This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies McIntosh C47 Stereo Preamplifier / DAC; MM/MC Phono Product SKU: 53929 Voltage: 120V # of Owners: 1 Service History: None Serial Number: AEH2485 Age: Unknown Tobacco Exposure: No MSRP: $4000 Cosmetic Description: Excellent condition with no notable blemishes.  What is Included: Preamplifier, Remote, Manual, Power cable, Factory packaging Other Notes: Integrated MM/MC phono stage included. Enjoy your music the way you want with the versatile C47 stereo preamplifier. With a total of 12 inputs, you can connect most if not all of your music sources. It even plays many of the latest high resolution digital formats – including DSD files. For analog audio, it includes 2 balanced and 3 unbalanced fully assignable inputs plus 1 Moving Coil and 1 Moving Magnet phono input for connecting a turntable. The digital inputs are comprised of 2 optical, 1 coaxial and 1 USB input. The optical and coax inputs will decode digital music at up to 24-bit/192kHz for high resolution audio playback. The C47 can also decode and play back high fidelity DSD files via the USB input, which accepts signals up to 32-bit/384kHz and supports DSD64, DSD128 and DSD256 along with DXD 352.8kHz and DXD 384kHz. To enjoy the high definition audio found on SACDs, you can connect the C47 to the MCT450 SACD/CD Transport via the MCT input to create a secure and custom DSD connection. Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $80- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

McIntosh MVP841 CD/DVD Player Very good condition 8.5/10. Glass front looks great, all lights work, plays excellent with audiophile sound quality. Included: CD player and power cord. Ships well-packed in double box. $3,500 msrp when new. The McIntosh MVP841 features advanced video processing and an ultra-stabletransport that optimizes disc playback. The Dolby Digital or DTS soundtrack data isavailable via an optical or coaxial digital output. The MVP841s high-performanceaudio section features a 24-bit Burr-Brown DAC that handles 24/96 music DVDs. Was factory refurbished.

This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies McIntosh MHA150 Headphone Amplifier / DAC; MHA-150 (No Remote) Product SKU: 53924 Voltage: 120V # of Owners: 2 Service History: None Serial Number: AET1416 Age: 3 years Tobacco Exposure: No MSRP: $5000 Cosmetic Description: Very good condition with minimal visible cosmetic wear including some minor scuffs and scratches on both sides along the chrome of the amplifier. There are a few scuffs along the right side edge of the faceplate. This item does show a few blemishes but is attractive overall and has been well cared for. What is Included: Amplifier, Power cable, Factory packaging (Remote Not Included) Other Notes: The MHA150 Headphone Amplifier is a worthy successor to the critically-acclaimed MHA100. The MHA150 contains the same feature set and performance standards but adds our new 2nd generation digital-to-analog converter (DAC) that provides support for DSD and DXD files to give you access to the latest in digital music. Like the MHA100, the MHA150 continues to take advantage of unique McIntosh technologies to create the best possible personal listening experience regardless of the headphones you use. Our Autoformer technology found in our large mono and stereo amplifiers has been adapted to produce three headphone impedance ranges of 8-40, 40-150 and 150-600 ohms so that every headphone will receive the legendary McIntosh sound quality and performance. Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $65- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

This McIntosh D200 DAC pre-amplifier is a top-of-the-line product for audiophiles who demand the best sound quality. With its advanced digital-to-analog converter, this unit supports multiple audio inputs including digital coaxial RCA, USB, and digital optical TOSLINK. It also features multiple audio outputs including digital coaxial RCA, stereo L/R RCA, and XLR. The brand new original price of this product is $4300, but now you can enjoy the exceptional sound quality it provides at a fraction of the price. This product has been thoroughly tested with Roon and is in excellent condition. Don't miss out on the chance to add this amazing product to your sound system. The MDA200 D/A Converter from McIntosh provides premium digital music capabilities. It can add digital music listening to an otherwise all analog home audio system, or it can also be a useful upgrade to an older D/A Converter that has become outdated and needs to be replaced so you can achieve better playback performance and enjoy current features. It is a stand-alone, outboard D/A Converter that can easily be added to home audio systems of various sizes, ages, and configurations. At the heart of the MDA200 is the McIntosh DA2 Digital Audio Module. The DA2 has 7 digital audio inputs: 2 coaxial, 2 optical, 1 USB and 1 MCT (for use with our MCT series of SACD/CD Transports), and 1 audio-only HDMI Audio Return Channel (ARC)1 connection. The DA2 is powered by a next generation, Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC). This audiophile-grade DAC features improved dynamic range and improved total harmonic distortion. The DA2 supports high resolution digital audio playback, as the USB input supports native playback of up to DSD512 and DXD up to 384kHz, while the coax and optical inputs can decode digital music up to 24-bit/192kHz. McIntosh MDA200 D/A Converter The HDMI (ARC) input allows TVs with a compatible HDMI (ARC) output to be connected to your home stereo system to bring a new level of audio performance to your TV and movie watching that TV speakers or soundbars just can't provide. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback.

