Heres a vintage 1958 Jensen P12R 12 8? speaker in good working condition. These were used in numerous classic tube amps back in the day so you know they have that special sauce! Taken from a fully functional Hammond/Leslie organ speaker cabinet, this speaker shows some normal cosmetic signs of use throughout (see photos), but it works as it should and is in very good shape overall for its age. Resistance: 7.3? * If you are located outside the US and arent able to place your order, please contact us for a shipping quote.

HERE ARE THREE JENSEN P35-VAH 3 1/2 ALNICO SPEAKERS. THERE IS A PAIR AND A SINGLE. PAIR ARE 8 OHM. SIBGLE IS 16 OHM. ALL ARE IN PERFECT CONDITION. PAIR IS 64 VINTAGE. SINGLE IS 60 VINTAGE. NICE CLEAN SPEAKERS. BUYER PAYS SHIPPING.

Vintage Jensen RP-103S horn tweeter, removed from a tube console. Tweeter has been tested with music & a multi meter. It sounds great. It is in very good working condition for its age. Impedance is 16 ohms & DCR = 15.

Very early Jensen 12 Alnico Coaxial speaker. It is marked Radio Craftsman(which was a vintage USA audio manufacturer), but is clearly made by Jensen with Jensen manufacturing codes and numbers. This is the very early version, probably 1950s, which has a alnico horseshoe magnet for the tweeter driver, large round alnico magnet for the woofer section, tar filled 2 way crossover that is attached to the frame, 16 ohms. The tweeter and woofer section both work, but the woofer cone needs to be reconed/replaced. There are numerous small nicks and scratches, but is in original working condition, but will need repair/reconed/restored. It has the incomparable vintage Jensen design, craftsmanship, attention to detail, parts quality, efficiency and potential that only vintage Jensen speakers can offer. It has lots and lots of potential. It will be sold as described, needs woofer cone repaired/replaced/restored. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)

Metal horn tweeters pair Jensen RP 103B 1962 16 Ohm Alnico magnet Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Crossover Yes 1.0 100 v EM ( Elmenco )Code 220 221 Country USADimension 7 x 3 x 6Frame Silver / Gold top Frequency 2,000 - 15,000 hz Make JensenMagnet Alnico Model RP 103BOhm 16Part # 49X867Stamped Zenith StickerTested 11.8 / 12.3 OhmsYear 1962Watts 20 ( estimated for each tweeter) Up for your consideration is two vintage 1962 Jensen RP-103B metal horn tweeters. https://youtu.be/dM_maKrztX8?si=4FKBcN3x8lTboT-5 to hear them play.. Listing for tweeters pair only. On Horns speaker written: 220-221221 = Manufactured 1962. The tweeters are estimated to be 20 watts each

Hi Everyone! Up for auction is a vintage pair of Jensen alnico horn speakers model RP-103 that are 16 ohm and in nice shape and work fine. No damage or issues and the last two photos show a 14.0 and 14.6 d.c. ohm readings on my ohmmeter across the voice coils. The flange opening is about 7 across by 31/2 tall. Great speakers for your speaker projects! Look at the photos carefully and contact me with your questions. Well packed up the package weighs 7.1 lbs so U.S. shipping will be either usps ground advantage or FedEx ground, I have calculators listed above. International shipping will be priority mail and I have a calculator listed above. Thanks for looking!

Pair of rare Jensen Q8P tweeters. These have been tested and sound excellent. I will double box these in a well padded box for safe shipping. Please let me know if you have any other questions at all.

Offered for your consideration is one (1) vintage Jensen Alnico magnet 3½ inch cone tweeter, USA-made in 1966. As you probably know, Chicago’s Jensen was a prolific speaker company from the 1940’s through the mid 1980’s, and was a leading OEM supplier to the domestic speaker industry in addition to manufacturing their own model speakers. Per the EIA-format date code on the side of the magnet covers, “605”, this tweeters was made by Jensen in the 5th week of 1966. It is identical to their model P35-VAH tweeters, but, being it was ordered by KN Knight for their speakers, it was marked with the OEM part number, AT3I.So, please take a look at my large photos and read the remaining description to decide if this classic Jensen high frequency driver should be yours. This Jensen tweeter is in clean, excellent condition. The thin paper cone is flawless and the voice coil dustcap is perfect as well. Plus, the galvanized steel basket is in great shape with no dings or noteworthy oxidation noted. And, the +/- terminals measure the industry-standard .205”, are marked for polarity, and I’ve left a few inches of input wire soldered to the terminals for the new owner’s convenience in splicing-in to their intended application. For being over 55 years old, this is an exceptionally well-preserved tweeter. Most importantly, it’s been fully tested and sounds terrific—clear and strong with the warm vintage tone that makes Alnico magnet speakers so desirable today. Plus, I tested its DC resistance tested at 5.2?, consistent with a nominal 8 ohm driver rating. Lastly, the basket flange measure 3½” square, it stands roughly 2?” high, and the mounting pattern is the standard EIA-spec for U.S.-made 3½” drivers—2¾” adjacent / 4” diagonal, c-t-c.These is a nice find for someone that need a 3½” cone tweeters as a replacement in their 1960’s-70’s Jensen, Knight/KN, Heath, Magnavox, or many other U.S.-made vintage speakers.As pictured and described, this remarkable Jensen 3½” Alnico magnet tweeter is offered at a competitive price. Terms of Sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $7.95 for very carefully packed shipping by U.S. Postal Service or FedEx with tracking and delivery confirmation. International purchases shipped by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the cabinet label photo is presented only for donor model reference

