower down and balances the arm a lot better. The resulting tonearm tracks and works very well. I gave up on using a Rega lid with those dreadful plastic hinges and used a zig-zag ‘thing’ that sits on the platter which keeps some of the dreaded dust off with the added advantage that due to its shape it deters family from plonking stuff on top of it. The Rega Neo Power Supply Unit was bought in a sort of ‘stock clearance’ and was expensive even then. It is amazing that the ‘Rega’ brand name can sell a power supply that allows you to change turntable speed at almost the cost of a original turntable. I have decided that I prefer my speed control on the turntable itself, not at the other end of my desk. Also a pity that it cannot be fitted to ALL Rega turntables so my son’s RP1 could benefit. As you may imagine, all this did cost a considerable amount of money. It was part of my long term project to create an ‘Ultimate Turntable’ using Rega components and with this example, I feel I have taken this as far as I want to, but it would be well worth your time to cost the individual components used to construct this turntable as someone could be getting a bargain. I feel I have proved that Rega components can be reconfigured into amazing configurations, but the cost is questionable so I am going to continue my research with cheaper alternatives. So, here’s the list. Goldring GR1.2 plinth, Tertullus sprung isolation feet, Rega 24v motor and circuitry with NEO CPU (with correct power supply and wires), twin motor pulley, Iceni ‘shorter’ drive belts, Delrin sub platter, Plinth brace, SRM Tech black acrylic platter, Elvon Acoustics platter mats, Michell ‘OEM’ (?) 303 (?Rega RB303) arm-rewired with Litz silver tonearm wire, Iceni counterweight, AT-VM95ML Cartridge, EARTH tonearm cable from Gothic Audio (Din connection to arm phono to Amp) plus the ‘sit-on’ lid, and, vinyl wrap with THUNDERCATS sticker (fairly easy to remove it you don’t like it) and, a record puck as well. You may find extra REGA stuff in the box, added as I package to stop me from trying to build any more of these turntables…it’s an addictive hobby, but not the most expensive…have you seen how much model railway stuff costs these days? …not to mention the cost of dog food! The cartridge itself has seen little use and the VM95 (Black) stylus is brand new so should give no problems. Due to the way I package turntables, you will need to be able to reassemble and set it all up with the tonearm tracking at 2 grams because I pack all components separately so nothing can be damaged in transit, so a familiarity with the construction of Rega turntables would be an advantage So, there it is, a Rega ‘What-ever-it-is’ turntable, complete and honestly described, for sale by auction with no buy it now price and UK only sale. Collection in person recommended but delivery via EVRI at a cost to you of £8.25. Thanks for looking and please bid generously as I have a needy poodle and a demanding support spaniel to look after. Please seem my ‘other items’ for my rather nice PRO-JECT 2XPERIENCE SB DC that I am also selling’On 16-Jun-23 at 14:13:54 BST, seller added the following information: It has been pointed out to me that I have put in the title that the stylus supplied is an AT-VM95ML, while I have photographed it with a VM 96E(black) so, to avoid confusion, the ML stylus is included. I would estimate that this stylus has had 30 hours play, but bear in mind that these are supposed to survive up to 1000 hours play. So there is one cartridge with TWO styli with this. An added bonus. If you read reviews on the styli made for the VM95 range, the ML does not fare that well and surprisingly the stylus most favored is the one I prefer, the XP5.                                                                                                                                                                                                                                                                                                      I am also amazed that the answers to most of the questions I am asked are in my description. Dont people read descriptions?