This McIntosh MDA1000 Reference DAC is a highly sought after device for audiophiles and music enthusiasts. It is a top-of-the-line D/A converter that is compatible with McIntosh equipment and provides excellent sound quality. The device is built with high-quality materials and is built to last. Whether you are a professional musician or just someone who loves listening to high-quality audio, this DAC is a great investment. IntroductionThe new McIntosh MDA1000 D/A Converter offers a highly refined Balanced/Parallel Circuit utilizing eight of Burr Brown’s most sophisticated 24 Bit Digital to Analog (D/A) chips. Combine a MDA1000 with a McIntosh MCD1000 CD Transport and you will enjoy a playback system of unparalleled performance. Performance Features• Shielded 768kHz Up Sampling Module The McIntosh designed Up Sampling Module converts all of the incoming Digital Signals to the higher frequency of 768kHz with 24Bit resolution before the Digital to Analog process begins. • Shielded 24 Bit Digital to Analog Circuits The MDA1000 utilizes McIntosh’s own specially designed 24-bit Balanced Parallel Digital to Analog Converter Circuitry operating at 768kHz. This offers the widest possible dynamic range, lowest noise level and extremely low distortion. All of this produces sound quality that is truly exceptional. • Special Analog Filter and Output Amplifier The third order Butterworth gentle slope analog filter removes any remaining digital artifacts from the output signal. The low impedance Output Amplifer drives both the Balanced and Unbalanced Output Connections. • Balanced and Unbalanced Outputs Balanced connections guard against induced noise and allow long cable runs without compromising sound quality. There are also Unbalanced connections for components without Balanced Inputs. • Precision Tracking Volume Control Volume levels are controlled by a Precision Digitally Controlled Attenuator System with a tracking accuracy of 0.1dB. There is also a Volume Control Bypass Mode for a fixed output level. • Alphanumeric Fluorescent Display The Multifunction Front Panel Display indicates the Source Selection, Volume Levels and the Setup Mode Selections. The displays intensity is fully adjustable. • Digital Inputs with Title Reassignment The MDA1000 has provisions for three Coaxial Digital puts, three Optical Digital Inputs and one XRL Balanced Digital Input. Any of the seven inputs can have their Input Title reassigned to match the sources connected to the MDA1000. • Precision Parts Only the finest precision 1% tolerance metal film resistors and 5% tolerance Polyfilm Fliter Capacitors are used throughout. • Low Distortion Distortion levels of all types are less than 0.002%. Music is amplified with total transparency and accuracy. • Remote Power, Data Control and External IR Input Remote Power Control In/Out allows the MDA1000 to turn On/Off with a McIntosh Audio Control Center. The Data Port Input allows Remote Control Operation from another McIntosh Component. The IR Input allows for the connection of an IR Receiver. • Remote Control Operation A Remote Control is included that allows for complete control of major functions. • Glass Front Panel The famous McIntosh Illuminated Glass Front Panel with a three dimensional look ensures the pristine beauty of the MDA1000 will be retained for many years. • Fiber Optic Solid State Front Panel Illumination The Illumination of the Front Panel is accomplished by the combination of custom designed Fiber Optic Light Diffusers and Light Emitting Diodes (LEDs). This provides even Front Panel Illumination, together with the extra long life LEDs. • Machined Top and Side Panels The Top and Side of the MDA1000 are machined from thick aluminum panels with a smooth black anodized finish. In the recessed area of the Top Panel is a screened glass panel with a block diagram of the MDA1000’s circuitry. • Special Power Supply A fully regulated Power Supply with a special R-Core Power Transformer, ensures stable noise free operation even though the power line varies. InstallationThe MDA1000 can be placed upright on a table or shelf standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MDA1000 when it is custom installed as outlined below. The four feet together with the mounting screws should be retained for possible future use if the MDA1000 is removed from the custom installation and used free standing. The required panel cutout, ventilation cutout and unit dimensions are shown. Always provide adequate ventilation for your MDA1000. Cool operation ensures the longest possible operating life for any electronic instrument. Do not install the MDA1000 directly above a heat generating component such as a high powered amplifier. If all the components are installed in a single cabinet, a quiet running ventilation fan can be a definite asset in maintaining all the system components at the coolest possible operating temperature. A custom cabinet installation should provide the following minimum spacing dimensions for cool operation. Allow at least 2 inches (5.08cm) above the top, 2 inches (5.08cm) below the bottom and 1 inch (2.54cm) on each side of the D/A Converter, so that airflow is not obstructed. Allow 17 inches (43.18cm) depth behind the front panel. Allow 1-1/8 inch (2.9cm) in front of the mounting panel for knob clearance. Be sure to cut out a ventilation hole in the mounting shelf according to the dimensions in the drawing. Analog Audio SpecificationsFrequency Response ±0.5dB from 4Hz to 45,000Hz (Sampling Frequency - 96kHz and 88.2kHz) ±0.3dB from 4Hz to 22,000Hz (Sampling Frequency - 48kHz) ±0.3dB from 4Hz to 20,000Hz (Sampling Frequency - 44.1kHz) ±0.3dB from 4Hz to 15,000Hz (Sampling Frequency - 32kHz) Total Harmonic Distortion 0.002% at 1,000Hz Signal To Noise Ratio Better than 110dB (A Weighted) Dynamic Range Better than 100dB (1,000Hz) Rated Output Voltage 2V Unbalanced Outputs (BYPASS ON Mode) 6V Unbalanced Outputs (BYPASS OFF Mode) 2V Balanced Outputs (BYPASS ON Mode) 6V Balanced Outputs (BYPASS OFF Mode) Digital Audio SpecificationsDigital Audio Format IEC958, S/PDIF Coaxial Inputs (1, 2 and 3) 0.5Vp-p @75ohms Optical Inputs (4, 5 and 6) -15 ~ -20dBm XRL Input (7) 5V p-p @110 ohms Sampling Frequencys 96kHz, 48kHz, 44.1kHz and 32kHz General SpecificationsPower Requirements 100 Volts 50/60Hz, 20 watts 110 Volts 50/60Hz, 20 watts 120 Volts 50/60Hz, 20 watts 220 Volts 50/60Hz, 20 watts 230 Volts 50/60Hz, 20 watts 240 Volts 50/60Hz, 20 watts Note: Refer to the rear panel of the MDA1000 for the correct voltage. Overall Dimensions Width is 17-1/2 inches (44.45cm) Height is 6 inches (15.24cm) including feet Depth is 16-1/8 inches (40.96cm) including the Front Panel and Knobs Weight 24 pounds (10.89 kg) net, 38 pounds (17.24 kg) in shipping carton

