Kenwood TS-2000X HF/6M/2M/70CM/1.2ghz All band/All mode transceiver in Beautiful shape working as it should. Face and cabinet are in EXCELLENT shape! LATE serial number B4BXXXXXX! Comes with Manual on CD, Original Kenwood hand mic (up down buttons dont work, typical of this hand mic) , and power cord. Normal 0 Offers the following features that you could be missing on your current All Band / All Mode transceivers: True IF-stage DSP with 100% digital filtering on the main band.AF DSP on the sub band.Built-in automatic antenna tuner for HF and 6 meters.Satellite operation with automatic tracking.Dual Receive with many combinations.100 watts HF / 6 meters / 2 meters.50 watts on 430-450 Mhz.10 watts on 1.2 Ghz.Electronic keyer with 3 memories.Cross-band repeat.CTCSS encode/decode and DCS.Built-in TCXO.Worlds first HF backlit front key panel.Smart metallic-gray design with large LCD display.5 + 1 antenna ports.Transverter ready.9-pin DB connector for easy PC interface.Built-in TNC (1200/9600bps).DX packet cluster monitoring with direct go-to function for HF and 6 meters opening.CW auto-tune, and much, much more. Since it is equipped with independent 144/440Mhz sub-band reception (AM/FM modes only), simultaneous reception on two bands is possible: HF by V/U, V by V, U by U and V by U. A typical application might be to gather local information on 144/440 Mhz at the same time as using HF for long-range operations. The transceiver is equipped with an IF DSP for main-band use (AF DSP for sub bands). The combination of digital IF filters and IF DSP slope tuning results in enhanced versatility. With digital IF AGC (controlling IF gain via DSP), it is possible to set the time constant separately for each mode. Also, the IF auto-notch function makes it easy to remove interference while automatically tracking with DSP-based adaptive filtering. Additionally, the AF stage beat canceller is capable of eliminating multiple beats at the same time; manual operation (manual notch for dealing with a single wave) is also permitted, which is convenient for CW use. For noise reduction there is a choice of NR1 (line enhancer, ideal for SSB), and Kenwoods original NR2 (SPAC), which is popular among CW operators. The operator can make use of CW auto-tuning, while the availability of a DSP for SSB/CW/FSK/AM variable demodulation puts this transceiver a cut above analog equipment. Buyer pays shipping for a well packed box. NOTE: Due to the value it will need a signature when delivered. Buy from me with confidence as I have excellent feedback. . PLEASE NOTE: EBAY HAS NOW STARTED TO ADD SALES TAX ON INVOICES DEPENDING ON WHAT STATE YOU ARE IN, YOU WILL SEE IF THERE IS ANY SALES TAX YOU WILL BE CHARGED ON THE INVOICE BEFORE YOU PAY IT SO PLEASE CHECK. THIS HAS NOTHING TO DO WITH ANY SELLER (Evey seller now has this added if it applies to a state that Ebay charges sales tax on). AGAIN, NO SELLER HAS ANY CONTROL OVER THIS AND EBAY COLLECTS THE SALES TAX FROM THE PAYPAL PAYMENT BEFORE THE PAYMENT ACTUALLY REACHES A SELLER SO WE NEVER SEE IT.

Motorola 1 XTS5000r,1 xts5000,5 ht1000,10 mts2000, Kenwood 1 tk3173, 1 tk3160,7 tk373g no batteries. Untested sold as is

Kenwood KA-2000, Supreme 1 magazine ad. From the March 1968 issue of Audio Magazine. It is an original. In good condition. Safely packed, we do include a stiff cardboard insert, the insert and ad wrapped with saran wrap and a Please Do Not Bend sticker on the envelope to help preserve the integrity of the ad.

Motorola 1 XTS5000r,1 xts5000,5 ht1000,10 mts2000, Kenwood 1 tk3173, 1 tk3160,7 tk373g no batteries. Untested sold as is

You are looking at a Kenwood TS 2000 HF VHF UHF Transceiver.I will even trade this for Elecraft K3 gear.Just hook up to your power supply and antennas,and you are on the air.Here is what you get.Great working TS2000 HF UHF VHF Tranceiver .. 6-160 meters plus 2m,440.This is a tested and good working station.To get all these bands in my own station,I have to use 2 radios at a cost of much more.Please see pictures for more details. Please email with any questions.Also on QRZ.Larry k6ro

KENWOOD SW-2000 SWR / WATTMETER with SWC-3 COUPLER. Please see pictures for condition, working when disconnected. Comes with unit only, all switches operate properly.