TWO VINTAGE 1959 JENSEN P12PS 12 INCH 8 OHM ALNICO SPEAKER -FOR PARTS. Speaker Cone C6632 available at speaker exchange only 55 perone

Very early Jensen 12 Alnico Coaxial speaker. It is marked Radio Craftsman(which was a vintage USA audio manufacturer), but is clearly made by Jensen with Jensen manufacturing codes and numbers. This is the very early version, probably 1950s, which has a alnico horseshoe magnet for the tweeter driver, large round alnico magnet for the woofer section, tar filled 2 way crossover that is attached to the frame, 16 ohms. The tweeter and woofer section both work, but the woofer cone needs to be reconed/replaced. There are numerous small nicks and scratches, but is in original working condition, but will need repair/reconed/restored. It has the incomparable vintage Jensen design, craftsmanship, attention to detail, parts quality, efficiency and potential that only vintage Jensen speakers can offer. It has lots and lots of potential. It will be sold as described, needs woofer cone repaired/replaced/restored. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)

Vintage 1960s Jensen Horn Driver and matching metal horn, alnico 16 ohm C6287 horn driver and matching metal C6291 horn, very efficient, excellent sound, incomparable vintage USA Jensen 1960s quality and performance. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)

Offered for your consideration is a vintage Jensen part # P15N 15 inch Alnico magnet wide-range woofer, USA-manufactured in 1949. At first I thought that the EIA source/date code, 220919, indicated that it was made by Jensen (220) in the 19th week of 1959 since permanent magnet Jensen woofers from the late 1940’s aren’t encountered very often. But then I saw “original speaker from 1949 Fender amp works well” handwritten on the box that the woofer was stored in, and the 49xx code on the transformer shelf. So, please have a look at my large photos and read the remaining description to decide if this remarkable Jensen guitar speaker should be yours. This Jensen 15” extended-range woofer is in relatively clean, good condition. The ribbed, seamed original paper cone does have one old puncture repair, as pictured, with some fading, smoothing, and ingrained dust from the years, but it’s still quite sound structurally. Plus, the vented voice coil dustcap is in great shape with no telltale signs of ever being harmed, and the suspension is cone-integral permanent. In addition, the steel basket has no dents but there is some enamel fading, a bit of surface rust, and a number of tiny scuffs and scratches, as pictured. The ivory, four-piece chip paper flange gasket is notably well-preserved. Also, the magnetic pot covering the Alnico V magnet structure has no flaws, but the bell-shaped cover it should have is missing (I do have the original screw for it). And, the terminal spades have been de-soldered. I also placed a tiny red decal next to positive for the new owner’s convenience. Most importantly, this Jensen 15” speaker has been fully tested and sounds great—very strong with clear, fast midrange, ample bass, and highs that approach the audibility limit. Plus, I tested its DC resistance at 7.1?, consistent with a nominal 8 ohm driver rating. Lastly, the basket measures 15?” diameter, it stands 6?” tall, and the four-corner mounting holes are spaced 10?” adjacent / 14?” diagonal apart, c-t-c. This old Jensen was made to last by American craftsmen, and last it certainly has! As pictured and described, this Jensen P15N wide-range 15” guitar speaker is offered at a competitive price. Terms of sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase as there are no cancellations, returns, refunds, or claims considered. Payment is due at checkout by PayPal or other accepted methods. This is a heavy driver, so U.S. mailing addresses will pay $29.95 for very securely packed shipping via U.S. Postal Service, FedEx, or UPS with tracking, delivery confirmation, and insurance. International purchases accepted only from those who are able to pay with PayPal, including shipping by insured U.S Postal Service Global Priority Air Mail—fast but expensive—no exceptions. Thanks for looking! *The woofer will have a piece of rigid cardboard secured over the cone with wire ties at four mounting holes. Then it’ll be wrapped with protective sheets and placed in a sturdy box with shock-absorbent materials. This will ensure the cone, surround, and terminals are fully protected, and that there are no disappointments!

