Harmon Kardon Rabco ST-7 Turntable acquired from the family of the original owner. The belt is missing but when testing this turntable, the motor runs strong and the pulley spins. All three touch sensitive switches work and change color when depressed. The strobe lamp illuminates. Thats the best I can do as far as testing. I believe the tone arm extension is missing along with the cartridge, etc. The dust cover is cracked at the hinges. There are 16 auction photos included in this description. They are the most important part of this auction. Since I know less than nothing about this particular unit, please base your bid on the auction pictures. There is some paperwork for this unit which will be included. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost for this heavy turntable includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.)PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery.We will only ship to the address listed on Ebay.All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We include insurance free of charge on all of the items that we sell.We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.)Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped.Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there!All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean.Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller.We are no longer accepting bids from 0 FeedBack members or bidders.By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Harmon Kardon Rabco ST-7 Turntable acquired from the family of the original owner. The belt is missing but when testing this turntable, the motor runs strong and the pulley spins. All three touch sensitive switches work and change color when depressed. The strobe lamp illuminates. Thats the best I can do as far as testing. I believe the tone arm extension is missing along with the cartridge, etc. The dust cover is cracked at the hinges. There are 16 auction photos included in this description. They are the most important part of this auction. Since I know less than nothing about this particular unit, please base your bid on the auction pictures. There is some paperwork for this unit which will be included. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. Shipping cost for this heavy turntable includes packing/handling/and insurance. US SALES ONLY, (Ships to the 48 US Mainland States.)PAYMENT OPTIONS: All Ebay accepted payment methods including PayPal . For items valued at $100.00 or more there is SIGNATURE REQUIRED at the door upon delivery.We will only ship to the address listed on Ebay.All merchandise is sold as is. There are no refunds, and all sales are final. That is to protect us from the few dishonest Ebayers who play switch and blame, parts pirates, etc. We state the condition of the item to the best of our ability. Since most of the equipment we sell is vintage or preowned, there are no warrantees or guarantees on any of the items we sell. Look through our past auctions, we tell it the way it is. If you have any questions feel free to email us about the auction youre interested in. We will respond as quickly as possible. We include insurance free of charge on all of the items that we sell.We use FedEx exclusively for shipping. Most items are hand packed in house. We pack each item differently depending on size, weight, shape, etc. Your item will be packed as if we were sending it to ourselves. You will not be disappointed with our packing skills. We use Kinkos FedEx or a private packing service for excessively large and heavy items We will only ship to a legitimate street address. FedEx does not ship to P.O. boxes. WE ONLY SHIP WITHIN THE CONTINENTAL USA (48 States.)Your item will be shipped within 1 - 5 business days after receiving payment. A confirmation email will be sent when your item has been shipped.Fedex ground takes anywhere from 2-8 working days for delivery, depending on your location in relation to ours. Please have patience. As previously stated, I send out a confirmation email the day your item is shipped. We have no control over FedEx. I promise you, it will get there!All items are cleaned and disinfected on the exterior before photos are taken and again before shipment unless stated in my auction. You wont receive any dirty, smelly, smoke stained items from this seller. We do not open up working units to inspect or to clean.Under no circumstances will an auction be terminated early, it is unfair to my fellow Ebayers and to the seller.We are no longer accepting bids from 0 FeedBack members or bidders.By bidding on this auction you are agreeing to the conditions stated above. Thank you for your understanding and good luck.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Two Harman Kardon Rabco ST-5 ST7 ST-8 Tone Arms/Wands. One of them is missing the tracking force adjustment weight, it has a 3d replacement T-Bar, work great. Narrow head-shell. The other has two of the cartridge connectors twisted off, on is lost, one is included.. It has the wider head-shell. The screw holding the head shell in place is not original, but holds in the T-Bar. This is how I received it. See pictures for details. Please, please, ask any questions. From timothybhewittesq: FYI - These are not for an ST-8 Response: Hi timothybhewittesq,I respectfully disagree; the wands from the ST-5/ST-7 are electrically and mechanically interchangable with those from the ST-8, and vice-versa.There is a single difference, the knurled Lock Nut ,Tone Arm is silver on the ST-5 and ST-7 with straight cut knurls, and black on the ST-8, with a crosshatch knurl. But they are otherwise identical, and as I stated, interchangeable.So I stand by the statement ST-5, ST-7 ST-8 Tone Arms. (emended the description to use the phrase Tone Arms instead of Tonearms, in keeping with the official Harman Kardon documentation parts description.And, as always in my life, I reserve the right be be proven wrong!Best, H

