No International Bidders, No International Shipping, 48 States Only. If you are out of the country and would like to bid, I will be happy to ship to a trusted contact of the winning bidder within the U.S. No P.O. Boxes, APO or FPOs. Winner pays actual shipping, click on the calculator. Hello, you are bidding on a USED, old-school Kenwood Excelon amplifier from 1999. This was taken is trade for some labor and is in decent condition for a 24 year old amplifier. The power screws are gold, shiny and original but slightly rounded on the Phillips but work fine with a flat blade. The speaker screws are NOT the original screws but are the correct thread pitch, only slightly longer than the original. The servo screws are missing as is Ext amp control, but these are only used under certain specific circumstances. Also, the slide control to reveal the LED or the gain and crossover controls is no longer functional. The cover will easily slide manually by hand, but does not move when the button is pushed. Not sure the issue with that. All of these screws and other parts are still available from Pacific Coast Parts. The terminal blocks and RCA are very nice with no sign of damage. All markings are intact . The heatsink is in pretty good shape with just a few scuffs and mounting marks. No dents, rust or folded fins. It is fully tested and functional. Kenwood KAC-X401M Amplifier Type: Single channel Class A/BRMS power: 300 watts x 1 channels @ 4 ohm RMS Power: 600 watts x 1 channels @ 2 ohmTHD @ RMS Power: <0.02%Frequency Response: 5hz - 50khzInput Sensitivity: 0.20 - 5.0V Crossover: Yes, 50hz-200hz LPCrossover Slope: 24db per octaveSpeaker Level Inputs: NoPreamp Output: YesDamping Factor: >200 Signal-to-Noise Ratio: >105 dB Fan Cooled: YesFuse Rating: 4 x 15 Amp (internal) Weight: 15.5 lbs Dimensions: (INCHES): 15 x 10.75 x 2.50 Items were tested at 14.3 volts DC on a variable output DC power supply and supplied with a 1000 hz sine wave pulled from the internet to show AC output. The reason for this is it is tough to show output of a mid and high amp in still pictures. This is only to show AC output which is what drives a speaker in everyday usage. Keep in mind these amps are several years old and show a little age. They not brand new physically, or electrically. I have done my best to take accurate pictures and write a reasonable description. Paypal only, no personal ch3cks, cash, refunds, warranties or scams. Paypal ships immediately. Buyer pays actual shipping. No zero feedback bidders, I will end you. Low feedback bidders contact me BEFORE bidding. Winning bidders email me your address immediately upon completion of auction so I may calculate shipping and facilitate payment. I Only ship to lower 48 states, no international. Check my feedback and bid with confidence. If you have any questions, ASK BEFORE YOU BID. Thank you and good luck. 25x20x7 20

Kenwood KXF-4010 Doppel Kassettendeck- CCRS - Auto Reverse / Mega RAR /defekt Das Gert lsst sich einschalten, nur das Rechte Tapedeck spult, sonst sind beide Decks ohne Funktion. Das Gehuse hat altersbedingte gebrachsspuren. Siehe Bilder. Biete es ausdrcklich als Bastlergert und Teiletrger an ohne Funktionsgarantie Habe noch viele andere Artikel in meinen Auktionen! Versandrabat & Kombiversand sind immer mglich! ...Eine 14 tgige Rcknahme, wird nur akzeptiert bei groen Abweichungen von der Artikelbeschreibung & nicht erwhnten defekten... Der Kufer trgt die kosten fr den Rckversand....