vintage 1940s Jensen JAP-60 15 alnico woofer speaker Click images to enlarge Description vintage 1940s jensen 15 woofer was used in the jap-60 coaxial speaker cosmetically good - needs cleaned - lots of dust works with no voice coil rube but does have a good size crack in the cone suround possibly repairable but might need reconed 8 ohms nominal measures 6.3 ohms dcr massive alnico magnet frequency response 50hz to 4khz weighs 16lbs      Get images that make Supersized seem small.Showcase your items with Auctivas Listing Templates! Attention Sellers - Get Templates Image Hosting, Scheduling at Auctiva.com. Track Page Views WithAuctivas Counter

2 VINTAGE 8 OHMS RATED , 12 INCH ALNICO SPEAKERS , THESE WERE MADE IN CANADA BY RSC/ JENSEN , RSC STANDS FOR ( RADIO SPEAKERS CANADA ) THEY MADE SPEAKERS UNDER LICENSE FROM JENSEN BACK IN THE 1960S ERA . THESE SPEAKERS ARE DESIGNED FOR LOW POWERED TUBE AMPLIFIERS OR SIMILAR TYPES DUE TO NOT KNOWNING USE BY THE BUYER AND AGE THERE IS NO WARRANTY OF ANY KIND . DO NOT USE HIGH POWER AMPS ON THESE SPEAKERS ! THIS WILL CAUSE DAMAGE TO THEM ! PICTURES ARE OF THE ACTUAL SPEAKERS LISTED . DO A GOOGLE SEARCH AND GET ALL OF THE FACTS. ALL SALES ARE AS IS AND FINAL , NO RETURNS OR REFUNDS. DELIVERY TIME TO U.S.A. AND CANADA IS APRX. 15 DAYS .

Description: 1959 JENSEN (P12P?) / B&H 12 Alnico Speaker, 16 ohm, 220936 The speaker is in good vintage condition. It tests 13.8 ohms with a multimeter. The basket and bell are in very good condition. The cone is in good condition with one small spot of damage - very small tear at edge about 1/2 in size. See photos. One of the speaker plugs has bent prongs. Please see all photos. The Bell & Howell part number is 16863. The speaker measures 12-1/8 x 6-1/2 and weighs 6 lbs 7 oz.

Vintage 1954 Jensen P12Q 12 8? alnico speaker in very good working condition. This model has been used in some of the most legendary tube amps of all time, including the holy grail Fender 5E3 tweed Deluxe and many others. This speaker was taken from a functional Hammond/Leslie organ speaker cabinet and is in very good shape for its age, with some normal cosmetic signs of use (see photos). Cone itself is very clean and ready to rock! Resistance: 6.2? * If you are located outside the US and arent able to place your order, please contact us for a shipping quote.

HERE IS A VINTAGE JENSEN 6 ALNICO SPEAKER. MODEL 6J6-V1169. IT IS IN EXCELLENT CONDITION. IT IS A 4 OHM SPEAKER. MFG AND DATE CODE IS 220132. 1951 VINTAGE. PULLED FROM A BELL AND HOWELL PROJECTOR. BUYER PAYS SHIPPING.

Vintage 1961 Jensen P12N 12 8? 50W alnico guitar speaker in very good working condition. This speaker has been used in classic Fender amps for decades including some of their finest Tweed models and it sounds great. Taken from a functional Hammond/Leslie speaker -- some cosmetic signs of use throughout (see photos) but the speaker is in good shape overall and functioning as it should. Resistance: 7.1? * If you are located outside the US and arent able to place your order, please contact us for a shipping quote.

Vintage 1960 Jensen P12Q 12 8? alnico speaker in very good working condition. This model has been used in some of the most legendary tube amps of all time, including the holy grail Fender 5E3 tweed Deluxe and many others. This speaker was taken from a functional Hammond/Leslie organ speaker cabinet and is in very good shape for its age, with some normal cosmetic signs of use (see photos). Cone itself is very clean and ready to rock! Resistance: 6.3? * If you are located outside the US and arent able to place your order, please contact us for a shipping quote.