About Us Items for Sale View Feedback Visit our eBay Store! About Us Items for Sale View Feedback Have a Question? Get in touch today! Contact Us MICHELL TECNODEC & T3 TONEARM & TINTED COVER NEAR MINT EXAMPLE SOUNDS SUPERB! Check Out Our Feedback Have a Question? Get in touch! Follow Rare Vinyl UK! Fast and Free Delivery Trusted Brands 60 Day Returns Great Feedback Product Description PLEASE INSPECT THE PICTURES SUPPLIED VERY THROROUGHLY. THEY ARE PART OF THE ITEM DESCRIPTIONDO NOT BID ON OUR ITEMS IF YOU DO NOT INTEND TO PAY. IT IS ILLEGAL AND WE REPORT AND BLOCK ALL NON-PAYERSWe have for auction a near pristine example of the Michell Tecnodec in full working order and hardly used condition. It has been used with an Ortofon 2M Black cartridge (NOT INCLUDED) for less than 20 hours since new. It is complete with the original off board motor and power supply and included in the sale is a tinted acrylic cover (not Michell) which has some light blemishes. Being highly critical there are a few hairlines on the platter as seen under strong light.It is a lovely example just waiting for a suitable cartridge otherwise plug in and play. This turntable was used for a photographic shoot, but when tested sonically, with a Naim Supernait 3 /PMC Transmission line combination, we found it superior to anything else in the price range currently.Any questions welcome.The turntable will be packaged Professionally and is available fully insured RM Special Delivery, or Worldwide or cash on collection, Hertford SG13 by appointment. Overseas buyers, please message me for a tailored quotation. Information and Specifications:MICHELL TECNODECENTRY LEVEL REFERENCE TURNTABLEThe TecnoDec is Michells entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit.TecnoDec is an unsuspended turntable that utilises materials and technologies not normally found in entry level turntables, allowing you hear much more from your music.Pure Sorbothane feet inserts.Designed to isolate the turntable from structural vibration in the supporting surface.Impedance-matched platter.The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic.Free standing motor unit.Machined from a solid billet of aircraft grade aluminium, the turntable motor unit is designed to minimise any transfer of tiny vibrations created when the motor is running, to the sensitive parts of the turntable. When in operation the only connection between the motor and the rest of the turntable, is the drive belt turning the platter. This innovation lifts the performance of the TecnoDec and sets it apart from the competition.?Inverted oil circulating main bearing.Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Weight4.6kgWidth49cmDepth31cmHeight8.5cmT3 Tonearm:Michell T3 Tonearm with latest 3-point mount and ground lead.This Michel T3 tonearm features a brand new tube with increased rigidity to the bearing housing, arm carrier and head-shell coupled with intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assembly guarantees to gather more information from your vinyl than ever before.Features:Extreme stability with almost friction free movement from the high precision bearing assemblyLonger 6 inch ground lead with eyelet allows proper grounding to the turntable chassisBrand new tube with increased rigidity to the bearing housingCulmination of more than 30 years of tonearm designUsing the latest 3D CAD & CAM technology Grading & Valuation Our Grading Guarantee explained: We Grade your record carefully following the Record Collector Guide using many years of experience. However, grading is ultimately subjective and despite being very strict, we may not always please everyone. Please do not leave negative feedback if you are not fully satisfied. We offer a full No Quibble Return, Swap or Refund and we are here to help. In order to assist everyone who buys and sells rare discs, Record Collector magazine has originated a set of standards for the condition of second-hand records, cassettes and CDs. Anyone buying or selling records through the magazine must use our conditions to state what amount of wear and tear the disc, its sleeve and/or contents have been subject to. The seven standard condition categories, and a description of what each one means, are listed below: MINT (M) : The record itself is in brand new condition with no surface marks or deterioration in sound quality. The cover and any extra items such as the lyric sheet, booklet or poster are in perfect condition. Records advertised as Sealed or Unplayed should be Mint. EXCELLENT (EX): The record shows some signs of having been played, but there is very little lessening in sound quality. The cover and packaging might have slight wear and/or creasing. VERY GOOD (VG): The record has obviously been played many times, but displays no major deterioration in sound quality, despite noticeable surface marks and the occasional light scratch. Normal wear and tear on the cover or extra items, without any major defects, is acceptable. GOOD (G): The record has been played so much that the sound quality has noticeably deteriorated, perhaps with some distortion and mild scratches. The cover and contents suffer from folding, scuffing of edges, spine splits, discoloration, etc. FAIR (F): The record is still just playable but has not been cared for properly and displays considerable surface noise; it may even jump. The cover and contents will be torn, stained and/or defaced. POOR (P): The record will not play properly due to scratches, bad surface noise, etc. The cover and contents will be badly damaged or partly missing. BAD (B): The record is unplayable or might even be broken, and is only of use as a collection-filler. Shipping & Returns UK Mainland & Overseas/International Buyers: All items are sent via Royal Mail with standard insurance included, using new packaging materials and reinforcement where appropriate. The package will be wrapped with FRAGILE tape for extra security. We strongly recommend that you select Royal Mail Special Delivery within UK if your item(s) are valuable to ensure they are fully covered for loss or damage. Combined postage is available: To purchase more than 1 item or multiple items ,add items to your shopping cart/basket and use the request total from seller tab, I can then send you an invoice with the adjusted postage. Feedback Check out my feedback and have confidence in your buying experience! About Us I am a lifelong Collector of rare and sought after Vinyl Records and also have some great Vintage Cassette tapes! All my records are carefully graded using the Rare Record Collector Guide. I usually grade conservatively, and I provide high resolution photos of every item for sale. I ship worldwide and all records are guaranteed. Check out my feedback and have confidence in your buying experience! Designed by Jarilo Design

Michell Gyro/Orbe Rega Arm plate (Single Point Fixing) finished in black. I have never used this mounting plate so it is in excellent condition. Suitable older, single point mounting rega tonearms such as the R200, RB250, 300 etc... The earthing cable in the pictures is included. Item will be double boxed for safe delivery.

