Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts 008487Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundDescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?https://flatlineacoustics.com/product/ls-650-ic/

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundDescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?https://flatlineacoustics.com/product/ls-650-ic/

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

These stands have been personally designed and made by our team using many years of experience and deep passion for music !!! Our stands are unique and you will not find any similar ones on the current market !!! They will fit perfectly with VARIOUS types of speakers, especially those older and vintage models, giving them a perfect finish & adding a unique style and charm !!! Each stand have been carefully and reliably made using HIGH-QUALITY materials so that each speaker placed on them is SAFE and SECURE !!! As you can see on attached High Resolution Images clearly showing our stands with the different types of speakers placed on them, You can simply say THEY LOOK ABSOLUTELY STUNNING !!! VERY CLASSY AND STYLISH !!! Below you can find some of the KEY FACTS... ADJUSTABLE FEETS - Even if the floor is uneven, you will be able to properly level the stands without any problems. MAXIMUM WEIGHT - Our stands are stable and strong so you can put even larger and heavier speakers on them, up to 45 kg each!!! FULLY ASSEMBLED - Ready to be placed and do not require any assembly from your end. If there is a need to tighten any of the screws, the kit also includes a suitable tool so you can easily do it yourself. AVAILABLE COLOURS - Our stands are currently available in two colours. Glossy WHITE and Glossy BLACK. PLEASE NOTE - THIS LISTING IS FOR A PAIR OF BLACK STANDS ONLY !!! ANY SPEAKERS & OTHER ACCESSORIES VISIBLE ON SOME IMAGES ARE FOR PRODUCT PRESENTATION PURPOSE ONLY & THEYRE NOT INCLUDED IN THIS SALE !!! Dispatched with fully Insured and Tracked 48h Courier. Please feel free if you have any questions and dont forget to check my other auctions with some more fantastic and cool Stuff !!! Many Thanks :)

These stands have been personally designed and made by our team using many years of experience and deep passion for music !!! Our stands are unique and you will not find any similar ones on the current market !!! They will fit perfectly with VARIOUS types of speakers, especially those older and vintage models, giving them a perfect finish & adding a unique style and charm !!! Each stand have been carefully and reliably made using HIGH-QUALITY materials so that each speaker placed on them is SAFE and SECURE !!! As you can see on attached High Resolution Images clearly showing our stands with the different types of speakers placed on them, You can simply say THEY LOOK ABSOLUTELY STUNNING !!! VERY CLASSY AND STYLISH !!! Below you can find some of the KEY FACTS... ADJUSTABLE FEETS - Even if the floor is uneven, you will be able to properly level the stands without any problems. MAXIMUM WEIGHT - Our stands are stable and strong so you can put even larger and heavier speakers on them, up to 45 kg each!!! FULLY ASSEMBLED - Ready to be placed and do not require any assembly from your end. If there is a need to tighten any of the screws, the kit also includes a suitable tool so you can easily do it yourself. AVAILABLE COLOURS - Our stands are currently available in two colours. Glossy WHITE and Glossy BLACK. PLEASE NOTE - THIS LISTING IS FOR A PAIR OF WHITE STANDS ONLY !!! ANY SPEAKERS & OTHER ACCESSORIES VISIBLE ON SOME IMAGES ARE FOR PRODUCT PRESENTATION PURPOSE ONLY & THEYRE NOT INCLUDED IN THIS SALE !!! Dispatched with fully Insured and Tracked 48h Courier. Please feel free if you have any questions and dont forget to check my other auctions with some more fantastic and cool Stuff !!! Many Thanks :)

Harbeth Acoustics LS3/5A BBC Studio Monitor Speakers. Highly sought after Bi-wirable version. Sound amazing as you would expect. These belonged to BBC Wales Studios as spares so never used but on standby if required sadly this branch of BBC no longer fully operational however these are now available to a discerning audiophile. Thanks for looking.

Weare offering this Pair of Speaker GrillsAllison FourSide Tweeter Grills / CoversThese grills are in very good, used condition.We have other listins for Grill Covers. Please view our pictures. The pictures are part of the description of this item.

Leema Acoustics Essentials MM/MC Phono Stage - Silver. EXCELLENT CONDITION LITTLE USE COST NEW 600 FULL COMPENSATION WILL BE PAID

Leema Acoustics Essentials MM/MC Phono Stage - Silver. EXCELLENT CONDITION LITTLE USE COST NEW 600

Another rarity from stereo-exchange!! - Here is a rare Micro Acoustics R-382 stylus for their 382 Electret cartridge!! This is New Old stock in Pfanstiehl packaging as shown- and was opened only for the pics. It features a very fine, nude 0.2 x 0.7 mil diamond tip!! This will also fit the other Series II cartridges such as the 309, 3002, 630mp, and 830CSA. Shipping is $9.00 within the USA via USPS Insured Priority Mail with Signature Confirmation. Shipments outside the USA must be via USPS Priority Mail as cheaper services cannot be insured. Overseas buyers responsible for all duties and taxes. Please see our other listings for more phono and other electronics items as we are happy to combine shipping costs for multiple purchases!! NOTE: These are very delicate. Returns will not be accepted under any circumstances if this is damaged in any way due to carelessness when installing, aligning, during playback, or by unruly kids or pets.