This McIntosh D200 DAC pre-amplifier is a top-of-the-line product for audiophiles who demand the best sound quality. With its advanced digital-to-analog converter, this unit supports multiple audio inputs including digital coaxial RCA, USB, and digital optical TOSLINK. It also features multiple audio outputs including digital coaxial RCA, stereo L/R RCA, and XLR. The brand new original price of this product is $4300, but now you can enjoy the exceptional sound quality it provides at a fraction of the price. This product has been thoroughly tested with Roon and is in excellent condition. Don't miss out on the chance to add this amazing product to your sound system. The MDA200 D/A Converter from McIntosh provides premium digital music capabilities. It can add digital music listening to an otherwise all analog home audio system, or it can also be a useful upgrade to an older D/A Converter that has become outdated and needs to be replaced so you can achieve better playback performance and enjoy current features. It is a stand-alone, outboard D/A Converter that can easily be added to home audio systems of various sizes, ages, and configurations. At the heart of the MDA200 is the McIntosh DA2 Digital Audio Module. The DA2 has 7 digital audio inputs: 2 coaxial, 2 optical, 1 USB and 1 MCT (for use with our MCT series of SACD/CD Transports), and 1 audio-only HDMI Audio Return Channel (ARC)1 connection. The DA2 is powered by a next generation, Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC). This audiophile-grade DAC features improved dynamic range and improved total harmonic distortion. The DA2 supports high resolution digital audio playback, as the USB input supports native playback of up to DSD512 and DXD up to 384kHz, while the coax and optical inputs can decode digital music up to 24-bit/192kHz. McIntosh MDA200 D/A Converter The HDMI (ARC) input allows TVs with a compatible HDMI (ARC) output to be connected to your home stereo system to bring a new level of audio performance to your TV and movie watching that TV speakers or soundbars just can't provide. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback.

