2 Valve Index VR Controller Links und Rechts. beide Kontroller quitschen etwas wenn man die Schuktertasten drückt aber beide haben keine Drift Probleme

Valve Index VR Controller Links. Nur der linke Controller OVP und kein Headset.

KIWI design USB Radiator Fans Accessories for Valve Index, Cooling Heat....

This item requires a sling to use effectively. If you dont have one, please see our other listings that include a sling. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from our website mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

This item requires a sling to use effectively. If you dont have one, please see our other listings that include a sling. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from our website mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

This item requires a sling to use effectively. If you dont have one, please see our other listings that include a sling. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from our website mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

This item requires a sling to use effectively. If you dont have one, please see our other listings that include a sling. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from our website mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

This item requires a sling to use effectively. If you dont have one, please see our other listings that include a sling. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from our website mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

Linn Index speakers - pair (used, fully working). Theyre in good condition but with signs of use including some scratching, especially on the base (see pictures for detail). Front covers are intact. 285 w x 186 d x 440 h (covers add 15mm to the depth). Collection from Newcastle upon Tyne preferred, but I will post if needed.

linn index speakers and speaker stands. Unfortunately one of the base drivers is blown and there is slight damage to one of the kustone stands. Overall the cabinets are in great condition as is the speaker cloth. They are boxed but collection is preferred because of the size and weight.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

NOTE: this listing includes the two-point sling add-on. Please state your device and trigger hand during checkout, You will receive a right handed version for the Quest 2, unless otherwise stated. Device options;Quest 2 Quest ProValve IndexPico 4Quest 1Rift SPSVR2 (+£10 and only available on our website, not available as an option on this listing, please purchase from mint3d.design) Visit mint3d.design for more options, including dual magnet reload mounts, Elite rifle and the new PSVR2. We are the ONLY approved partner of Sanlaki for their Gunstock range. www.sanlaki.shop/pages/verified-partners. Aim better in Contractors, Onward, Pavlov and more! Perks of using this magnetic gunstock:* RELOAD FASTER* STABILIZE AIM* NATURAL FEEL* COMPATIBLE WITH MOST WEAPONS (rifles, heavy, smgs) If you are new to using a VR Gunstock, please make sure to practice mounting and un-mounting without the headset on first, to develop muscle memory! It takes around 15-90 mins to get used to it. Please be patient! Join the Sanlaki discord for tips: https://discord.gg/N6d2vZvq PRODUCT INFO:- This product comes in three parts that screw together - front barrel, body frame, buttstock.- You may want to swap the pipe used in the buttstock (8) with the front barrel (10) if you feel the controllers are too close.- The controller mounts are labelled L & R. CONTRACTORS - there are two ways to use the gunstock. Video: https://youtu.be/0uf3k1CWyTc1. Easy: physical gun stock mode: OFF. Use as-is and no need to adjust any settings.2. Advanced: physical gun stock mode: ON. This will allow you to better match the gunstock with in-game weapons BUT you need to manually calibrate ALL weapons! ONWARD - Weapons compatibility: https://youtu.be/1qmbrhOn3EsTips for Onward players:Best set up: holographic sight + foregrip!Some weapons are NOT compatible when using iron sight - use holographic, red dot, or similar to fix the issue!12x and 4x zoom works on ALL rifles EXCEPT for the Bolt action (M40A5) CLAY HUNT VR- Disable second controller- Pitch + 17- (optional - Y axis + 5) This Gunstock is designed for 18+. PLEASE NOTE:Due to the nature of FDM/Additive 3D printing technology - there may be slight imperfections on the surface, which doesnt affect the functionality of the product. REMINDER:Do not leave the 3D printed parts on hot areas! Avoid leaving them inside your car on a hot day and or out in the sun. The 3D prints may warp. CS Creative ltd (MINT 3D) does not accept any liability for any damage caused to equipment, or personal property while using this item. It is the users responsibility, and by completing a purchase, you are agreeing to these terms.

Valve Index VR Full Kit Controller Charging Station Kiwi Cooling Upgrade. Used for about 30 hours, always well looked after, has been in storage for 6 months due to house move and I dont have the space anymore. Kiwi cooling kit for the headset and wall mounted charging station for handsets includes magnetic snap charging cables for convenience. Headset wall mount. Couple of minor scuffs on the controllers but otherwise like new. Included a little USB plug for controller charging. Will insure postage.

Verkauft wird das komplette Valve Index Kit sowie einiges an Zubehör. Ich verkaufe alles weil ich dieses System schon länger nicht mehr nutze (Dank Oculus Quest 2 & Co.). Wer aber ein kabelgebundenes System mit sehr stabilem Tracking sucht, ist bei der Valve Index richtig. Meiner Meinung nach funktionieren Spiele wie Beat Saber oder HL: Alyx damit am besten. Das Headset befindet sich im sehr guten Zustand, die Linsen haben keine Kratzer oder sonstige Fehler. Es liegt noch ein zweites, neues Gesichtspolster bei. Für die Controller habe ich eine Ladevorrichtung ausgedruckt (3D-Druck). Im Controller steckt ein USB-C Adapter welcher magnetisch mit der Ladeschale verbunden ist. Somit braucht man nicht jedes Mal ein Kabel einzustecken wenn geladen werden muss, sondern nur die Controller in die Ladeschale auflegen. Weiterhin liegt das Chilldex der Brille bei welches für Kühlung sorgt. Das sind zwei kleine Lüfter die manuell oder temperaturgesteuert werden. Zuletzt habe ich noch Halterungen für die Basisstationen erstellt (3D-Druck) die das Montieren an der Wand ermöglichen so dass die Basisstationen einfach abgesteckt werden können. Zudem lässt sich mit dem Eckadapter ein größerer Neigungswinkel erreichen - bei mir in der Wohnung war das nötig, das ist aber optional. Bei erfolgreicher Auktion übernehme ich den versicherten Versand. Es handelt sich um einen Privatverkauf, ich übernehme keine Gewährleistung oder Garantie. Auch biete ich keine Rücknahme oder Rücktritt vom Kaufvertrag bei Nichtgefallen, Sinneswandel usw. an, sofern kein zwingender rechtlicher Grund vorliegt.

KIWI VR 3x Cable Management Ceiling Pulley System Fits Vive Index Valve. Packaging has some wear on it but is factory sealed

Linn Index LS120 loudspeaker owners (instruction) manual in excellent condition, no wear and tear at all. From a smoke, pet and child free home! Paypal and UK bidders only please. NB.... I have an extensive and varied private music collection including: vinyl LPs, 12” and 7” singles and also CDs (both albums and singles). If you are looking for a particular item, please feel free to message me as I may have the one you are looking for! Please also see my other listings.