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts 008487Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundDescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?https://flatlineacoustics.com/product/ls-650-ic/

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundDescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?https://flatlineacoustics.com/product/ls-650-ic/

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

Flatline Acoustics USA Ceiling Speaker LS-650-IC 4 - 8 Ohms 125 Watts Good condition, fully working, was part of an Atmos setup, great soundhttps://flatlineacoustics.com/product/ls-650-ic/DescriptionWoofer : 6.5? 2 way, PP cone with mica, rubber surround, 22 oz magnet, 1? voice coil, vented pole pieceTweeter : 1? silk dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersionX-over : FR4 PCB board, 12dB woofer section, 12dB tweeter sectionPolymide auto protective reset switch for tweeterGold plated terminal posts will accept 14AWG wireFrequency response : 48Hz-22KHzSensitivity : 88dBRecommended amplifier power : 10-125 wattsImpedance : 4ohm/8ohm selectable on PCBCut out size : 7.87?/200mmdepth : 4.09?

AKG Acoustics C 580-1 Kondensator Schwanenhalsmikrofon # Mikrofon. Unbenutzter Artikel in Originalverpackung. Die Fotos sind Teil der Artikelbeschreibung. Farbe kann durch Lichtverhältnisse und Bildschirmeinstellung variieren. Privatverkauf: Der Verkauf erfolgt unter Ausschluss jeglicher Gewähr­leistung. Der Käufer erklärt sich beim Kauf mit dieser Regelung einverstanden.Das neue EU-Recht schreibt vor, dass nun auch bei Privat verkauften Artikeln eine Garantie von einem Jahr und Umtauschrecht gegeben werden muss, es sei denn, dass dies ausdrücklich ausgeschlossen wird. Der hier angebotene Artikel wird von mir privat verkauft. Die Angaben in dieser Artikel-Beschreibung wurden von mir wahrheitsgemäß und nach bestem Wissen und Gewissen gemacht. Ich übernehme keine Garantie. Ferner sind Sie im Gegensatz zum neuen Verbraucherschutzgesetz als Käufer damit einverstanden, keinen Gebrauch vom neuen Garantie-Gesetz zu machen. Mit Ihrer Gebotsabgabe/ Kauf bestätigen Sie, dass Sie auf den Umtausch, Reklamationen oder Rückgabe ausdrücklich verzichten. Sollte einmal etwas nicht in Ordnung sein – kontaktieren Sie mich bitte. Wir finden eine Lösung.

Falcon Acoustics LS3/5a GOLD Badge version - walnut finish pair. Very hi quality speakers, full packing.The Falcon Acoustics Classic 15 ohm LS3/5a, fully Licenced by the BBC, and hand-assembled by Falcon in Oxford England. It is the only LS3/5a in production that faithfully replicates the original BBC design published in October 1976.The result of nearly 2 years development, the Falcon LS3/5a is a true British-made classic 15 ohm LS3/5a. It continues the long tradition of the genuine British BBC-Licenced LS3/5a stretching back to the 1960’s.The drive units are the renowned Falcon B110, and the Falcon T27 tweeter, both designed by Malcolm Jones, the original designer of the KEF B110 and KEF T27 that were specified in the original 15 ohm LS3/5a version designed by the BBC. Both drive units are handmade in the UK to ensure the highest quality, grading and consistency, and are identical to the original LS3/5a drive units. They are unique to Falcon.The matched 15 ohm BBC Specification FL6/23 filter networks are made exclusively by Falcon in the original transformer-style to BBC Specification and contain inductors specially made in Britain for Falcon to the original specification. The cabinets are hand made from specially selected graded Baltic Ply, and use selected grade Beech fillets. They are British made to BBC Specification, and are available in a variety of natural wood veneers (see below for pictures of current veneers) with a Tygan Cloth front grille. Falcon Acoustics LS3/5a’s are sold in matched pairs only, and are supplied with an Instruction Manual, Individually Numbered Certificate of Authenticity. More info there - https://www.falconloudspeakers.co.uk/services#SPECIFICATIONS We are company can wrote invoice - VAT. Post to all Worldwide: Europe around 50-100Eur, other 150-300Euro.

Harbeth Acoustics LS3/5A BBC Studio Monitor Speakers. Highly sought after Bi-wirable version. Sound amazing as you would expect. These belonged to BBC Wales Studios as spares so never used but on standby if required sadly this branch of BBC no longer fully operational however these are now available to a discerning audiophile. Thanks for looking.