No International Bidders, No International Shipping, 48 States Only. If you are out of the country and would like to bid, I will be happy to ship to a trusted contact of the winning bidder within the U.S. No P.O. Boxes, APO or FPOs. Winner pays actual shipping, click on the calculator. Hello, you are bidding on a USED, old-school Kenwood Excelon amplifier from 1999. This was taken is trade for some labor and is in decent condition for a 24 year old amplifier. The power screws are gold, shiny and original but slightly rounded on the Phillips but work fine with a flat blade. The speaker screws are NOT the original screws but are the correct thread pitch, only slightly longer than the original. The servo screws are missing as is Ext amp control, but these are only used under certain specific circumstances. Also, the slide control to reveal the LED or the gain and crossover controls is no longer functional. The cover will easily slide manually by hand, but does not move when the button is pushed. Not sure the issue with that. All of these screws and other parts are still available from Pacific Coast Parts. The terminal blocks and RCA are very nice with no sign of damage. All markings are intact . The heatsink is in pretty good shape with just a few scuffs and mounting marks. No dents, rust or folded fins. It is fully tested and functional. Kenwood KAC-X401M Amplifier Type: Single channel Class A/BRMS power: 300 watts x 1 channels @ 4 ohm RMS Power: 600 watts x 1 channels @ 2 ohmTHD @ RMS Power: <0.02%Frequency Response: 5hz - 50khzInput Sensitivity: 0.20 - 5.0V Crossover: Yes, 50hz-200hz LPCrossover Slope: 24db per octaveSpeaker Level Inputs: NoPreamp Output: YesDamping Factor: >200 Signal-to-Noise Ratio: >105 dB Fan Cooled: YesFuse Rating: 4 x 15 Amp (internal) Weight: 15.5 lbs Dimensions: (INCHES): 15 x 10.75 x 2.50 Items were tested at 14.3 volts DC on a variable output DC power supply and supplied with a 1000 hz sine wave pulled from the internet to show AC output. The reason for this is it is tough to show output of a mid and high amp in still pictures. This is only to show AC output which is what drives a speaker in everyday usage. Keep in mind these amps are several years old and show a little age. They not brand new physically, or electrically. I have done my best to take accurate pictures and write a reasonable description. Paypal only, no personal ch3cks, cash, refunds, warranties or scams. Paypal ships immediately. Buyer pays actual shipping. No zero feedback bidders, I will end you. Low feedback bidders contact me BEFORE bidding. Winning bidders email me your address immediately upon completion of auction so I may calculate shipping and facilitate payment. I Only ship to lower 48 states, no international. Check my feedback and bid with confidence. If you have any questions, ASK BEFORE YOU BID. Thank you and good luck. 25x20x7 20

AMPLIFICATEUR KENWOOD KA-4010 BON ETAT GENERAL, VENDU TEL QUEL, SANS REVISION PREALABLE NI GARANTIE REMISE EN MAIN PROPRE POSSIBLE A PARIS EXPEDITION COLISSIMO FRANCE : 29€ DESCRIPTION Puissance de sortie : 95 watts par canal dans 4? (stéréo) Réponse en fréquence : 20 Hz à 70 kHz Distorsion harmonique totale : 0,08 % Facteur damortissement : 200 Sensibilité dentrée : 0,2 mV (MC), 2,5 mV (MM), 150 mV (ligne) Rapport signal sur bruit : 67 dB (MC), 86 dB (MM), 106 dB (ligne) Dimensions : 440 x 123 x 345 mm Poids : 8,8 kg Année : 1989

Kenwood KA-4010 Hi-Fi Separate Stereo Amplifier in full working order.Supports 2 sets of speaker outputs.Has an integrated phono stage for connection to a turntable / record deck.In excellent cosmetic condition with one minor cosmetic scratch to the front fascia (please see photos)

AMPLIFICATEUR KENWOOD KA-4010 BON ETAT GENERAL, VENDU TEL QUEL, SANS REVISION PREALABLE NI GARANTIE REMISE EN MAIN PROPRE POSSIBLE A PARIS EXPEDITION COLISSIMO FRANCE : 29€ DESCRIPTION Puissance de sortie : 95 watts par canal dans 4? (stéréo) Réponse en fréquence : 20 Hz à 70 kHz Distorsion harmonique totale : 0,08 % Facteur damortissement : 200 Sensibilité dentrée : 0,2 mV (MC), 2,5 mV (MM), 150 mV (ligne) Rapport signal sur bruit : 67 dB (MC), 86 dB (MM), 106 dB (ligne) Dimensions : 440 x 123 x 345 mm Poids : 8,8 kg Année : 1989

Kenwood Stereo Integrated Amplifier KA-4010 Fully functional.