Some small cosmetic flaws but nothing major and nothing that affects the performance of the power house amplifier. 200 watts @ 8ohm 300 watts @ 4ohm ATI 7 year transferable warranty with about 4 years left. ________________________________________________ ATI AT525NC Amplifier - Class D Series 5 Channels - 200 Watts/Channel Amplifier Technologies, Inc., the prolific manufacturer of many of the high end audios best amplifiers today added a new series of amplifiers. The ATI AT525NC amp and the entire AT520NC amplifier series are rated at 200W RMS per channel into 8 ohms and 300W RMS into 4 ohms. They are available in 2 to 8 channel configurations. The ATI AT525NC amplifier breaks new ground in other ways. The ATI AT525NC amp is the first ATI amplifier to use a micro-processor control for turn-on delay and feature automatic AC power recognition and configuration. The amplifiers not only recognize whether they are connected up to 117V or 230V nominal power, but they automatically self-configure. The amplifiers also incorporate a new and novel sleep circuit. When the amplifier receives no input signal for a period of 10 minutes, power is removed from the output modules and a front-panel LED begins to flash. As soon as an input signal is detected on any channel, normal playback operation resumes instantaneously. Per Morris Kessler, ATIs president and chief engineer, We are excited to offer amplifiers with ATIs legendary high performance and reliability in designs that reduce amplifier weight by up to 50%. With rated distortion below 0.05% and signal-to-noise ratio of 123 dB (minimum, referenced to rated output), each amplifier in the series is capable of playing back the full dynamic range available on todays lossless recordings.

Hypex DS 4.0 class d verstärker modul Subwoofermodul UcD digitaltechnik. Das Modul war noch nicht eingebaut! Dank Digitaltechnik bleibt es erfreulich kompakt und bewahrtauch wenn es gefordert wird einen kühlen Kopf. Die 400 Watt an 4 Ohm (210 Wattan 8 Ohm) stellt es außerdem vollkommen klaglos bereit. Das DS 4.0 ist das dritte einer neuen SubwooferVerstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einensehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle desSubwoofers garantiert. Seine 400 Watt @ 4 Ohm oder 200 Watt @ 8 Ohm, liegen ohne großen KühlaufwandDank der neuen Digitaltechnik an den Ausgängen dieses nur 264 mm mal 267 mmmessenden Moduls an. Seine Einbautiefe beträgt nur 6 cm. Technische Daten Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB Trennfrequenz: 30 Hz - 120 Hz 12 dB Bassboost Frequenz: 20 Hz - 50 Hz Bassboost Level: 0 - +6 dB Dämpfungsfaktor: >1000 Eingangsimpedanz: 10 kOhm Eingangsimpedanz high-level: 1 kOhm Engansanschluss: Cinch Stereo, 5.1 Schraub / Banane Stereo Merkmale: Class D UcD design Kurzschlussschutz Abmessungen: 267 mm x 267 mm x 70 mm Gewicht: 4.2 kg

NAD Masters M22 v2 Class D Stereo Amplifier XLR & RCA inputs.The Masters Series M22 is based on a version of Hypex Electronics model NC400 NCore amplifier. Purchased late 2020, in original NAD double box for safe delivery. Check out the EXCELLENT review on Stereophile!! AUDIO SPECIFICATIONSContinuous output power into 8 ohms and 300 W (20 Hz-20 kHz at 0.1% THD, both channels driven)4 ohms (Stereo mode) Continuous output power into 8 ohms (Bridge mode) 900 W (20 Hz – 20 kHz at 0.1% THD) THD+N (20 Hz – 20 kHz, CCIF IMD, SMPTE IMD, DIM 100) 100 dB (A-weighted, ref. 1 W in 8 ohms>120 dB (A-weighted, ref. 300W in 8 ohms) Clipping power (Stereo mode, at 1 kHz >300 W8 ohms 0.1 % THD) Clipping power (Bridge mode, at 1 kHz >950 W8 ohms 0.1 % THD) IHF dynamic power (Stereo mode, at 1 kHz 1 % THD) 8 ohms: 400 W4 ohms: 700 W2 ohms: 1000 W Damping factor >800 (ref. 8 ohms) Frequency response ±0.1 dB (20 Hz - 20 kHz) Input sensitivity (for 300W in 8 ohms) 1.73 V Gain level Low: 19 dBMedium: 24 dBHigh: 29 dB Minimum input level for Auto Trigger 5 mV at 1 kHz Standby power <0.5 W DIMENSION AND WEIGHTGross dimensions (W x H x D) 435 x 103 x 379 mm17 1/8 x 4 1/16 x 14 15/16 inchesNet Weight 8.9 kg (19.6 lbs) Shipping Weight 15 kg (33.1 lbs)

JBL Synthesis SDA-7200 7 Channel Multi Power Amp Amplifier. In excellent condition. Comes with box and rack ears. Will be sent by fully insured post with next day delivery.

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.