2 x JENSEN P12PL 12 Vintage Speakers 16 ohm - actual = 11.2 & 12.2 AlNiCo magnet Excellent condition - NO RUST Tested and sound fine Matching Codes 220947 = 1959 See pictures as they are part of the description Will ship by either FedEx or UPS

Selling a vintage Jensen P12PS alnico spekaer. Removed from a Hammond 1x12 reverb extension cabinet that used to house the popular AO35 tube amplifier. The speaker frame has rust, and the paper cone tearing/splitting from paper being brittle that will need repair - or possibly just a recone to a modern cone. Untested, sold as pictured, as-is, no warranty, no returns. I will take extra care when packing to ensure the speaker does not get damaged beyond the current tearing.

A matched pair of vintage alnico speakers with cloth surrounds. The diameter of the metal basket is 8. Speaker codes of 220646 and 220647 identifies them as Jensen speakers made in June and July of 1964. The other no. or identification code printed on the basket is P8 RJF, C8476-2. Tested on meter and got dcr readings of about 5 ohms on each and tested with audio signal and they sound good. The cones and cloth surrounds are good but some might want to re-apply some coating to the cloth surrounds but will leave that to buyer. Only minor issue is that the top surface of the laminated cardboard around the edge of the basket has some spots where the outer layer is missing. On one of them most of the surface cardboard is intact and on the other more is missing than is there. Dont know if these were mounted from the rear with the cardboard pressed against the baffle so you might want to add a little silicone sealer or putty to fill the slight gaps or from the front, in which case the missing cardboard would have no effect whatsoever, only cosmetic. You could just remove the rest of the outer layer so they would all be even. Dont have any mounting screws. TERMS OF SALE - PLEASE READ ALL CAREFULLY- It is all important and will save problems later. No Reserve Method of Payment: Paypal Shipping (for continental U.S):$ 18.00 to lower 48 states only. Please note that shipments to Alaska, Hawaii or any of the U.S. Territories will cost more so if you live in one of those locations, please do not pay until you have received an adjusted invoice. - Buyer pays all shipping costs plus any state taxes as per the new laws regarding Ebay sales. NOTICE REGARDING NO INTERNATIONAL SALES. Sorry to say that after all my years on Ebay, I have come to the place of no longer offering any international sales. I was scammed by an international buyer using a drop ship service and was given a negative feedback as well for not going along with the scam. It just isnt worth the hassle and headaches to me any more. If you dont have a US shipping address, I will not ship. I still will ship to US addresses that are drop shipping sites but with this condition. I pay the postage and track the item to mail to the US site and address and once the tracking states that it has arrived at that location, all my responsibility has ended. The cost of shipping from the drop ship agent to its final destination is between the buyer and the agent. I cant track it after it leaves the drop shipping site and anything that might happen to it after that point is between the buyer and the drop ship service they used. If it gets lost or arrives damaged or broken, it is no longer any of my responsibility. ATTENTION: PLEASE READ. Some last important instructions. -- Please do not request that we stop an auction or remove an item from an auction once it has started. The only reason I will ever stop an auction early is if I feel it is necessary for reasons such as if I made a serious mistake in the listing, or during the course of auction lost or damaged the item, etc. I do not stop auctions early at bidders request for the purpose of selling the item before the end of auction. It is against Ebay policy, plus not fair to other potential bidders, and I will not consider request to sell an item early for any reason. I also will not switch to a Buy it Now option on an item if it is not listed with that as an option, so please do not ask me if I would consider doing so. I am very happy to email for purpose of answering questions about the item for sale and giving more details if necessary, but I will very likely NOT reply to any email requests to do any of the above mentioned requests. Thank you for your consideration in this matter. Thank you for reading and agreeing to all the terms of Ebay auctions and feel free to email me if you still have any questions about the item or terms and conditions. Thank you for looking at this item and we look forward to being of service to you.

Vintage 1954 Jensen P12Q 12 8? alnico speaker in very good working condition. This model has been used in some of the most legendary tube amps of all time, including the holy grail Fender 5E3 tweed Deluxe and many others. This speaker was taken from a functional Hammond/Leslie organ speaker cabinet and is in very good shape, with some normal cosmetic signs of use and a very small pinhole along one edge of the cone that doesnt affect functionality (see photos). Quite clean overall for its age and ready to rock! Resistance: 6.2? * If you are located outside the US and arent able to place your order, please contact us for a shipping quote.

Jensen Alnico P15N4 15’ Speaker. Great condition. Multimeter reading 12.3 ohms. Listing is for single, but there is another matching speaker.