6pins D/C Power Cord Cable For Kenwood Icom Radio IC-706 TS-570/TS-2000 AlincoDESCRIPTION Detail: *6pin Radio Power Cable is compatible with for Kenwood TS-570 TS-2000, for Icom IC-706, for Alinco DX-70T, etc. *With high performance, easy to use. *Item Condition: Brand New *Color:Black+Red (As Pictures Show) *Cable length:1m/3.3ft(Approx.) *Input voltage:12~14V *Wire type:12AWG wire *Fuse:30Amp fuse Fitment: for Kenwood: TS-50s, TS-60s, TS-140, TS-440, TS-450, TS-570, T 000, etc. for Icom: IC-706 IC-718 IC-746 IC-756, etc. for Alinco: DX-70T DX-70TH DX-77, etc. Package Contents: 1*Radio Power Cable Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.POLICESShippingPaymentWARRANTY We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to Australia; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via Ask seller a question . We will reply your email within 24 working hours.

Nice Kenwood R-2000 MW SW Shortwave Desktop Radio AM FM CW SSB Receiver Ham Work Great Very Good Condition Look Like New Check all Photos What You See is Exactly What You Get !!! OFFER APPLIES TO THE CONTINENTAL UNITED STATES ONLY. RESIDENTS OF ALASKA, HAWAII AND PUERTO RICO WILL NEED TO EMAIL US FOR AN ACCURATE SHIPPING QUOTE We normally ship your item within 24 hours after your payment is clear. We use FedEx ground or USPS to ship your Items.Thanks For Looking.

Solid State Trio (Kenwood) Stereo Amplifier KA-2000A. PAT tested but not functional tested. Donated to a charity shop. See images, a few knocks and scratches.

-Description-Basically, what you see in the pictures is all there is.The item is used, so there are some signs of use overall. We have only checked that the main unit and the microphone are working, and that the buttons and knobs are easy to operate. If you have any questions or concerns, please do not hesitate to contact us! -Shipping-Shipping Fedex or Japan PostWe usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days shipment. -International Buyers Please Note-Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

-Description-1.9 to 50MHz(100W) 144 to 430MHz(50W) Transmit/receive operation check only. Instruction manual, Microphone MD-100 (The bottom of the main unit is missing.) Circular 8-pin adonis wiring. Other manufacturers radios can be used with conversion cord), and speaker cord SP-23 are included. If you have any questions or concerns, please do not hesitate to contact us! -Shipping-Shipping Fedex or Japan PostWe usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days shipment. -International Buyers Please Note-Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

DescriptionThere are stains, scuffs and scratches.Kenwood TS-2000S with panel burnout, working (1.9-145MHz 100W)430MHz with difficulty (00.1W)TM-461S (40W unit) included.1.9 to 430MHz transmission and reception are good.*Please note that it transmits on non-amateur bands as well. Accessories Users manual (copy)DC cable 1 of 2 microphones without U/D button Please Note:The voltage and plug shape of home appliances and digital instruments are different in each country.Japanese products are basically 100V, and if you do not use a transformer or something similar, it may cause the fuse to blow and other problems.Please be sure to check before considering. If you have any question or concern, please do not hesitate to contact me : ) ShippingStandard Shipping ?Japan Post , FedEx , DHL?We usually ship out your order within 5-7 working days after receiving your payment.The package will arrive about 3 - 10 days after shipment.Pack carefully : ) International Buyers - Please Note?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Kenwood R 2000 Communications Receiver PLEASE READ. *Was part of a persons collections of different types of equipment similar to this. This receiver is in great shape for its age. The exterior has only a few scratches and marks, and comes as seen as in the photos. This unit is not fully tested. It turns on the reason for not fully testing this receiver is because I am unsure on how to use this type of equipment so I’ll be selling AS IS. *NO box, antenna, cords, manuals just the receiver will come in your purchase. * PLEASE LOOK IN THE PHOTOS AND ACCESS THE CONDITION. *NO RETURNS will be allowed due to not reading or looking through the listing fully. *AGAIN BEING SOLD AS IS FOR PARTS OR REPAIR. Thanks

NEW 8 pin microphone extension cable for CB and Ham radio. 16 long coiled mic cable extends to 48. All 8 pins are wired direct for continuity, offering a straight 8 pin extension. Works with standard 8 pin microphones common on Yaesu, Kenwood, Icom and other transceivers. Compatible microphone: for MD-200, MD-100AX, MD-100 for MD-1B8, MD-1C8, MD-2H8 for YM-38, YM-37, YM-36, YM-35, YM-34 for YM-48, YM-47, YM-40, YM-49, YM-50 for MH-1A3B, MH-1B8, MH-10E8, MH-10F8, for MH-14A8, MH-14B8, MH-14D8 for MH-15C8, MH-15D8 for MH-26, MH-31, MH-31B8, MH-36D8 for FT-747GX, FT-757GX, FT-767GX for FT-840, FT-847, FT-890 for FT-920, FT-950, FT-980, FT-990 for FT-1000, FT-1000D, FT-1000MP MKV, FT-2000 for FT-736, FT-650, FT-655 for FT-480R, FT-780R, FT-77, FT102 for FTDX-5000, FTDX-9000 other models use 8 pin round audio plug Features: Connector: round 8 pin Male & 8pin Female Cord Length: approx 6 when extend Package included: 1 x extension adaptor cable