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Super Rare 1971 Harman Kardon Rabco ST-4 Turntable,. believe it or not belts are good, it runs, seems to be missing parts I cannot find, has both pieces of headshell, one side has crack and there is some tape residue, its been around exactly as long as me, so imagine it survived all this time, needs a home that can bring her back.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 and the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways. Update: Someone asked me my opinion of which was better, the ST-5 or the ST-8. Here is my opinion: There are tradeoffs. Both are very cool looking machines, and the linear tracking appeals to the engineer in me. The ST-8 looks cooler, the electronic speed switch is visually more interesting than the mechanical switch on the ST-5. The contrast of the brushed aluminum and the black anodized aluminum is more visually appealing to me than the all brushed aluminum. The ST-5 is much less complex, and so will last longer, and be easier to service. For example: a replacement motor for the ST-5 is $40; for the ST-8 - if you can find one - is about $300 - $600; and another: The ST-8 is a single motor, with two speeds, and two potentiometer speed adjustment controls, while the ST-5 has a single speed motor, with a two diameter pulley and a mechanism to switch the belt between the two - simpler. The air-pot in the ST-8 is still being made, but costs $180 new; I dont know about the one in the ST-5. The ST-8 has the audio cueing/shut-off mechanism, the ST-5 does not - simpler. Much else is the same between the two. I am paring down my systems to a single ST-7 and a single ST-8, they are a matching set, and look fantastic next to each other. To me, the ST-5 is a slightly better choice for the long run, the ST-8 looks better - and better suits the tinkerer in me.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways.

Vintage Harman Kardon ST-5 Rabco turntable - excellent condition. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, one of the nicer Ive ever had. And, it is priced accordingly, but I may well except a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage StereoNot perfect, but very, very nice, and note, this is about 40 years old.Sold without cartridge - cartridge in it seems dead, but the turntable has been tested. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic condition:1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few very, very light scratches on the aluminum base and top panel, visible in the photos, almost need a magnifying glass. There is one ding above the H-K logo, visible in pictures.3) The dust cover is original clear, has some light wear, with one repair around the left hinge.4) The cueing and speed control plastic trim pieces are original (!)5) The leveling bubble is a replacement, better than the original.Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable.2) The cartridge descends nice and controlled.3) The speed is spot on, the strobe shows the speed as steady.4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it.5) The feet are very nice adjustable replacements.6) Two of the belts are replacements, work as original.7) If I can find one fault, it is that it doesnt switch to 45 RPM very easily. The mechanism is mechanical (meaning the motor runs fine), its that the belt doesnt move very easily to the 45 RPM part of the motor pulley. Misc: Listed locally on CL, strongly prefer local pickup.The black spring clips are meant to hold the cueing level and speed control plastic trim pieces in place. I have included them, scotch taped to the top to keep them safe. Will be packed very with platter removed and tone arm secured Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways.

Super Rare 1971 Harman Kardon Rabco ST-4 Turntable,. believe it or not belts are good, it runs, seems to be missing parts I cannot find, has both pieces of headshell, one side has crack and there is some tape residue, its been around exactly as long as me, so imagine it survived all this time, needs a home that can bring her back.

Vintage Harman Kardon ST-5 Rabco turntable with Grado G-1+ cartridge, runs, sounds and looks great. Linear tracking with a Rabco arm. Last model in the line of iconic ground-breaking turntables. If youre looking, you probably know about these beautifully designed machines. If you arent familiar with these, or if you are not mechanically inclined/interested, this may not be for you, it is nicely tuned right now, but these vintage turntables sometimes required TLC.This one is in excellent overall condition, all original, one of the nicer Ive ever had. And, it is priced accordingly, but I may well accept a reasonable offer so it goes to a good and caring home :)Timeless modern look, puts MCM in its place. Vintage Audio, Vintage Stereo Completely original, feet, belts, cartridge, dust cover, screws, tone arm, tracking adjustment screw.Not perfect, but very, very nice, and note, this is about 40 years old.Sold with Grado G-1+ cartridge - plays great, but the needle was bent at some point and straightened, looks and plays great, excellent stereo separation, but probably not as nice as new. Jimi Hendrix record not included.Please, please (!), ask any questions.And, please, take this process seriously, it is your time and my time. As I have learned from previous experience, if you have zero or low feedback, please message me before bidding.The cosmetic / general condition: This is completely original, down to the lock washers on the top plate screws, the platter retainer wavy washer, etc.1) The brushed aluminum tops, covers and side walls are in excellent condition, wonderful brushed aluminum.2) There are a few light scratches on the aluminum left side panel, might not even be visible in the photos. 3) Logo is super clean with good definition and color.4) The dust cover is original clear, has some light wear, with some small cracking around the left hinge.5) The cueing and speed control plastic trim pieces are original (!)6) The leveling bubble is original and still accurate. 7) The feet are original adjustable. Note: the rubber isolators that attach the feet to the chassis are a bit old and stiff, so the inner adapter of the threaded adjustable feet spin rather than grip tightly, making screwing the feet up and down a little tricky - not broken, just not tight as original. 8) The speed control, and the queuing plastic trim pieces are original (!) The speed control is cracked, and has sprung from its retainer clip (included). Doesnt affect performance and looks perfect. Mechanical:1) The tonearm tracks as desired / expected, this is completely adjustable. 2) The cartridge descends nice and controlled. 3) The speed is spot on, and switches easily from 33 to 45 RPM. 4) The electronics are completely untouched, original, same for the motor, wiring, circuitry, etc. - it is it came from the factory, and as I bought it. 5) The two belts are original, tight, and function perfectly. The carriage bar rotates freely.Misc: Listed locally on CL, strongly prefer local pickup.The black spring clip is meant to hold the speed control plastic trim piece in place. I have included it. Will be packed very well with platter removed and tone arm secured. Sold as is and no returns. Please understand that the above description is very detailed for a reason, to help you in your buying decision. But you will not be able to return this unless you pay postage both ways.

Harman Kardon / Rabco ST-6 Straight Line Tracking Belt Drive 2-Speed Turntable Item DescriptionConditionTested and is working, HOWEVER it makes buzzing noise when powered on and has some sort of circuit shortage which is unsafe and should be repaired, starts to smell if kept on for longer.Also the tonearm tracking rubber on bearing has perished so would require repair as well, as tonearm doesnt track now.Would require attention and is being sold strictly as FAULTY!In excellent visual condition for such age used item, seems to be used very little. just kept in storage all the timeStylus also in great conditionOriginal box is also included, but its worn Please read description and check photos for more information. Thank You! Included & NOT IncludedOriginal Box Included.No Users Manual or any other Accessories which are not in Photo or Description.DescriptionVery Rare High End Desirable Turntable by Harman Kardon / RabcoUnusual Straight Line Tracking System (Rabco)Belt Drive System33.3/45 RPM SpeedsAuto Stop FunctionAdjustable tracking Force (Counterweight)Nice Aluminium Casing, Brushed FinishStandard Stereo RCA Output (PHONO, no built-in Pre-amp)AC Powered with UK Plug Delivery & Returns Every item has Express Delivery Option (Express Delivery is only Available to UK Mainland)Please check Postage Section for Delivery Options on each ItemFor Local Collections Please choose Collection option at CheckoutItems will be Posted to eBay Address Only (Change address BEFORE buying)Items are dispatched Next Working Day (Or same working day if purchased before 9AM)Returns are Accepted for 30 Days ALWAYS CONTACT ME BEFORE OPENING A CASE OR RETURN REQUESTI will leave a Positive feedback for every Customer (After Positive feedback is received) More information about Business Registered as a Business since 2011 Offering wide range of used Modern & Vintage ItemsBased in UK (Scotland)Environmentally Friendly (Using second hand packing materials where I can)Describing items as accurate as I can (Highlighting all the Faults & Damages)Run by one person (I will know every single of my items very well) My eBay Other Items About ME Feedback Contact Us Why Shop Here? SMALL SIMPLE UK BASED Other Info 2000+ Sales:Per Year Items/Prices:UPDATED Daily Customers:100% HAPPY

Harman Kardon Rabco ST-7 Linear Tracking Turntable Parts / Repair It powers on but I have no way to further test this item, it has been stored for a few years, but was working when it was packed and put away. Will need to be cleaned or repaired at the buyers discretion. Sold as is for parts or for repair.Sold as is and no returns.

Harman Kardon Rabco ST-7 / ST-8 Plastic bushing for speed adjustment knob. Also includes the retaining clip / ring. Bushing is slightly scratched from removing the retaining ring / clip, otherwise in very good condition. Super closeups reveal tiny cosmetic flaws, looks fine on the machine. Pulled from an ST-7, original / authentic. Please, please ask any questions.

Harman Kardon Rabco ST-7 Linear Tracking Turntable Parts / Repair. Platter spins but the arm doesn’t move. Great project for someone with the expertise to restore. No cartridge included. Dustcover has a minor crack on the back by the right hinge. Not too noticeable. Please view photos for a better idea of condition. Shipping price is for lower 48 states.

Harman Kardon Rabco ST-7 / ST-8 Plastic bushing for speed adjustment knob. Also includes the retaining clip / ring. Bushing is slightly scratched from removing the retaining ring / clip, otherwise in very good condition. Super closeups reveal tiny cosmetic flaws, looks fine on the machine. Pulled from an ST-7, original / authentic. Please, please ask any questions.