Hypex DS 4.0 class d verstärker modul Subwoofermodul UcD digitaltechnik. Das Modul war noch nicht eingebaut! Dank Digitaltechnik bleibt es erfreulich kompakt und bewahrtauch wenn es gefordert wird einen kühlen Kopf. Die 400 Watt an 4 Ohm (210 Wattan 8 Ohm) stellt es außerdem vollkommen klaglos bereit. Das DS 4.0 ist das dritte einer neuen SubwooferVerstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einensehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle desSubwoofers garantiert. Seine 400 Watt @ 4 Ohm oder 200 Watt @ 8 Ohm, liegen ohne großen KühlaufwandDank der neuen Digitaltechnik an den Ausgängen dieses nur 264 mm mal 267 mmmessenden Moduls an. Seine Einbautiefe beträgt nur 6 cm. Technische Daten Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB Trennfrequenz: 30 Hz - 120 Hz 12 dB Bassboost Frequenz: 20 Hz - 50 Hz Bassboost Level: 0 - +6 dB Dämpfungsfaktor: >1000 Eingangsimpedanz: 10 kOhm Eingangsimpedanz high-level: 1 kOhm Engansanschluss: Cinch Stereo, 5.1 Schraub / Banane Stereo Merkmale: Class D UcD design Kurzschlussschutz Abmessungen: 267 mm x 267 mm x 70 mm Gewicht: 4.2 kg

Untested

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.

Hypex DS 4.0 class d verstärker modul Subwoofermodul UcD digitaltechnik. Das Modul war noch nicht eingebaut! Dank Digitaltechnik bleibt es erfreulich kompakt und bewahrtauch wenn es gefordert wird einen kühlen Kopf. Die 400 Watt an 4 Ohm (210 Wattan 8 Ohm) stellt es außerdem vollkommen klaglos bereit. Das DS 4.0 ist das dritte einer neuen SubwooferVerstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einensehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle desSubwoofers garantiert. Seine 400 Watt @ 4 Ohm oder 200 Watt @ 8 Ohm, liegen ohne großen KühlaufwandDank der neuen Digitaltechnik an den Ausgängen dieses nur 264 mm mal 267 mmmessenden Moduls an. Seine Einbautiefe beträgt nur 6 cm. Technische Daten Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB Trennfrequenz: 30 Hz - 120 Hz 12 dB Bassboost Frequenz: 20 Hz - 50 Hz Bassboost Level: 0 - +6 dB Dämpfungsfaktor: >1000 Eingangsimpedanz: 10 kOhm Eingangsimpedanz high-level: 1 kOhm Engansanschluss: Cinch Stereo, 5.1 Schraub / Banane Stereo Merkmale: Class D UcD design Kurzschlussschutz Abmessungen: 267 mm x 267 mm x 70 mm Gewicht: 4.2 kg

In brand new condition, never fitted. Measurements - 24 x 9 cm

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.

Hypex DS 4.0 class d verstärker modul Subwoofermodul UcD digitaltechnik. Das Modul war noch nicht eingebaut! Dank Digitaltechnik bleibt es erfreulich kompakt und bewahrtauch wenn es gefordert wird einen kühlen Kopf. Die 400 Watt an 4 Ohm (210 Wattan 8 Ohm) stellt es außerdem vollkommen klaglos bereit. Das DS 4.0 ist das dritte einer neuen SubwooferVerstärkerreihe in Digitaltechnik. Die neue UcD Digitaltechnik garantiert einensehr niedrigen Ausgangswiderstand, welche eine noch bessere Kontrolle desSubwoofers garantiert. Seine 400 Watt @ 4 Ohm oder 200 Watt @ 8 Ohm, liegen ohne großen KühlaufwandDank der neuen Digitaltechnik an den Ausgängen dieses nur 264 mm mal 267 mmmessenden Moduls an. Seine Einbautiefe beträgt nur 6 cm. Technische Daten Ausgangsleistung: 400 W @ 4 Ohm / 210 W @ 8 Ohm Subsonic Filter (24 dB/Okt.): 12 Hz/-3 dB Trennfrequenz: 30 Hz - 120 Hz 12 dB Bassboost Frequenz: 20 Hz - 50 Hz Bassboost Level: 0 - +6 dB Dämpfungsfaktor: >1000 Eingangsimpedanz: 10 kOhm Eingangsimpedanz high-level: 1 kOhm Engansanschluss: Cinch Stereo, 5.1 Schraub / Banane Stereo Merkmale: Class D UcD design Kurzschlussschutz Abmessungen: 267 mm x 267 mm x 70 mm Gewicht: 4.2 kg

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.

Quantities available. Please ask. The UcD700LZ (Low impedance capable) amplifier module is a self-contained high-performance class D amplifier intended for a wide range of audio applications, ranging from Public Address systems to ultrahigh-fidelity replay systems for studio and home use. Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output. Works great with SMPS3K700 also available on demand.