Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

WE ARE AN AUTHORIZED GOLD NOTE DEALER!PREOWNED - $700 LIST! - FULLY TESTED - BLACK - INCLUDES ORIGINAL BOX/PACKING, MANUAL, POWER CABLE - THIS UNIT IS A UK 220V VERSION AND IT INCLUDES A 120V-220V EXTERNAL CONVERTER (WORKS GREAT)PH-1 is a shielded MM & MC phono preamplifier with isolated power supply that can be used with large variety of phono cartridges.The silent background stage is ideal to match PH-1 with low output MC cartridges (down to 0.15mV). To optimize audio performances, PH-1 features our proprietary quadruple stabilized.PH-1 was developed to be matched with any kind of MM and MC cartridges without the need of an external step-up transformer even when matched with cartridges with less than 10ohm of internal impedance.SpecificationsDimensions: 100mm W | 105mm H | 260mm DWeight: 3.5KgFrequency Response: 20Hz – 20KHz @ +/- 3dBTHD (Total Harmonic Distortion): <0.05% THD @ 20Hz-20KHzSignal to Noise ratio: -88dB Audio InputsAnalogue Inputs: 1 stereo RCAInput Sensitivity: 0.15mV MC, up to 7.0mV MMInput Impedance: 470? MC or 47k? MMGAIN: 70dB MC > 48dB MM > 65dB MC Audio Outputs RCA Line output level: 2V RCA fixed

GOLD NOTE PH-10(GENTLY USED) NOT GOING INTO ANY HYPERBOLE ABOUT THIS PHONO PRE. THERE ARE HUNDREDS OF REVIEWS ON GOOGLE (YOUR FRIEND) MANUFACTURER DESCRIPTION: https://goldnoteusa.com/product/ph-10/ SHIPS TO LOWER 48 ONLY

SUPER INDUCTIVE POWER SUPPLY The PSU-10 is a super inductive power supply exclusively designed for the PH-10 phono stage. Engineered with the best quality audio-grade components PSU-10 features a dual choke design powered by a double inductor driving the negative and positive high current stages and featuring and inductive filter on the analogue stage. The Gold Note proprietary Dual Chokes Design perfectly filters the signal voltages in order to eliminate all the possible electrical noise coming from the AC power system. The PSU-10 uses its massive power supply to shield the PH-10 phono stage from electro-magnetic interferences thus insulating it effectively from the AC power system. The large, ultra-clean power enhances super low noise, greater dynamic, better resolution and finer details for a more realistic high-end audio performance and pure audio pleasure. PSU-10 is able to help PH-10 extracting every single detail guaranteeing the best dynamic, resolution and realism music experience listening to vinyl. The PSU-10 can deliver high quality power using four transformers three of which are dedicated exclusively to the pure power supply and with one separated transformer dedicated to the inductive filter.

