Brand new - open box never used Klipsch RW-34c Wireless Center Channel. Amazing sound. No wires. As part of the Klipsch Reference Wireless Series, the Klipsch RW-34C Wireless Center Channel ensures you'll never miss a word of the dialogue of your favorite movies and TV. Features: TRUE ENTERTAINMENT: The legendary, detailed and dynamic sound you’ve come to expect from Klipsch TRUE WIRELESS: Seamlessly connect this center channel speaker to your Reference Wireless system by pairing a WiSA compatible 2019 LG OLED or NanoCell TV, Windows 10 or Mac O/S 10 device, or Xbox One with the Axiim Link Wireless Home Theater Transmitter TRUE SIMPLICITY: Get uncompromising, wireless sound that outperforms any sound bar on the market today. With an easy-to-setup system, start with a stereo, two-channel system and grow up to a complete 7.1 home theater system

Brand new - open box never used Klipsch RW-34c Wireless Center Channel. Amazing sound. No wires. As part of the Klipsch Reference Wireless Series, the Klipsch RW-34C Wireless Center Channel ensures you'll never miss a word of the dialogue of your favorite movies and TV. Features: TRUE ENTERTAINMENT: The legendary, detailed and dynamic sound you’ve come to expect from Klipsch TRUE WIRELESS: Seamlessly connect this center channel speaker to your Reference Wireless system by pairing a WiSA compatible 2019 LG OLED or NanoCell TV, Windows 10 or Mac O/S 10 device, or Xbox One with the Axiim Link Wireless Home Theater Transmitter TRUE SIMPLICITY: Get uncompromising, wireless sound that outperforms any sound bar on the market today. With an easy-to-setup system, start with a stereo, two-channel system and grow up to a complete 7.1 home theater system

Brand new - open box never used Klipsch RW-34c Wireless Center Channel. Amazing sound. No wires. As part of the Klipsch Reference Wireless Series, the Klipsch RW-34C Wireless Center Channel ensures you'll never miss a word of the dialogue of your favorite movies and TV. Features: TRUE ENTERTAINMENT: The legendary, detailed and dynamic sound you’ve come to expect from Klipsch TRUE WIRELESS: Seamlessly connect this center channel speaker to your Reference Wireless system by pairing a WiSA compatible 2019 LG OLED or NanoCell TV, Windows 10 or Mac O/S 10 device, or Xbox One with the Axiim Link Wireless Home Theater Transmitter TRUE SIMPLICITY: Get uncompromising, wireless sound that outperforms any sound bar on the market today. With an easy-to-setup system, start with a stereo, two-channel system and grow up to a complete 7.1 home theater system

Brand new - open box never used Klipsch RW-34c Wireless Center Channel. Amazing sound. No wires. As part of the Klipsch Reference Wireless Series, the Klipsch RW-34C Wireless Center Channel ensures you'll never miss a word of the dialogue of your favorite movies and TV. Features: TRUE ENTERTAINMENT: The legendary, detailed and dynamic sound you’ve come to expect from Klipsch TRUE WIRELESS: Seamlessly connect this center channel speaker to your Reference Wireless system by pairing a WiSA compatible 2019 LG OLED or NanoCell TV, Windows 10 or Mac O/S 10 device, or Xbox One with the Axiim Link Wireless Home Theater Transmitter TRUE SIMPLICITY: Get uncompromising, wireless sound that outperforms any sound bar on the market today. With an easy-to-setup system, start with a stereo, two-channel system and grow up to a complete 7.1 home theater system

4 original Quality Klipsch RW-10D Bash Subwoofer feet with screws. They are substantial and in nice condition. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)

Klipsch RW-34C Center Channel Wireless Speaker - Detailed - Dynamic Sound - Seamless Connect - Wireless System - Easy Set-up - Two-Channel System - 7.1 home Theater System - (Black) An open box item that is a return and may have a rough box but has been inspected and is in great condition that comes with the manufacturer warranty.

4 original Quality Klipsch RW-10D Bash Subwoofer feet with screws. They are substantial and in nice condition. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)

Klipsch Foot Feet Stands set of 4 from RW-12 120V Subwoofer Cosmetically: There are light scuffing, scratches and normal wear but overall great condition. Please see the detailed pictures to judge for yourself.You wont be disappointed. *THIS ITEM IS PRE-OWNED ~ Being Sold ~ As it is described and pictured ~ INCLUDED: All items pictured in this listing. NOT INCLUDED: Any related items not pictured in this listing. The Item in this listing has been thoroughly cleaned so you can feel comfortable just opening and using on arrival. Its already bagged and packed with padding to prevent any dust or damage in storage. If you have any questions, concerns or if extra photos are needed please feel free to contact us, before any bids, offers or purchases are made. We will respond as quickly as possible. All Items are METICULOUSLY packed to insure you receive it in the exact condition seen in the pictures. ??SUPER FAST SHIPPING?? ?????????????????????????????????? ????????????????????????????????????????????????WE ALWAYS STRIVE TO SHIP THE SAME OR NEXT BUSINESS DAY Thank you for looking and have an AWESOME DAY!

