Description
Mark Levinson 585, Integrated Stereo Amplifier DA Wandler, High-End. - Mark Levinson 585 Integrated amplifier with DAC, most-accomplished integrated amplifier ever made: the No585. Combining Mark Levinsons unsurpassed analog performance with advanced digital audio capability and flexible system configuration, the No585 pushes the reproduction of any source material to new levels of realism.Sophisticated DACs and a broad array of digital inputs suitable formodern high-quality sources including high-definition 32-bit/192 kHzcomputer-based audio and DSD native and PCM via USB, along withfour analog inputs result in a compelling centerpiece for a truly highend audio systemHighest resolution discrete analog circuitry throughout, with high currentclass AB power amp channels providing output quality and power suitablefor high-end loudspeakersSatte Leistung, besonders in der dem Musiksignal entsprechenden Impulswiedergabe. Niedrige Verzerrungen, hohe Kanaltrennung ein Traum-Amp auch im Labor.Allgemeine DatenAusstattungVier Hochpegeleingnge, davon einer in XLR, sechs Digital-Inputs (1 x XLR, 2 x Koax, 2 x Lichtleiter, 1 x USB-PC), Fernbedienung, Balanceregelung, Phasenumkehr, umfassendes Men inklusive Pegelabgleich der Eingnge, Digitalfilterauswahl etc.https://youtu.be/SetpGtLdzLchttps://www.marklevinson.com/support/support-integrated-amplifiers/NO585-.htmlN585 HighlightsVersatility and flexibilityIconic Mark Levinson industrial design complements any decorUnsurpassed power and performanceRestores information lost during compression resulting in fuller more dynamic soundHeightened realismVariety and convenienceEase of useReliabilityProtects your investmentGeneral SpecificationsAmplifier Section Output Power200W RMS per channel @ 8 , 20Hz 20kHzAmplifier Section Damping Factor>400 @ 20Hz, referred to 8 Amplifier Section Frequency Response20Hz 20kHz, 0.13dB; 2Hz 250kHz, +0.2dB/3dBAmplifier Section Signal-to-Noise Ratio>98dB (20Hz 20kHz, unweighted); >103dB (20Hz 20kHz, A-wtd), referred to full output maximum volume settingAmplifier Section Voltage Gain40.7dB (maximum volume setting)Amplifier Section Total Harmonic Distortion45k (RCA & XLR)Preamplifier (Analog) Input Overload>5.5V RMS (RCA & XLR)Preamplifier (Digital) Sample Rates/Bit DepthPCM 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD Native, single- and double-speedAnalog Audio Connectors3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs (Hurricane binding posts w/banana sockets that accept spade lugs with 1/4 (6.3mm) spacing up to 1/8 (3mm) thick)Digital Audio Connectors1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)Control Connectors1 RS-232 port (RJ-12 connector); 1 IR input (1/8 phone jack); 1 programmable 12V DC trigger output (1/8 phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8 phone jack); 1 Ethernet port (RJ-45 connector)Mains Voltage100V AC, 115V AC, or 230V AC (factory-set)Power ConsumptionMaximum 1000W (power on)Unit Dimensions (H x W x D)6.9 (175mm) without feet; 7.59 (193mm) with feet x 17.25 (438mm) x 19.95 (507mm)Packaging Dimensions (H x W x D)19 (483mm) x 26 (660mm) x 26 (660mm)Weight72 lb (32.6kg) net; 96 lb (43.4kg) with packagingAudio SpecificationsAmplifier Section Output Power200W RMS per channel @ 8 , 20Hz 20kHzAmplifier Section Damping Factor>400 @ 20Hz, referred to 8 Amplifier Section Frequency Response20Hz 20kHz, 0.13dB; 2Hz 250kHz, +0.2dB/3dBAmplifier Section Signal-to-Noise Ratio>98dB (20Hz 20kHz, unweighted); >103dB (20Hz 20kHz, A-wtd), referred to full output maximum volume settingAmplifier Section Voltage Gain40.7dB (maximum volume setting)Amplifier Section Total Harmonic Distortion45k (RCA & XLR)Preamplifier (Analog) Input Overload>5.5V RMS (RCA & XLR)Preamplifier (Digital) Sample Rates/Bit DepthPCM 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit; DSD Native, single- and double-speedAnalog Audio Connectors3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs (Hurricane binding posts w/banana sockets that accept spade lugs with 1/4 (6.3mm) spacing up to 1/8 (3mm) thick)Digital Audio Connectors1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)Control Connectors1 RS-232 port (RJ-12 connector); 1 IR input (1/8 phone jack); 1 programmable 12V DC trigger output (1/8 phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8 phone jack); 1 Ethernet port (RJ-45 connector)Mains Voltage100V AC, 115V AC, or 230V AC (factory-set)Power ConsumptionMaximum 1000W (power on)Unit Dimensions (H x W x D)6.9 (175mm) without feet; 7.59 (193mm) with feet x 17.25 (438mm) x 19.95 (507mm)Packaging Dimensions (H x W x D)19 (483mm) x 26 (660mm) x 26 (660mm)Weight72 lb (32.6kg) net; 96 lb (43.4kg) with packaging....................International Buyers Condition: UsedThis item works well.This is a used product in very good condition- Payment -The item will be shipped within 10 days after payment is confirmed.Shipping by FedEx or DHL.A tracking number will be provided.-International Buyers -Import duties, taxes and charges are not included in the price of the item or the shipping cost. These charges are the responsibility of the buyer.Please check with your countrys customs office to determine how much these additional costs will be prior to bidding/purchasing.
Live search