Replaced this D100 recently with an MA200. It’s in fantastic shape, boxes and ready to go. ? The D100 is a remote controlled digital stereo preamplifier with five digital inputs and both variable and fixed volume audio output. It is a simple solution to add digital music to your existing McIntosh system. ? The D100 is also flexible enough to be used as a headphone amplifier. Just connect your digital sources and a pair of headphones for a personal listening experience. ? Advanced Quad Balanced, Digital-to-Analog circuitry is capable of handling the finest commercial recordings, assuring the best sound from your valuable music collection. ? D100’s powerful built-in headphone amplifier will elevate the sound of your headphones to deliver the ultimate personal listening experience.

This McIntosh D200 DAC pre-amplifier is a top-of-the-line product for audiophiles who demand the best sound quality. With its advanced digital-to-analog converter, this unit supports multiple audio inputs including digital coaxial RCA, USB, and digital optical TOSLINK. It also features multiple audio outputs including digital coaxial RCA, stereo L/R RCA, and XLR. The brand new original price of this product is $4300, but now you can enjoy the exceptional sound quality it provides at a fraction of the price. This product has been thoroughly tested with Roon and is in excellent condition. Don't miss out on the chance to add this amazing product to your sound system. The MDA200 D/A Converter from McIntosh provides premium digital music capabilities. It can add digital music listening to an otherwise all analog home audio system, or it can also be a useful upgrade to an older D/A Converter that has become outdated and needs to be replaced so you can achieve better playback performance and enjoy current features. It is a stand-alone, outboard D/A Converter that can easily be added to home audio systems of various sizes, ages, and configurations. At the heart of the MDA200 is the McIntosh DA2 Digital Audio Module. The DA2 has 7 digital audio inputs: 2 coaxial, 2 optical, 1 USB and 1 MCT (for use with our MCT series of SACD/CD Transports), and 1 audio-only HDMI Audio Return Channel (ARC)1 connection. The DA2 is powered by a next generation, Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC). This audiophile-grade DAC features improved dynamic range and improved total harmonic distortion. The DA2 supports high resolution digital audio playback, as the USB input supports native playback of up to DSD512 and DXD up to 384kHz, while the coax and optical inputs can decode digital music up to 24-bit/192kHz. McIntosh MDA200 D/A Converter The HDMI (ARC) input allows TVs with a compatible HDMI (ARC) output to be connected to your home stereo system to bring a new level of audio performance to your TV and movie watching that TV speakers or soundbars just can't provide. Popular multi-channel audio formats from Dolby® and DTS® are supported and will be expertly converted to 2-channel audio for proper playback.

This McIntosh D100 Preamp/DAC is a versatile and high quality audio device suitable for audiophiles and music lovers alike. It features a range of audio inputs including Coaxial Digital, Digital Coaxial RCA, AUX, USB and Digital Optical TOSLINK, allowing you to connect to a variety of devices. The D100 also has a range of audio outputs including Digital Coaxial RCA, Stereo L/R RCA and XLR, giving you plenty of options when it comes to connecting to your amplifier or speakers. This unit is sleek and stylish in black, and features McIntoshs signature high quality construction and attention to detail. Continental US only.

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies McIntosh D150 DAC; D/A Converter Product SKU: 57759 Voltage: 120V # of Owners: 1 Service History: None Serial Number: AEA1409 Age: 4 Years Tobacco Exposure: No MSRP: $3500 Cosmetic Description: Good cosmetic condition with some minor visible cosmetic wear including tiny nicks on the glass faceplate, as well as across the top edge of the faceplate and top surface of the unit.  This item does show a few blemishes but is attractive overall and has been well cared for. What is Included: DAC, Remote, Manual, Power cable, Factory packaging Other Notes:  USB input is not guaranteed to be compatible with MacOS 10.14 or later. Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Cost to ship this item within the contiguous United States is a flat rate of $65- including packaging and insurance. For all other locations including Hawaii, Puerto Rico and Alaska, please request a quote prior to purchase. Items with factory packaging will be double boxed. When factory packaging not available re-usable shipping box with custom injected-foam mold will be used. (for all items over 10 lbs). Note that all items valued over $750 will require a signature upon delivery. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.