Original Rega fitting armboard for Michell Mycro or Syncro

HAVING JUST UPGRADED MY DECK I’M SELLING MY MICHELL REGA RECORD CLAMP AS ITS NO LONGER NEEDED. IN 9/10 CONDITION. THESE SELL NEW FOR AROUND £40 OR MORE. LOCATED IN NORTH LONDON (N11) AND HAPPY FOR LOCAL PICKUP FOR CASH SALE. OTHERWISE WILL BE WELL PACKED FOR POSTAGE. UK BUYERS ONLY PLEASE.

About Us Items for Sale View Feedback Visit our eBay Store! About Us Items for Sale View Feedback Have a Question? Get in touch today! Contact Us MICHELL TECNODEC & T3 TONEARM & TINTED COVER NEAR MINT EXAMPLE SOUNDS SUPERB! Check Out Our Feedback Have a Question? Get in touch! Follow Rare Vinyl UK! Fast and Free Delivery Trusted Brands 60 Day Returns Great Feedback Product Description PLEASE INSPECT THE PICTURES SUPPLIED VERY THROROUGHLY. THEY ARE PART OF THE ITEM DESCRIPTIONDO NOT BID ON OUR ITEMS IF YOU DO NOT INTEND TO PAY. IT IS ILLEGAL AND WE REPORT AND BLOCK ALL NON-PAYERSWe have for auction a near pristine example of the Michell Tecnodec in full working order and hardly used condition. It has been used with an Ortofon 2M Black cartridge (NOT INCLUDED) for less than 20 hours since new. It is complete with the original off board motor and power supply and included in the sale is a tinted acrylic cover (not Michell) which has some light blemishes. Being highly critical there are a few hairlines on the platter as seen under strong light.It is a lovely example just waiting for a suitable cartridge otherwise plug in and play. This turntable was used for a photographic shoot, but when tested sonically, with a Naim Supernait 3 /PMC Transmission line combination, we found it superior to anything else in the price range currently.Any questions welcome.The turntable will be packaged Professionally and is available fully insured RM Special Delivery, or Worldwide or cash on collection, Hertford SG13 by appointment. Overseas buyers, please message me for a tailored quotation. Information and Specifications:MICHELL TECNODECENTRY LEVEL REFERENCE TURNTABLEThe TecnoDec is Michells entry-level turntable, and shares many features developed for its bigger sibling, the GyroDec, such as the vibration dampening, impedance-matched platter, inverted oil circulating main bearing and a free-standing motor unit.TecnoDec is an unsuspended turntable that utilises materials and technologies not normally found in entry level turntables, allowing you hear much more from your music.Pure Sorbothane feet inserts.Designed to isolate the turntable from structural vibration in the supporting surface.Impedance-matched platter.The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic.Free standing motor unit.Machined from a solid billet of aircraft grade aluminium, the turntable motor unit is designed to minimise any transfer of tiny vibrations created when the motor is running, to the sensitive parts of the turntable. When in operation the only connection between the motor and the rest of the turntable, is the drive belt turning the platter. This innovation lifts the performance of the TecnoDec and sets it apart from the competition.?Inverted oil circulating main bearing.Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided.Weight4.6kgWidth49cmDepth31cmHeight8.5cmT3 Tonearm:Michell T3 Tonearm with latest 3-point mount and ground lead.This Michel T3 tonearm features a brand new tube with increased rigidity to the bearing housing, arm carrier and head-shell coupled with intelligent redistribution of mass, ensure this arm will exhibit fewer points of possible resonance. Extreme stability with almost friction free movement from the high precision bearing assembly guarantees to gather more information from your vinyl than ever before.Features:Extreme stability with almost friction free movement from the high precision bearing assemblyLonger 6 inch ground lead with eyelet allows proper grounding to the turntable chassisBrand new tube with increased rigidity to the bearing housingCulmination of more than 30 years of tonearm designUsing the latest 3D CAD & CAM technology Grading & Valuation Our Grading Guarantee explained: We Grade your record carefully following the Record Collector Guide using many years of experience. However, grading is ultimately subjective and despite being very strict, we may not always please everyone. Please do not leave negative feedback if you are not fully satisfied. We offer a full No Quibble Return, Swap or Refund and we are here to help. In order to assist everyone who buys and sells rare discs, Record Collector magazine has originated a set of standards for the condition of second-hand records, cassettes and CDs. Anyone buying or selling records through the magazine must use our conditions to state what amount of wear and tear the disc, its sleeve and/or contents have been subject to. The seven standard condition categories, and a description of what each one means, are listed below: MINT (M) : The record itself is in brand new condition with no surface marks or deterioration in sound quality. The cover and any extra items such as the lyric sheet, booklet or poster are in perfect condition. Records advertised as Sealed or Unplayed should be Mint. EXCELLENT (EX): The record shows some signs of having been played, but there is very little lessening in sound quality. The cover and packaging might have slight wear and/or creasing. VERY GOOD (VG): The record has obviously been played many times, but displays no major deterioration in sound quality, despite noticeable surface marks and the occasional light scratch. Normal wear and tear on the cover or extra items, without any major defects, is acceptable. GOOD (G): The record has been played so much that the sound quality has noticeably deteriorated, perhaps with some distortion and mild scratches. The cover and contents suffer from folding, scuffing of edges, spine splits, discoloration, etc. FAIR (F): The record is still just playable but has not been cared for properly and displays considerable surface noise; it may even jump. The cover and contents will be torn, stained and/or defaced. POOR (P): The record will not play properly due to scratches, bad surface noise, etc. The cover and contents will be badly damaged or partly missing. BAD (B): The record is unplayable or might even be broken, and is only of use as a collection-filler. Shipping & Returns UK Mainland & Overseas/International Buyers: All items are sent via Royal Mail with standard insurance included, using new packaging materials and reinforcement where appropriate. The package will be wrapped with FRAGILE tape for extra security. We strongly recommend that you select Royal Mail Special Delivery within UK if your item(s) are valuable to ensure they are fully covered for loss or damage. Combined postage is available: To purchase more than 1 item or multiple items ,add items to your shopping cart/basket and use the request total from seller tab, I can then send you an invoice with the adjusted postage. Feedback Check out my feedback and have confidence in your buying experience! About Us I am a lifelong Collector of rare and sought after Vinyl Records and also have some great Vintage Cassette tapes! All my records are carefully graded using the Rare Record Collector Guide. I usually grade conservatively, and I provide high resolution photos of every item for sale. I ship worldwide and all records are guaranteed. Check out my feedback and have confidence in your buying experience! Designed by Jarilo Design