Enhance your home audio experience with the Klipsch RW-12D subwoofer driver speaker. This top-of-the-line subwoofer boasts a 12-inch copper cone and 4 ohm impedance, delivering powerful and clear bass to any music or movie. Its wired connectivity ensures a stable and reliable connection for uninterrupted listening pleasure. The Klipsch RW-12D is a must-have for any home audio enthusiast looking to elevate their sound system. See pictures for details. Free shipping

4 Klipsch RW-10D Subwoofer Original Feet with Screws, Nice Quality, Substantial.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

Good used original Klipsch RW-12B 12 inch 4 ohm subwoofer driver speaker.Tested, working perfectly.Copper clad cone (pretty!)12 1/4 inch diameter frame4 1/2 inches hole to hole on 8 hole bolt circle7 inches deep setback

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.

KLIPSCH RSA-500 SUBWOOFER AMP 300W @ 8OHM 500W @4OHM. Tested and working on all inputs and outputs on a klipsch KSW15. All switches work. Both front knobs work. Basically a brand new unit. Was installed and rarely used. Cons: Power LED is not working. Power to LED is working. Light bulb appears to have died. Can replace before shipping if you like at your cost of bulb. One foot seems to have broken off. Can glue on or replace at your preference. Replaced at your cost. The rack mount ears are not included. I have a set I can add for a small fee. Guaranteed not DOA. Sold as is, no warranty. Please ask all questions before bidding. Will ship within 72hrs of payment or 72hours after any replacement parts are added. Ships from Maui, Hawaii. Appx 22lbs from zip 96753 in a box 20x20x12 International shipping ONLY through eBay international shipping service. Please message before bidding. While the RSA-500 subwoofer amplifier was primarily designed for use with the RW-5802 and RW-5101-C in-wall subwoofers, it also features custom settings for the AW-800-SW outdoor subwoofer. Features: EQ switch for use with different subwoofers Selectable signal-sensing or voltage triggered auto-on/off circuit 300 watts continuous into 8 ohms or 500 watts continuous into 4 ohms Line and speaker level inputs This high-powered device will drive up to two of any of these subwoofer modules and delivers 300 watts into an 8-ohm load (one subwoofer module) and 500 watts into a 4-ohm load (two subwoofer modules). It also comes with rack ears for fast and secure placement into any standard 19-inch rack. To keep end users from inadvertently tampering with performance levels the majority of the RSA-500’s controls are housed on its rear panel. The fuse is also included on the back for quick and easy replacement. A detachable IEC power cord allows for the simple removal and reinstallation of the entire amplifier unit. The RSA-500 was also designed to “play nice” by offering standard input/output connectivity that will support any type of system. SPECIFICATIONS: FREQUENCY RESPONSE 20Hz-1kHz ± 3dB ENCLOSURE TYPE Use only with RW-5802, RW-5101-C and AW-800-SW subwoofer enclosures (either one or two) AMPLIFIER BASH Hybrid AMPLIFIER POWERFTC Rated Power: 300W into 8 ohms, 500W into 4 ohms, 20Hz-1kHz @ <1.5% THD Dynamic Power: 875W into 8 ohms, AUTO POWER ON 2 second ON delay, 15 minute OFF delay LOW PASS CROSSOVER INPUTS Continuously variable from 40-120Hz, 2 Gold-plated speaker binding posts, 2 Gold-plated RCA phono jacks plus single LFE OUTPUTS 2 Gold-plated unfiltered RCA phono jacks plus single LFE PHASE DIMENSIONS Switchable between 0 and 180 degrees 3.5 (8.9cm) H x 17 (43.2cm) W x 12.6 (32cm) D (without rack ears) WEIGHT 18 lbs. (8.2kg) FINISH Black anodized aluminum face plate VOLTAGE 110/120 VAC 60Hz FEATURES Selectable EQ, Speaker Level In, Low voltage trigger, rack ears included Dynamic power indicates the actual power this amplifier will deliver to the woofer under normal operating conditions. While the FTC power rating indicates power available on a continuous, long-term basis, subwoofers do not rely on that type of power. Instead, the amplifier is called upon to deliver large, short-term peaks of power to be able to support the wide dynamics required by today’s digital music and movie formats. In addition to the required FTC power rating, we’ve provided the dynamic power rating as a better indication of the product’s true performance.