Klipsch RW-8 Home Theater Subwoofer (Woofer Only) Replacement Speaker, it has been tested and is in good working condition   The complete eBay Selling Solution.

Klipsch RW-5802 II Passive in-wall subwoofer. I purchased this last year for a project that I never started. Box has been opened but item has never been removed as far as I can remember. Local pickup available in Lakeland, FL. Can also arrange for delivery in most of west central & SW FL.

Klipsch RW-8 Home Theater Subwoofer Volume Control    The complete eBay Selling Solution.

Klipsch RW-5802 II Passive in-wall subwoofer Description Up for consideration is a single Klipsch RW-5802 II in-wall speaker This Klipsch system includes an in-wall subwoofer that installs flush in your wall. The subwoofer features two strong-yet-light 8 woofers designed for tight, precise bass. And its special enclosure minimizes sound transfer into adjacent rooms. *two 8  woofers *frequency response 45-140 Hz (±3dB) *MDF baffle *sealed integrated enclosure for maximum installation flexibility *mounting hardware, anti-rattle isolation pads included *paintable bezel and rustproof aluminum grille *cutout: 10-1/8W x 19-1/8H *mounting depth: 3-3/4     Click images to enlarge Images sell! Get Supersized Images & Free Image HostingCreate your brand with Auctivas Customizable Templates. Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva.com. Track Page Views WithAuctivas Counter

KLIPSCH RW 8 RW8 Powered 8 Subwoofer, Front Firing - TESTED WORKS. Condition is Used. Shipped with USPS Ground Advantage.

Elevate your home theater experience with the Klipsch RW-8 subwoofer. This powerful and compact subwoofer boasts a driver size of 8 inches and a maximum RMS power of 125 watts, delivering deep, rich bass to your favorite movies and music. The subwoofer is housed in a sleek black wood material and has a rectangular shape that blends seamlessly into any room. With stereo L/R RCA and banana jack audio inputs, connecting the subwoofer to your audio system is a breeze. The Klipsch RW-8 subwoofer has been used and tested for quality assurance, ensuring that it will perform at its best in your home theater setup. Add this subwoofer to your system and take your audio experience to the next level.

Verkaufe meine Klipsch Standlautsprecher RF15 8ohm 100watt + Subwoofer RW8. Die Lautsprecher sind technisch einwandfrei. Die Gehuse in schwarz Esche Optik haben kleine Gebrauchsspuren. Die Abdeckungen sind an einigen Stellen am Stoff beschdigt. Dies ist ein Privatverkauf!!! Keine Garantie und keine Rcknahme. Kein Versand nur Abholung!

This Klipsch RW8 powered subwoofer is an excellent addition to any home audio system. Its 8 inch driver size and front firing shape deliver powerful bass for a more immersive listening experience. The subwoofer is wired for connectivity and comes in its original box for safe transport. With its brand name, Klipsch, and model number, RW8, this subwoofer is a great choice for anyone looking to enhance their home audio setup. Whether you're watching movies or listening to music, this subwoofer will provide the high-quality sound you need.

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Klipsch RW-8 120V Black Powered Home Theater Subwoofer - Used/tested. SPECS AMPLIFIER Class A/B Discrete (w/Switch Mode Power Supply) FTC Rated Power: 125 watts continuous @ <2%THD Dynamic Power*: 270 watts BANDWIDTH 32-120Hz 3dB MAXIMUM OUTPUT 103dB @ 30Hz 1/8 space, 1 meter LOW PASS Continuously variable from 40-120Hz CROSSOVER 24dB/octave slope above 120Hz INPUTS Two high level speaker binding posts, two line level RCA phono jacks, one line level LFE jack OUTPUTS None PHASE Continuously variable from 0-180 degrees DRIVE COMPONENTS One 8 (20.3cm) front-firing Cerametallic cone woofer

Klipsch RW-8 120V Black Powered Home Theater Subwoofer. 30 Subwoofer Cable and extra long power cable Included. Just dont need anymore. 100 operational. DESCRIPTIONBass-reflex powered design, 8 front-firing aluminum cone woofer, 190w Class A/B amplifier, 32Hz-120Hz ±3dB, 29lb.

klipsch rw-8 Subwoofer. Condition is Used.

KLIPSCH RW 8 RW8 Powered 8 Subwoofer, Front Firing - TESTED WORKS. Subwoofer is in good condition some scratches chips here and there but otherwise it’s in good working condition.Free economy shipping

Klipsch RW-8 120V Black Powered Home Theater Subwoofer - Used/tested. SPECS AMPLIFIER Class A/B Discrete (w/Switch Mode Power Supply) FTC Rated Power: 125 watts continuous @ <2%THD Dynamic Power*: 270 watts BANDWIDTH 32-120Hz 3dB MAXIMUM OUTPUT 103dB @ 30Hz 1/8 space, 1 meter LOW PASS Continuously variable from 40-120Hz CROSSOVER 24dB/octave slope above 120Hz INPUTS Two high level speaker binding posts, two line level RCA phono jacks, one line level LFE jack OUTPUTS None PHASE Continuously variable from 0-180 degrees DRIVE COMPONENTS One 8 (20.3cm) front-firing Cerametallic cone woofer

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Must be used with axiim transmitter, can be purchased from me separately if required. Non returnable if you are using something else. Happy to demonstrate them if local. Collection also possible. Grab a bargain as these are 800+ speakers

Klipsch RW-8 120V Black Powered Home Theater Subwoofer Tested Works Well Showing normal signs of wear Plastic Grill has a few broken spots - not noticeable from front If you have any questions please let me know ShippingBy default, we use USPS. A carrier will be chosen basedupon customer location, shipping price, and seller convenience. If you have special delivery instructions, please let us know prior to purchasing to make arrangements. INTERNATIONAL BUYERS SHIPPING IS CALCULATED BY EBAY GLOBAL SHIPPING SERVICE AND CHARGED BY THEMPLEASE NOTE: IMPORT DUTIES, TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYERS RESPONSIBILITY.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Klipsch RW-51M WISA powered monitor speakers. These are immaculate, in original box etc. Grab a bargain!

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Good used condition but does have scratches and marks (view pics)Good working condition Check my feedback and buy with confidence Need it quick? Ask me about fast shipping from CanadaNeed it overseas? I can ship Internationally to most locations with UPS Worldwide Expedited (Ask me for a quote)$55 shipping USA $45 Shipping Canada Shipping includes tracking and insurance

Klipsch RW-5802 Passive Subwoofer.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.