See photos for contents and condition.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

UP FOR SALE, Nice, fully working Kenwood/Trio KP-7700 quartz pll direct drive manual turntable. Details and specs below from web, sorry about the cost of shipping but this thing weighs 39lbs. It won’t be cheap to ship. Private pickup available. Comes with Dust cover, 45 adapter, with proper 15mm overhang line, Kenwood/Trio headshell and N-11 cartridge and stylus. Platter mat is in good condition as well. Turntable is all original and working well, has been throughly tested with speed and quartz lock solid at both 33 1/3 and 45rpm. Recap kits are available on this site if you are interested. A direct drive player with a quartz PLL control circuit. A direct drive system is adopted for the turntable part. The quartz PLL system protects rotational accuracy from steady load (static load with very low frequency component), time drift and temperature drift, and 550 kg ? cm for random transient load with high frequency component.2Steady rotation is maintained by corresponding with moment of inertia of. A double (magnetic and mechanical) integration type 180 slot 3-layer gear is used for the servo detection part of the quartz PLL circuit. In addition, the Speed-Volt (S-V) conversion method is used to convert the rotational speed of the turntable as it is into voltage. This makes the servo response linear and increases the response of the quartz PLL circuit to random and slight load fluctuations. Taking into consideration the effect of the eccentricity and twist of the turntable Center shaft on the sound, a 10 ? Center shaft is adopted, and the turntable shaft is used as a motor shaft as it is. The turntable sheet applies the principle of the Helmholtz resonance box. A small port is provided on the front surface of the table sheet and a resonance space is provided on the back surface of the table sheet to absorb the split vibration generated by the phonograph record. We have also studied the materials used to hold the turntable and the record board together when playing a record in order to improve rotational accuracy. By using MC material for the cabinet, the total weight is increased and vibration of the cabinet due to the reaction of the turntable is suppressed. Dual suspension absorbers are used for the legs. The dual suspension absorber is a unique system with less rigidity in the longitudinal direction and greater rigidity in the lateral direction. This reduces the lateral vibration that occurs when a turntable with a large moment of inertia is driven by a motor with a large starting torque, while at the same time maintaining the elasticity of the absorber from the heavy cabinet. A digital control system using a flip-flop circuit is adopted for the rotation number selector switch and start / stop switch. The power switch is independent of the start / stop selector switch and linked with the power indicator. The quartz lock indicator lights when the turntable rotates normally and the PLL system is locked. The brake part is equipped with a pure electronic brake, which realizes flexible deceleration by suppressing harmful vibration peculiar to mechanical brake. The arm base uses a collet chuck type with large mechanical impedance to suppress resonance. The tone arm adopts TA-71 which is an elastic coupling mass separation type tone arm. The tone arm is affected by two disturbances with different levels and frequencies : arm resonance and first order split resonance. The arm resonance and first order split resonance are out-of-phase vibrations in the main weight section, and it was said that it was impossible to control them simultaneously. The TA-71 was jointly developed by Trio and NHK Technical Research Institute. It cancels the arm resonance and first order split resonance at the same time. It improves sound quality by increasing howling margin and suppressing low-frequency resonance with a high level. For the internal wiring of the tone arm TA-71, the silk-wound Pentlitz wire of ?? structure with less DC impedance, additional capacitance, and additional inductance is used to improve the channel separation. TypeRecord player Turntable Part (PM 700) Drive systemDirect drive Drive motorQuartz PLL Servo 20 Pole 30 Slot DC Motor Turntable33.0 cm aluminum die-cast, 2.6 kg Moment of inertia550 kg / cm2(Including Rubber Sheet) Number of revolutions33 1/3, 45 rpm Wow and flutter0.022% WRMS or less Signal-to-noise ratio62dB(JIS) 74dB(DIN-B) Transient load characteristics0.00030% or Less (400 Hz, 33 1/3, 20g / cm Load) 0.00015% or Less (1 kHz, 33 1/3, 20g ? cm Load) Steady-state load characteristics0% (Needle Pressure Up to 120g) Start-up characteristic1.8 seconds Rotational speed deviationWithin ± 0.002% Time drift0.0002% / h or less Temperature drift0.00002% / ? or less Power supply voltage characteristics0% (± 10 V) Tone Arm Section (TA-71) TypeStatic balance S-shaped pipe arm StructureElastic coupling mass separation system Effective arm length245mm Overhang15mm Tracking error+ 1.8 ° ~ -1.0 ° Needle pressure variable range0 ~ 3.0g (0.1g step) Applicable Cartridge Weight4g ~ 14g (when using the attached shell) Attached shell11g, magnesium alloy die-cast Arm height adjustment6mm Attachment mechanismHeight variable absorber Arm elevation Anti-skating Pure electronic brake Gold-plated audio cord Pwer100 VAC, 50Hz/60Hz Power consumption10W External dimensionsWidth 490x Height 160x Depth 423 mm Weight17.5kg

Turntable Platter & Mat for a Kenwood KD-7X direct-drive full-automatic turntable. Salvaged from a non-working unit. Excellent condition.Please study the photos carefully as they are an important part of this description and feel free to ask questions.