Here is a Kenwood TS-B2000 HF transceiver in excellent cosmetic condition. This is a radio needs the Kenwood ARCP-2000 program which is included for operation....This is from an estate and was being used on an older computer using windows 95....The cable is included which has the 2 db9 female connectors. Im not sure if this will work on the newer computers using windows 11 which I have. So it has not been tested.....It comes with the original manual and schematics, original Kenwood dc cable, Kenwood hand microphone and din connectors and spare fuse. ....I plugged it into a 12 volt dc supply and the red light power light came on.... If you have any questions email me before you bid...This will be shipped FedEx only and payment made no later than 48 hours after the close of the auction or it will be offered to the second highest bidder. I will ship outside of the US using EBays Global program only...That is the only way I will ship outside of the US...If your country is not on the Global program, I will delete your bid..........................................................................................................................

You are looking at a Kenwood TS 2000 HF VHF UHF Transceiver.I will even trade this for Elecraft K3 gear.Just hook up to your power supply and antennas,and you are on the air.Here is what you get.Great working TS2000 HF UHF VHF Tranceiver .. 6-160 meters plus 2m,440.This is a tested and good working station.To get all these bands in my own station,I have to use 2 radios at a cost of much more.Please see pictures for more details. Please email with any questions.Also on QRZ.Larry k6ro

Used Kenwood SWR and Power meter SW-2000 with SWC-2. Ham Radio About the Listing This is another fine quality used and tested part from mrfixit- new and used electronics in Winslow Maine. Item: SWR/Power MeterCompany: KenwoodConnection Type: UHFDate Code Number: Non foundNOTES: This is a used SWR/Power Meter we got in a purchase of electronics last year. It belonged to a Ham operator. We do not know if it works. It did not come with a power supply. I will include a 12 V 2 amp supply. The only thing we have done is plugged it in and saw the meter lights, light up. We do not have any ham transmission equipment nor a dummy load to test it out. It does come with a Kenwood SWC-2 Antenna coupling module. Good for 140-450MHz. Max power of 100 Watts(AM/FM), 150W(CW) or 200W (SSB). It has an impedance of 50-52 ohms for coupling. As such we are listing it as For Parts however it may be a perfectly good working unit. SHIPPING: Please read details below. Got question? Feel free to ask us and make sure to review our feedback. Thanks for stopping by mrfixit- new and used electronics. Please Take a moment and check out my other great listings and auctions. About mrfixit- electronic sales. We are a two person outfit in central maine with a combine 78 years of experience in component level repair. We hold several degrees and certifications. We have also been warrantee techs in the past for Fender, Ampeg, Audio Centron, Crete, Yamaha, Mackie, Kustom, Peavey, Sharp and Toshiba. We use only the highest quality components in repairs we do, and we test test and test some more each product we repair. On average we allow units to run continuously for several hours to several days to make sure they will work as described and to spec. We are absolutely thorough about making sure nothing leaves our shop substandard. We will state in each auction we list weather we worked on the unit we are selling and we will disclose what we worked on. SHIPPING We package everything in card board boxes. We make sure there is at least 3 inches of space between the product and the edge of the box. We make sure the fill material is of quality and will protect your item from poor shipping practices. In large heavier items over 20 pounds we double box the item. So shipping may appear high. These are the reasons why. We charge exact shipping. We do not profit. So if the postal carrier you choose charges us $x than we charge you $x. No gimmicks or tricks here. We have been selling on ebay for years and make sure to read our feedback to see the types of items we sell and see our happy customers. Furthermore, on shipping quotes from ebay. In the near 25 years we have been doing this on ebay, not once has ebays shipping calculator ever been right. It has always been consistently higher than the actual cost. This is why we will always reimburse any unused shipping fees to you. Some of our customers have noted this in our feedback. What we will not do for you.Under size our packaging so you can save a buck and chance having the item you buy from us potentially damaged in transport to you. This will save you time and hassle and it persevere our reputation of being an outstanding electronics and parts company. We will also not ship via FedEx ever. So please dont ask. Even if you provide a prepaid shipping label. FedEx has been responsible for personal property damage to our business and have the worst record locally of care of package delivery to our business. What we will do for you.Make sure your item is nearly bullet proof....well maybe not bullet proof but certainly disgruntled postal or courier proof. We will combine shipping on items if it make sense to do so. Example: If you bought 4 vacuum tubes from us yes we will combine, but if you bought 2 large stage speaker enclosures then no. We wont combine as it would exceed limits of UPS or other couriers. Local pickup? We will allow for local pick up if you email us in advance. Conclusion We have been in business since 1970. Since 1999 on ebay. We will try to do everything in our power to give you a good experience here on ebay. Good luck and we thank you for your business.

