Tested and working.Comes with mounting screws.This listing is for the pair. This is for sale locally so I may end this auction early if I get an offer and there are no bids. USA shipping only.No returns unless damaged in shipping. You have 3 days for notify me for a refund.

this is for a SINGLE emit tweeter pulled from RSii speakers. if you need 2, please change the qty to 2, or 3 or 4 if you want all of them. the picture is of all the tweeters i have, and is for reference. you will receive only 1 of them. tweeter works as it should. these should fit other models listed, but do your homework before you buy. this magnet is thicker than the 490123 tweeter but should fit, it just has a litle higher power handling. again, this is for ( 1 ) tweeter only

Tested and working.Comes with mounting screws.This listing is for the pair. This is for sale locally so I may end this auction early if I get an offer and there are no bids. USA shipping only.No returns unless damaged in shipping. You have 3 days for notify me for a refund.

Pair of Emit Tweeters pulled from a working RS7 speaker. Units are in good cosmetic and working condition. Thanks for looking! B - Bin Z1

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Emit Tweeter pulled from a working RS7 speaker. Unit is in good cosmetic and working condition. Thanks for looking! A - Bin Z1

This is the stock control board pulled out of an Infinity RS IIb speaker cabinet. All the wires for the entire speaker are also included as well as the graphic sticker that was on the exterior to label everything. This unit is untested and thereby listed as Parts / not working. I did not have the appropriate gear to fully test the system before teardown. The EMIMs and EMITS pulled off both speakers were all working. Visually, i dont see anything wrong with the board and I don’t see any evidence of amateur DIY meddling with the electronics. If someone worked inside there, they didn’t leave any trace of poor workmanship. I would assume they’re working but without the ability to test them I cannot sell them as anything besides “parts”. We never list things that we know are broken without explicitly stating so, check our feedback to see many buyers who took a chance on some of our untested items and received fully functional equipment.

Pulled from a RS2B speaker system. I have 3 good thicker tweeters total for sale. They’re all in the same condition. All have been tested for ohms and came out with 2.8 (shown), 2.9 and 3.0. If you want a specific ohms speaker please let me know at checkout. If you see less than 3 than ask before assuming the one you want is still available

Pulled from a RS2B speaker system. Tested for ohms and came out with 2.8 (shown). They have not been tested for audio quality. They are sold with the only guarantee being that they have continuity and the ohms reading is within the ranges stated above. This is the skinny tweeter from a RS2B system, I have the thicker ones listed separately

Hello, I have for sale my Infinity Pair of Polydome RSIIIb RS IIIB 4 5 6 BThese are in working condition.These are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

Vintage Infinity EMIT Ribbon Tweeter from RS IIa speaker. Tweeter only, not the entire speaker. Very good condition, working properly. Shipping to lower 48 states and internationally using the eBay Global Shipping Program. Free local pickup from SW Florida 33917. Please no bidders with zero transactions. Please see my feedback. Will be carefully packed. Bid with confidence.

Vintage used Infinity EMIM Ribbon midrange from a working RSIIa speaker. Midrange only, not the entire speaker. Very good condition, working properly. Last photo is shown for reference only, to show the model speaker this was removed from. Shipping to lower 48 states and internationally using the eBay Global Shipping Program. Free local pickup from SW Florida 33917. Please no bidders with zero transactions. Please see my feedback. Will be carefully packed. Bid with confidence.

NIB INFINITY SPEAKERS 2 PAIR INFINITY EXTRA POINT FIVE SATELLITE . Shipped with UPS Ground.

Infinity EMIM midrange speaker pulled from a RS2B cabinet. I have all 6 EMIM speakers pulled from the two cabinets. They have all been tested for Ohms and they all range between 2.9 ohms and 3.4ohms with most of them sitting at 3.3-3.4ohms. I have not tested any for sound or audio quality. The only guarantee with these speakers is that they have continuity and will read within the ohm specs stated above. They all have a little hole or 2 in the black fabric (some kinda moth or something must have ate it) but they are not damaged on the ribbon. Some of the steel parts have slight surface rust that can be cleaned up easily. These have not been taken apart or modified. If you want a specific OHM range please let me know at checkout. If you buy multiple and want matching impedance let me know. Ask questions before checkout, there will be no returns for any reason besides damage in shipping. You must have a quality multimeter with clamping probes to prove the ribbon lost continuity from damage during shipping to start a damage return. They all have invisible to the naked eye markings to identify them to avoid fraudulent returns from part swappers. I believe they fit these models : Reference Standard 1- RS1 Reference Standard 1B-RS1A/b Reference Standard RS2A/B RS2 RS2.5 RS4.5

This listing is for ONE complete emblem. These are the original 2-piece emblems that sandwich between the speaker cover fabric. Both have all their parts including original clips. Aluminum faceplate, polymer backing plate and metal retaining clips. Came off RS-IIB set of speakers but were used in a couple different models around that time. Measures 3.5” X 1.25”

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 2# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 1# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 1# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 2# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 2# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

Hello, I have for sale my Infinity IRS Epsilon EMIM High Energy 1# MidrangeThis is in perfect working condition. This is in As Pictured physical condition.Mint RibbonsThis will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.Will ship Worldwide.If you have any questions please feel free to ask, thank you!

INFINITY QB EMIT RIBBON TWEETERS, BOTH TWEETERS ARE IN PERFECT WORKING ORDER,CHECKED FOR DCR & DO READ 3.1 / 3.0CONDITION OF BOTH ARE VERY GOOD.. HAPPY TO ANSWER ANY QUESTIONS.

Pair of woofers from Infinity RS-IIb speakers. They need refoaming but they still transmit sound and read 3.4-3.5 ohms on every speaker. The only damage is on the foam parts and some of the paint is peeling. All the other components on the speaker are in good shape. At the time of listing I have 2 pairs available, all in the same condition. I can combine shipping if you buy all 4. You’ll have to message me first and let me know that’s what you want to do, or we can do combined shipping thru invoice/partial refund

Pr of quality Infinity Vintage Emit ribbon tweeters, excellent vintage USA design, craftsmanship and sound quality. They are in Working condition, original. One tweeter shows some wear to the ribbon but works fine, the other tweeter shows little wear and works fine. There are some nicks a dings on the front, some oxidation of the frame. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :)