Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Orchid 69SE This Orchid 69SE is installed with TDA1541A-S1 not version S2Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID period Orchid 69SE DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Orchid 69SE DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary TDA541A R-2R digital to analog output.Orchid 69SE configured to be 16 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter TDA541A I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Orchid 69SE This Orchid 69SE is installed with TDA1541A-S1 not version S2Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID period Orchid 69SE DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Orchid 69SE DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary TDA541A R-2R digital to analog output.Orchid 69SE configured to be 16 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter TDA541A I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Oolong Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID periodPlease check shipping fee in your country, there are some area not in post service and hence the shipping will be by DHL or other carrier and fee is highOolong DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Oolong DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary PCM1704 R-2R digital to analog output.Oolong configured to be 24 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter PCM1704U-K (K grade)I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.

Orchid 69SE This Orchid 69SE is installed with TDA1541A-S1 not version S2Delivery time may delay due to COVIDIMPORTANT: Please left you phone/mobile no on buyers note phone is very important in this COVID period Orchid 69SE DAC is a non over-sampling, no digital filter, structured DAC. This tends to produce most realistic and natural sound.Orchid 69SE DAC is capable of up to 24bits/192kHz digital signal inputs yet remains driving legendary TDA541A R-2R digital to analog output.Orchid 69SE configured to be 16 bits output.The USB input section is in asynchronous operation.Total five independent digital inputs; AES/EBU, BNC, USB, RCA and Toslink.The 5 digital inputs are independent to each other, only one among them will be active and is controlled by the tact switches located in front panel. Tube buffered output, tube installed is Sovtek 6922 tube.Tubes can be used: 6DJ8, 6922 tube families100V, 115V, 215V, 230V power supply selectable from internal PCB pins setting Available in silver cabinet only.No powercord is included when ship out Specifications:Digital Receiver CS8416D/A converter TDA541A I/V stage: discrete ideal transistors (OPA861 used as transistor) , no feedbackFrequency response: 20 Hz to 20 kHz (± 2dB)Output impedance: 32 ohmsOutput level: 2.6 Vrms All inputs support 16/24 bits/ 32 kHz up to 192 kHzDimensions clear (W x D X H) 280 x 180 x 96 mmDimensions w/ socket (W x D X H) 280 x 200 x 96 mmWeight 4.2 kg All our DACs installed C-Media CM6631A chip as USB receiver.For Windows users: (Mac and Linux not influenced)Microsoft hasnt recognized usb 2.0 audio as standard Windows topology until very late version of W10.So,Before mid-2020, our DACs USB section configured as PID=0319 (use customized driver, 1.03 is recommended)In mid-2020, we start to configure our DACs to be PID=0004 (use W10 in box standard driver)?In PID=0004 condition, to use W10 in box standard driver you need to plug in our DAC and let W10 to search driver from the Web and then the W10 in box standard driver (digital signed by Microsoft) will be installed by Microsoft. If not automatic execute, you have to go control panel to install this in box driver. Why we start to configure our DAC to be PID=0004 is because that this in box driver can be automatically updated if necessary in every W10 update. PID=0319 and PID=0004 can be changeable by the firmware tool FWUdate.exe (2.0.1.11):to erase the current firmware and exit.unplug DAC and re-plug in and execute FWUpdate.exe and choose one of the digital unsigned hex to install.What PID now can be checked by FWUpdate.exe too If you purchase and we supply tracking no. but you cant get trace result from eBay, please use the provided tracking no. and use www.17track.net to trace the shipment.