Heute biete ich Ihnen folgendes an: Kenwood KD-700D PLATTENSPIELER + TONSYSTEM / ohne Abdeckhaube technischer Zustand: guter Zustand optischer Zustand: guter Zustand / minimale optische Gebrauchsspuren Falls Sie den oben aufgeführten Artikel ersteigern und diesen persönlich bei mir abholen, so können wir diesen sehr gerne gemeinsam auf den von mir angegebenen Zustand hin überprüfen. Kein Versand an Packstationen oder Paketshops !!! No shipping to USA

The phonograph works with 220V/50Hz For shipping to the USA the turntable is converted on 110V/60Hz Bei Selbstabholung 70,00 € Rabatt! Kenwood KD-700D Originalzustand Mit höhenverstellbaren Gerätefüßen aus Edelstahl, Plattengewicht und System Tonabnehmer: Ortofon Vinyl Master Alpha Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächsthörern Nadeleischub verwenden. Technische Daten Hersteller: KenwoodModell: KD-700 DBaujahre: 1982Hergestellt in: JapanAbmessungen: 490 x 162 x 410 mm (BxHxT)Gewicht: 12 kg (mit Gerätefüßen 14,5 kg) Antrieb: Direct DriveDrehzahl: 33/45 U/minPlattenteller: AlugußBetriebsart: Halbautomatik Das Cinchkabel ist fest am Plattenspieler installiert. Besondere Ausstattungen Quartz gesteuerter DC Servo Motor Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Neue Haube mit Scharnieren: 199 € Cartridge MM System including installation: Ortofon 2M Red (elliptisch) 99 € Ortofon 2M Blue (Diamantschliff): 220 € Ortofon 2M Bronze (Fineline-Diamantschliff): 390 € Ortofon 2M Black (Shibata-Diamantschliff): 599 € Ortofon 2M Black LVB 250 (Shibata-Diamantschliff): 899 €Audio-Technica VM740ML Dual MM (Microlinear-Diamantschliff): 339 € Audio-Technica VM750SH Dual MM (Shibata-Diamantschliff): 439 € Audio-Technica VM760SLC Dual MM (Special-Line-Contact): 699 €Cartridge MC System including installation: Audio-Technica AT33EV (Elliptischer-Diamantschliff): 499 € Audio-Technica AT33PTG/II (Mircolinear-Diamantschliff): 599 € Audio-Technica AT33SA (Shibata-Diamantschliff): 799 €

Turntable Kenwood KD-700D RevisedThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.The phonograph works with 220V/50HzFor shipping to the USA the turntable is converted on 110V/60HzKenwood KD-700D original stateWith height-adjustable device feet made of stainless steel, plate weight and systempickup: Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next needle slot. Technical specifications Manufacturer: KenwoodModel: KD-700DYears of construction: 1982Manufactured in: JapanDimensions: 490 x 162 x 410 mm (WxHxD)Weight: 12 kg (with device feet 14.5 kg)Drive: Direct DriveSpeed: 33/45 rpmTurntable: cast aluminiumOperating mode: semi-automatic The cinch cable is permanently installed on the turntable. Special equipment Quartz controlled DC servo motorThe following parts are as accessoriesuhright riseetcdaily and Not component this auction:the following parts are available like accessories other not included in this auction: Cartridge MM System including installation:Cartridge MC System including installation: For shipping to the USA the turntable is converted on 110V/60Hz With height-adjustable device feet made of stainless steel, plate weight and system With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next needle slot. The cinch cable is permanently installed on the turntable. The following parts are as accessoriesuhright riseetcdaily and Not component this auction: the following parts are available like accessories other not included in this auctionFor shipping to the USA the turntable is converted on 110V/60Hz With height-adjustable device feet made of stainless steel, plate weight and system With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next needle slot. The cinch cable is permanently installed on the turntable. The following parts are as accessoriesuhright riseetcdaily and Not component this auction: the following parts are available like accessories other not included in this auction Herstellernummer nicht zutreffend Marke Kenwood Besonderheiten Direktantrieb EAN Nicht zutreffend Modell KD-700D

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition.

Kenwood KD-74F Fully-Automatic Turntable It has been tested works No dust cover or 45 adapter included Due to its age a complete clean and lubrication is recomended to have the turntable in optimum condition The turntable will have the tone arm retaining screws installed for shipment, they must be removed prior to use Please view the pictures Upon receipt of payment confirmation the item will be shipped. Payment must be received within 7 days of auction close or deal considered void & appropriate action taken. Returns subject to restocking fee. Shipping charge is non-refundable. Thanks for bidding!

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

Turntable Platter & Mat for a Kenwood KD-7X direct-drive full-automatic turntable. Salvaged from a non-working unit. Excellent condition.Please study the photos carefully as they are an important part of this description and feel free to ask questions.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition.

See photos for contents and condition. Please check photos carefully only what you see is included.

See photos for contents and condition.