Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

Two (2) Infinity RS300 Speakers in Oak Hardwood Sealed Cabinets with Two (2) 15-inch Stands in Very Good Condition. The RS300 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. Both 8 inch woofers need to be replaced, otherwise in perfect condition. Dimensions: The speaker cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Weight: Each speaker weighs approximately 23 pounds.

Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

You are Looking At A Lot Of 2 Original Tweeters Only For Sale Off A Pair Of Infinity RS-3000 902-2722 67050 Read On Please Thank You For Looking .

Offered for your consideration is a vintage Infinity #902-4130 ¾ inch (19mm) Polyspherite dome tweeter, removed from my RS4001 speakers, manufactured c.1989. This tweeter was also used in the RS2001, RS3001, and likely some other Infinity models from this period. So, please have a look at my large photos and read the remaining description to decide if this capable Infinity high frequency driver is correct for your needs. *Although the listing is written largely in singular to avoid any confusion, two (2) identical Infinity 902-4130 tweeters are available for purchase at time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This Infinity Polyspherite tweeter is in clean, excellent condition. It has a perfect dome and the faceplate has no scratches or cracks. Plus, the magnet structure is free of chips or oxidation. And, the +/- input terminals are marked for polarity (red = positive) and have never been soldered on the spades. Overall, this tweeter looks practically new! Most importantly, it sounds terrific—strong, clear, and very sparkly with its impressive 22kHz upper limit. Plus, as rated to 125W in the RS4001, it’s a sturdy design as well. And, I tested its DC resistance at 5.6-5.7?, consistent with a 6 ohm nominal driver rating. Lastly, the faceplate measures 3 11/16” diameter, it stands 1” tall, and the three mounting holes are 2?” apart, c-t-c. This is a nice find for someone that has a blown or damaged tweeter in their RS4001 or other suitable model. And, long out of production, it would make a smart spare to have on hand for possible future needs. As pictured and described, this outstanding Infinity ¾” Polyspherite dome tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $8.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the above photo is presented only for donor model reference

Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

Offered for your consideration is an Infinity grille emblem removed from my RS3000 speakers, manufactured c.1988. This metal emblem style was used on a number of Infinity Reference Standard and other speakers in the 1980’s, but the buyer is responsible for accurately assessing its suitability for any model other than the RS3000.So, please have a look at my large photos, the measurements, and read the remaining description to decide if this Infinity emblem is correct for your needs.*Although the listing is written largely in singular to avoid any confusion, two (2) Infinity grille emblems are available at the time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will stay the same whether you buy one or two. This Infinity emblem is in clean, very good condition. It measures 1?” wide x 7/16” tall and is made of metal with black, crinkle-finish enamel on front and raised, silver-painted symbol and lettering. There are no dings or finish wear noted. Plus, both mount studs are present and one received a dab of rock-hard JB Weld epoxy to reinforce a crack, as pictured above (the emblem to be sold first, not pictured, is excellent). Overall, this Infinity emblem presents exceptionally well.As pictured and described, this metal Infinity grille emblem is offered at a competitive price. Terms of Sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $3.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the photo directly above is presented only for donor model reference

Two (2) Infinity RS300 Speakers in Oak Hardwood Sealed Cabinets with Two (2) 15-inch Stands in Very Good Condition. The RS300 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. Both 8 inch woofers need to be replaced, otherwise in perfect condition. Dimensions: The speaker cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Weight: Each speaker weighs approximately 23 pounds.

2 x Infinity 8 IMG Graphite Membran Basslautsprecher 902-4165A / 70920 für RS 3001 4001 5001in OVP Unbenutzt, 100% i.O. und in OVP. Versand gut verpackt per DHL. Wichtiger Hinweis: Da es sich hier um eine Privatauktion handelt kann leider keine Rücknahme oder Garantieleistung angeboten werden. Bei den eingestellen Fotos handelt es sich um Originalaufnahmen des angebotenen Produkts. Alle Angaben nach bestem Wissen und Gewissen. Bieten Sie bitte nicht, wenn Sie mit diesen Bedingungen nicht einverstanden sind. Vielen Dank!.

Two (2) Infinity RS300 Speakers in Oak Hardwood Sealed Cabinets with Two (2) 15-inch Stands in Very Good Condition. The RS300 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. Both 8 inch woofers need to be replaced, otherwise in perfect condition. Dimensions: The speaker cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Weight: Each speaker weighs approximately 23 pounds.

Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

Two (2) Infinity RS300 Speakers in Oak Hardwood Sealed Cabinets with Two (2) 15-inch Stands in Very Good Condition. The RS300 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. Both 8 inch woofers need to be replaced, otherwise in perfect condition. Dimensions: The speaker cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Weight: Each speaker weighs approximately 23 pounds.

Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

Two (2) Infinity RS300 Speakers in Oak Hardwood Sealed Cabinets with Two (2) 15-inch Stands in Very Good Condition. The RS300 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. Both 8 inch woofers need to be replaced, otherwise in perfect condition. Dimensions: The speaker cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Weight: Each speaker weighs approximately 23 pounds.

Infinity Reference Component Crossovers. 300 watt max good quality. Tested good working order. No returns sold as is.

tested good working order and clean with no tears - approx 3 inch and a bit centres - 1 inch dome

measure OK but need refoaming - so sold strictly for parts as pictured

Offered for your consideration is an Infinity grille emblem removed from my RS3000 speakers, manufactured c.1988. This metal emblem style was used on a number of Infinity Reference Standard and other speakers in the 1980’s, but the buyer is responsible for accurately assessing its suitability for any model other than the RS3000.So, please have a look at my large photos, the measurements, and read the remaining description to decide if this Infinity emblem is correct for your needs.*Although the listing is written largely in singular to avoid any confusion, two (2) Infinity grille emblems are available at the time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will stay the same whether you buy one or two. This Infinity emblem is in clean, very good condition. It measures 1?” wide x 7/16” tall and is made of metal with black, crinkle-finish enamel on front and raised, silver-painted symbol and lettering. There are no dings or finish wear noted. Plus, both mount studs are present and one received a dab of rock-hard JB Weld epoxy to reinforce a crack, as pictured above (the emblem to be sold first, not pictured, is excellent). Overall, this Infinity emblem presents exceptionally well.As pictured and described, this metal Infinity grille emblem is offered at a competitive price. Terms of Sale:I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $3.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the photo directly above is presented only for donor model reference

needs refoam

I sell hard to find new & used parts for vintage audio electronics,record players,turntables,tube radios,ham radios,recievers,Tuners,Amplifiers,test equipment,speakers,etc.for you or your technician to help you restore your item to its original condition..Please look at picture/pictures closely.I try to describe as i see it.I offer 100% Satisfaction Gauranteed .USA or overseas.Auctions may be combined for cheaper postage..If you have any questions please feel free to email me. .Postage is quoted for lower 48 states. . .Will ship ,USPS only .. .International bidders welcome with EBAY GLOBAL SHIPPING PROGRAM..Please ask any questions you may have..After the aloted times i will relist item if payment is not received.If you need more time or special araingments by all means email me.Thankyou for looking at my auction.

2x Schaumstoffsicke pour Infinity RS3000,RS3001,RS4000, RS4000A+ Kleber&anleitCette fiche produit a été automatiquement traduite. Si vous avez des questions, n’hésitez pas à nous contacter.Joffre 2x (2 pièces) HQ de haute qualité Contours en mousse de 8 compatibles avec Réparation de châssis denceintesInfini RS3000, RS3001, RS4000, RS4000AInfini 902-2666 Incl. Instructions de collage et de réparation Tous types de réparations denceintes Infos sur Loudspeaker-doktor.de réparation de haut-parleur     Le prix indiqué est un prix final hors TVA. les frais de port indiqués dans loffre. La taxe de vente ne peut pas être indiquée séparément en raison de la réglementation relative aux petites entreprises.   Tous les noms de marque et désignations mentionnés dans mon offre sont des marques déposées de leurs propriétaires. Les noms de marques et marques cités ne sont utilisés que pour indiquer la compatibilité des produits que je propose (ce que lon appelle informations descriptives), les produits sont des accessoires compatibles et des pièces détachées du marché de la rechange gratuite, il ne sagit pas (sauf indication expresse) du produit dorigine du fabricant de la marque. Les numéros de pièces de rechange ne sont également utilisés que par les acheteurs potentiels à des fins de comparaison et didentification. Le prix indiqué est un prix final hors TVA. les frais de port indiqués dans loffre. La taxe de vente ne peut pas être indiquée séparément en raison de la réglementation relative aux petites entreprises. Tous les noms de marque et désignations mentionnés dans mon offre sont des marques déposées de leurs propriétaires. Les noms de marques et marques cités ne sont utilisés que pour indiquer la compatibilité des produits que je propose (ce que lon appelle informations descriptives), les produits sont des accessoires compatibles et des pièces détachées du marché de la rechange gratuite, il ne sagit pas (sauf indication expresse) du produit dorigine du fabricant de la marque. Les numéros de pièces de rechange ne sont également utilisés que par les acheteurs potentiels à des fins de comparai Marke Markenlos Markenkompatibilität Für Infinity Produktart Sicken EAN Nicht zutreffend

Vintage Infinity tweeters from my private collection. Ive never used them, only stored them in a dry room since I bought them but I tested them and they work perfect. Very sensitive (loud) tweeters, also sound crispy and detailed. Multimeter shows 5.5 Ohms spot on (on both tweeters). They will be well wrapped separately, then boxed.