INRAD #99 400 Hz CW filter Kenwood TS-830S, R-820, R-2000. 455.7 kHz I-F Used for the Kenwood TS-830S transceiver, and R-820 and R-2000 receivers. Specify radio model and we will have the correct instructions for installation sent with the filter. This filter has been tested with an HP spectrum analyzer and is working properly.

Item Descriptiontype...overhead Connection type: Wired Selling because I havent used it much! , Heavy bass is amazing! There is a feeling of use on the ear cuff Because its not tattered You can still use it! HEADPHONE TYPE: TRADITIONAL HP True Wireless: NOT TRUE WIRELE WIRED WIRELESS: NO WIRELESS color: Fuchsia Cordless Type: Wired Driver Unit: Dynamic Band type type: Headband type Plug type: Stereo mini Headset Attribute: Headphone Headphone type: closed HP Transmission type: Wired analog Folding Shape: Folding #JVC Kenwood #Victor?JVCShippingDomestic Shipping(United States)Expedited shippingFreeShippingInternational ShippingStandard International Flat Rate ShippingShipping Cost : $0.00Europe, Asia, Canada, United Kingdom, China, Mexico, Germany, France, AustraliaStandard International Flat Rate ShippingShipping Cost : $30.00Worldwide, Americas, BrazilPayment eBay Managed PaymentOther Term International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -?do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. If you live in a remote area, there may be additional shipping charges. Thank you for your understanding.

DescriptionWe have 100% stock & Ready to ship!! All accessories are as pictured. HF to 50 MHz ( 100 W) / 144 to 430 MHz ( 50 W) all-mode high power transceiver from Kenwood Corporation .Rated transmission frequency range: HF/ 50MHz / 144MHz / 430MHz , radio wave type: A3J ( SSB), A1 ( CW), A3 ( AM), F1 ( FSK), F2 ( F2 D), F3 ( FM), grounding method: negative ground, antenna impedance: 50 ?, power supply voltage: DC 13.8 V ± 15 %,Transmission output : [SSB/CW/FSK/FM] 1.9 to 28 MHz band/ 100 W, 50 MHz band/ 100 W, 144/430 MHz band/ 50 W,Dimensions: 281 (W) x 107 (H) x 371 (D) mm (including protrusions), weight: about 7.8 kg . Current power is HF ~ 50MHz 100W , 144MHz 50W , 430MHz 50W .The reception sensitivity is OK for each band and other functions are also working.Please check the condition with the photo and video.PaymentVarious credit cards, Apple pay, Google Pay etc.ShippingWe ship by DHL or Fedex. It will be shipped within 1 business day and will arrive in about 3 days on average.Arriving Time is around 3-7 days to arrive.We are fastest delivery seller in Japan.Free Shipping Worldwide!Terms of SaleMoney back guarantee within 60 days if returned by customer.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.

SWC-3 Coupler AND Kenwood SW-2000 2 KW HF/6 meter power/SWR meter HAM Radio Work 100% (watt meter the light is burnt ) USED WITH SCUFFS, SCRATCHES. No smoking environment. No returns or refunds due to parts swappers or poor knowledge, understanding, or incompatibility. Please see all attached photos .Sold as is Please see pictures for details and message me with any questions. All electronics are sold as is for parts or repair. There are no refunds and all sales are final. By buying this item you are agreeing to those terms. This is to protect me from the few dishonest Ebayers who play switch and blame, etc. I state the condition of the item to the best of my ability. Since most of the equipment I sell is used, there are no warranties or guarantees. IF YOU HAVE LESS THEN 2 FEEDBACKS PLEASE DO NOT BID. NO INTERNATIONAL SALES OR SHIPPING.*** NO PUERTO RICO**** NO RETURNS OR REFUNDS DUE TO PEOPLE SWAPPING PARTS. IF YOU BUY THIS........ YOU AGREE TO THESE TERMS.

Gently used me wood amplifier in great shape ready for your bass system. Works great!!