Michell Technodec Rega Rb300 Technoweight. In very good condition and full working order apart from slight scuff mark to the motor pod (pictured). Deck comes fitted with rega rb300 which has been rewired with high quality cable, also comes with Michell technoweight. New belt recently fitted. Michell unicover and record clamp included in sale. Comes with power supply and manual. Collection welcome from Oxford or can ship in box with foam inserts. SPECIFICATIONS Pure Sorbothane feet inserts. Designed to isolate the turntable from structural vibration in the supporting surface. Impedance-matched platter. The platter material was chosen for its vibration dampening characteristics and because sonically it is a very similar material to vinyl, so it has a very neutral sound characteristic. Free standing motor unit. Machined from a solid billet of aircraft grade aluminium, the turntable motor unit is designed to minimise any transfer of tiny vibrations created when the motor is running, to the sensitive parts of the turntable. When in operation the only connection between the motor and the rest of the turntable, is the drive belt turning the platter. This innovation lifts the performance of the TecnoDec and sets it apart from the competition.? Inverted oil circulating main bearing. Contrary to traditional designs, our main bearing has the point of rotation at the top of the assembly, not at the bottom. This orientation allows us to fully lubricate the inside of the entire bearing while the platter is turning. We achieve this by way of a modified Archimedean screw that we machine into the inside bore of the bearing. The oil is drawn from a reservoir at the base of the main bearing up to the thrust ball at the top, fully lubricating as it goes, it then returns to the reservoir via a waste hole drilled into the bearing spindle. Lubricating the precision parts of the main bearing in this way means that any potential for noise or vibration created by the rotation of the platter is avoided. Any questions please ask and thanks for looking.

Michell Gyro/Orbe Rega Arm plate (Single Point Fixing) finished in black. I have never used this mounting plate so it is in excellent condition. Suitable older, single point mounting rega tonearms such as the R200, RB250, 300 etc... The earthing cable in the pictures is included. Item will be double boxed for safe delivery.

