LUXMAN PD441 Turntable Arm BaseDescriptionLUXMAN PD441 Turntable Arm BaseA turntable that uses a floating motor and was released around 1977.A player system that uses a floating motor. The PD441 has the same design as the PD444, and is compact in size by being compatible with one standard tonearm. The drive unit uses a quartz lock type direct drive system. The quartz lock system suppresses disturbance load fluctuations in the DC range and below 1Hz, and also suppresses instantaneous drift and temperature drift. Additionally, in order to suppress disturbance load fluctuations in the relatively high frequency range of 5Hz to 10Hz or higher, which is beyond the reach of quartz control, it is necessary to utilize the flywheel effect of the turntable, but bearing life becomes an issue. To address this issue, we have adopted Luxs unique load-free spindle system. This method uses the magnetic force inside the motor to attract the rotor upward, canceling out the weight of the turntable. This reduces the load on the turntable on the bearing to about 1/5. The chassis uses a sandwich structure in which a high-density chipboard is sandwiched between two 3.2 mm steel plates, achieving a highly rigid structure that is difficult to resonate. The insulator uses a low fo two-stage braking insulator. This insulator is effective against both small amplitude vibrations that cause howling and large amplitude vibrations that tend to occur during player operation. A sliding arm base is used for the arm base, allowing for easy arm replacement and overhang adjustment. The arm base is a combination of a zinc die-cast base and an aluminum extrusion panel, and has a structure that slides on the arm base rail, and is fixed by lever operation. Equipped with a platter mat to improve adhesion to records and dump turntables. ??Operation/Appearance?- It works well and the turntable rotates.(This product is compatible with 50/60Hz.) -The rubber mat is soft and will not deteriorate or warp.-Buttons and switches work normally. -The power ON lamp and the lamp will light up when switching rotation.?There are some scratches and signs of use.However, there is no major damage and it is in good condition.(We are not experts, so we cannot confirm detailed settings or accuracy. Please use this as a reference.) set content?Body?Rubber mat(Everything shown in the photo is included.) The product is protected with secure packaging. Management number: -E011101Shipping Please Check The Shipping Policy International Buyers - Please Note:????????????????????????????????????????????????????????????????Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Template CDGSlightly scratched and dirtyBLU Description Armrest for arm base for LUXMAN PD555/PD444/PD441 ?Product contentsManufacturer: LUXMANProduct name: Armrest for PD444/PD555/PD441 arm base ?Accessories *All items shown in the photo are included. Please check it. ?ConditionIt is glossy/shiny and beautiful with no noticeable scratches.Considering its age, we consider it to be in good condition. This is a used item only.Please note that there may be some scratches/dullness/feeling due to age/use. Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

????Including & Condition Details:As shown in photos. Please check the photos for details. A turntable that adopted a floating motor released around 1977. PD444 Same design as double arm turntable, PD441 is compact size for one tone arm. It uses a sliding arm base that can be easily attached and detached, and a wide range of arms can be used by rearranging the TP series. This is an attractive piece unique to LUXMAN, with its sandwich structure chassis and bright zinc die-cast base giving it a luxurious feel.?Condition: Each part has been polished/cleaned. ????Shipping: FedEx ????Message from SellerHi, my name is Danny Chou. I live in Tokyo, Japan. I can speak quite fluent English :)I can source anything you want from Japan! Feel free to contact me anytime! ??Check Your AddressPlease check your address before paying because we can ONLY ship to addresses that are entered before placing the order. We cannot change an address after the order has already been placed. ??Tracking & PackingPackages: Box or envelope and Bubble wrapWe provide valid Tracking Numbers for all orders.All our international packages will be shipped by FedEx or DHL. ??ReturnWe offer a standard FREE 60 days refund or exchange policy. Item must be returned in original condition in order to receive a full refund. ????Customs DutyImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Powers on, turntable turns. No further testing done.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Description of itemThank you for visiting! Our shop is 100% Authentic item. If you have any questions, please be free to ask us.  Have a great shopping on ebay! Paymentwe accept payment only through ebay Managed Payment. Shipping-Japan Post: 5-20 days to arrive -DHL: 5-10 days to arrival *We will ship the item by Japan post or DHL.  If you need expedited shipping, please let me know. I will ask you about extra payment.  Depending on the size and weight after packing the items, The shipping method may change depending on your location. **If you live in a remote area, We might ask extra charge for intenrational shipping. Please contact us for additional charges Shipping is only available to the address registered on ebay. Please note that any address not registered in ebay is not acceptable to ship. Shipping is available from Monday to Friday. **If you live in a remote area, We might ask extra charge for intenrational shipping. Weekends are not available because post office is closed.Term of sale-Return We accept product return within 30days from delivery date but product should be in original position and not in damaged condition,the return shipping charges will be buyer responsibility. -International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

Luxman PD 441 Direct Drive Turntable Tested And Working. THERE IS NO TONEARM INCLUDED THE ARMBOARD IS FOR AN SAEC 308 This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable Tested And Working. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

LUXMAN PD441 turntable record player Description Operation has been confirmed!Both 33.45 rpm are good.Sound output confirmed.cartridge, audiotechnicaAT15Ea needle included.direct driveSize, width 474. height 160. depth 392weight 17kg Payment We accept PayPal only. Shipping Ill ship the item via FedEx or DHL asap without a shipping fee.I attach the tracking number.I will ship the item 5 business days after your payment clears.Shipping is only available to the address registered in Paypal.Please note that any address not registered in Paypal is not acceptable to ship. Terms of Sale Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be before bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. Your Terms of Sale will be inserted here. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Provided by HARU

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Luxman PD 441 Direct Drive Turntable W/ SAEC 308 Tonearm. Tested And Working. There is no cartridge and no Tonearm cable. This is an amazingly well made and sounding turntable. THIS IS 100 volts and will need a step down transformer which are plentiful on Amazon. There are issues with the dust cover. See pics. Otherwise a very clean and fine sounding table. Will be packed to survive with the platter off and lots of padding.

Condition Description? State At the arm insertion port on the lower base die-cast side Some processing can be seen, but there is no problem in using it. There are no noticeable scratches on the upper base panel and it is in a beautiful state. ? Product details Manufacturer: LUXMAN Model: TP-LS Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.