Here i am selling my fathers Michell Gyrodec Turntable. I endeavour to be as honest as possible with the description, however please be aware i am not a Hi-Fi expert. I am selling this on behalf of my father who is selling his house and downsizing, unfortunately this includes his stereo system and sadly the Gyrodec has got to go. Plinth & Lid This the full plinth model including hinged lid and dates from the early to mid 1980s.The plinth and lid are in good condition with no chips or deep scratches. This is not the clear plinth but rather the smoked acrylic one.The plinth also features the brass Gyrodec Badge, the brass itself has become mottled over time (my dad wasnt one for polishing) this can be seen in picture two. However i am sure that brasso should revive it. TurntableThe turntable is in good working condition and has been tested at both 33 1/3 & 45rpm and works perfectly. The bearing oil just been replaced. It is worth mentioning that there is an ever so slight grinding noise coming from the spindle. This is presumably due to thrust ball within the spindle becoming slightly worn. This is an easy fix as the thrust ball can be accessed without tools and i am told that a new thrust ball can acquired from Michell. This noise is only audible when there is no music playing, and is barely noticeable. I only bring it up to be as honest as possible. Something else worth pointing out is that the suspension towers are missing the caps/covers. To my knowledge i dont ever remember these being on the turntable. However should you want to replace them i am told that Michell can supply them. Tonearm & Cartridge The Turntable has recently been refitted with an unbadged Rega RB-250 Tonearm after the wiring on the previous RB-250 became damaged. Although the current tonearm does not have any Rega branding on it (it previously was fitted to a Technics deck) comparing it to the removed arm it is absolutely identical and clearly an RB-250.The tonearm is in good working order. As im sure the eagle eyed among you will have noticed the turntable is fitted with a relatively cheap Audio Technica cartridge. Although it is perfectly functioning it has only been fitted to demonstrate that the turntable is in working order. It would be assumed that whoever purchases the turntable would want to fit a more suitable cartridge, however i will still include the Audio Technica in the sale. Power Supply The unit comes with the Michell Gyropower PSU unit. This was an upgrade and a passive device with a transformer and extensive RLC filtering of the motor voltage. I have been told that these sell between £200-£400 To Summarise this is a fantastic turntable and is in good working order with the exception of the bearing noise. It would benefit from being set up by somebody with more experience and expertise than myself. It also would be worth considering having it serviced, bearing it mind it is at least 30 years old. Below is a link to the turntable in action. (just dont just judge its sound quality, its playing out of a relatively cheap amp and speakers in the middle of my kitchen. Not exactly an ideal listening experience.)https://youtube.com/shorts/BgMvE90zKS4 Collection only from Scarborough, North Yorkshire. If you have any questions please ask.

We use a 24 hour courier service but please allow up to 3 days handling time as a lot of our items are large and timeconsuming to package. Many thanks :) Please see our video of how we packaged turntables for transit here:-https://youtu.be/dVstrqCq0Gk Fully working and tested Michell Gyro SE turntable. Fitted with an Origin Live Rewired NAD badged Rega BR250 and Origin live mat. It has one or two, very minor ‘flea-bites’ to the plinth but as you can see, it’s still a lovely well looked after example. The weights have a little of their golds plate rubbed here and there, but it isn’t that noticeable, and to be honest they can also look great when polished back to silver too. motor is nice and quiet, standard power supply included. Please inspect the pictures (please also use the zoom function on the photos) and be sure of what you are buying, please don’t buy this if you are at all unsure, I will answer any questions you have, just email BEFORE PURCHASING. This is a used item and has been fairly described to the best of our ability, it has not been serviced by us, just described in it’s current operational and cosmetic order. If you are not happy with any item, we can arrange collection from you for a full refund (even if you are outside the UK) We will not provide any partial refunds and will not cover any restoration, detailed or internal cleaning, repairs or modification costs. Any questions regarding out of eBay deals will be ignored Any items suspected missing in transit, must be reported to us within 10 days. Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. Collections Collections from our unit in Bordon are available on Wednesdays and Fridays. Visit our storeHi-Fi Hangar Vintage hifi specialists Other PROJECTS, SPARES & REPAIRS HI-FI & AUDIO EQUIPMENT AMPLIFIERS DISK PLAYERS (CD/DVD/MD/SACD) TUNERS CASSETTE/TAPE DECKS SPEAKERS STUDIO EQUIPMENT TURNTABLES/RECORD PLAYERS CARTRIDGES TONEARMS MERCHANDISE T-SHIRTS ACCESSORIES Payment We take payment through the ebay managed payment system, Shipping We ship using a 24 hour courier. Please allow up to 3 days handling time as a lot of our items are large and take time to package well. _gsrx_vers_1516 (GS 9.3 (1516))

Michell Gyro/Orbe Rega Arm plate (Single Point Fixing) finished in black. I have never used this mounting plate so it is in excellent condition. Suitable older, single point mounting rega tonearms such as the R200, RB250, 300 etc... The earthing cable in the pictures is included. Item will be double boxed for safe delivery.