Ich biete hier einen Gold Note S3 in einwandfreiem Zustand an. Es handelt sich dabei um einen top Stereo-Verstrker, welcher auf dem Gebrauchtmarkt (insbesondere hierzulande) kaum noch zu bekommen ist. Durch das flache Design (geringe Bauhhe), passt er nahezu berall hin. Der S3 kommt aus tierfreiem Nichtraucherhaushalt. Klanglich drfte er fr den Gebrauchtmarktpreis unter 1000 nicht zu schlagen sein. Der S3 hat bei Einfhrung 2500 gekostet. Die technische Umsetzung ist konstant im Doppel-Mono Design aufgebaut. Im Liferumfang ist eine Fernbedienung mit der man die Lautstrker einstellen kann sowie die Bedienungsanleitung und ein Netzkabel enthalten. Die OVP ist nicht vorhanden. Fr den Versand wird ein Karton bereitgestellt und fr ausreichend Polsterung gesorgt. Eine Abholung wird dennoch bevorzugt. Der versicherte Versand samt Verpackungsmaterial ist bereits im Kaufpreis enthalten. Als Privatperson biete ich keine Garantie oder Gewhrleistung an. Die Rckgabe oder der Umtausch sind ausgeschlossen.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Gold Note PH-10 Phono MM/MC Vorverstärker mit dem PSU-10 Netzteil in schwarz. Der aktuelle Neupreis liegt um die 2500,-- Euro. Der Gold Note PH 10 und die PSU 10 befinden sich technisch in einwandfreiem Zustand ! Abholung nach Vereinbarung oder Versand nach Absprache möglich. Bei Versand erfolgt dieser innerhalb der EU versichert über DHL. Barzahlung bei Abholung. Privatverkauf, daher keine Gewährleistung, Rückgabe oder Umtausch und erfolgt unter Ausschluss jeder Sachmängelhaftung nach EU-Recht.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Gold Note PH-10 Phono MM/MC Vorverstärker mit dem PSU-10 Netzteil in schwarz. Der aktuelle Neupreis liegt um die 2500,-- Euro. Der Gold Note PH 10 und die PSU 10 befinden sich technisch in einwandfreiem Zustand ! Abholung nach Vereinbarung oder Versand nach Absprache möglich. Bei Versand erfolgt dieser innerhalb der EU versichert über DHL. Barzahlung bei Abholung. Privatverkauf, daher keine Gewährleistung, Rückgabe oder Umtausch und erfolgt unter Ausschluss jeder Sachmängelhaftung nach EU-Recht.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Gold Note PA-10 The PA-10 is small but powerful stereo power amplifier capable of delivering a power rate of 75W per channel @ 8 Ohm that can be increased to a considerable 600W @ 4Ohm when used in mono (Bridge-Tied-Load). COMPACT SIZE FULL POWER AMPLIFIER The PA-10 is the new power amplifier of the Gold Note Series 10 that can play either in Stereo or Mono (bridged) mode. Characterised by the greatest built quality and an impressive variety of functions, the PA-10 is an incredibly versatile power amplifier suitable for any modern High-End audio system. The aesthetic of the chassis is derived from the Series 10 products integrating the PA-10 seamlessly into a coherent concept inspired by the world- famous Italian style and Gold Note modular design. The power amplifier is composed of a high-quality chassis made from heavy aluminum panels and accurately selected audio components. The idea behind the PA-10 was to design a power amplifier compact in size but capable of astounding power capable of driving any kind of loudspeakers. The new great proprietary technology developed for the PA-10 allows the amplifier to act like a Class A amplifier doubling its power while lowering the speaker impedance. It features a 75Watt @ 8?, 150Watt @ 4? and 300Watt @ 2? in stereo mode, and an amazing 300Watt @ 8?, 600Watt @ 4? in mono mode. The PA-10 distinguishes itself with its great versatility, applying a lot of innovations Gold Note is now well known for. Starting from the adjustable Damping Factor, it allows a perfect pairing to any kind of speakers, from the most difficult to high-sensitivity and mini monitor, always providing the best matching. The Bridge-Tied-Load technology (Mono mode) makes the PA-10 a super high-power amplifier able to virtually drive any speaker on the market. The XLR stereo output enables the PA-10 to be configured in series for convenient high quality multi-room solutions, made easy by the automatic On/ Stand-by mode based on the audio signal received. The PA-10 comes with both RCA and XLR inputs. It optionally offers the possibility to be simultaneously connected to two different sources like the Gold Note PH- 1000 phono stage with volume control and the DS-10 4-in-1 DAC. More user friendliness is given with the in-house In/Out GN Link technology which allows putting the amplifier in master-slave- mode with other units presenting the same feature.

Gold Note PH 10 Silver – PH-10 Phonostage/Phono Preamplifier– (OPEN BOX) Audio Exchange is and authorized dealer for Gold Note products. All products are inspected and fully tested. They come with Gold Note manufacturer’s warranty. Condition:Open Box items are customer returns or display models with very little use. Each piece has been thoroughly inspected and tested to make sure there are no issues, and all supplies are included along with the original factory box. Generally, these models are in like new condition and come with the manufacturers full warranty. Photos are for reference only, All products are inspected and fully tested. Description Gold Note PH-10 Phono PreamplifierTHE FIRST PHONO STAGE WITH 2 INPUTS AND 6 EQ CURVESPH-10 is an ultra-versatile phono preamplifier that offers unique features, including EQ CURVES, LOAD and GAIN adjustments: a fully analogue design engineered exclusively with high quality coils, capacitors and resistors. The EQ curves are implemented using analog circuitry realized with last generation integrated circuits and low noise components because we believe in the absolute superiority of a fully analog design over digital equalizers. Instead of the antiquated and inefficient electromechanical switches, we opted for electronic switches to select the curves: in this way PH-10 can preserve unaltered the audio signal and safeguard its purity without giving up on the use of digital technology. The use of electronic switches also helps shorten the paths of the audio signal to obtain greater efficiency and less dispersion. Digital technology is used only for real-time management of the display. PH-10 is controlled via knob and display using a sophisticated micro-controller to select the functions through our custom firmware that is loaded on a micro SD dedicated flash memory and can be updated easily via PC. The micro-controller is separated and independent from the audio signal path to guarantee always clear and pure sound. Once the tonearms are connected, PH-10 can be set with 4 different GAIN levels [-3dB, 0dB, +3dB, 6dB] to match precisely the output level of any MM or MC cartridge. The perfect setup is guaranteed with 9 different LOAD options [10 , 22 , 47 , 100 , 220 , 470 , 1000 , 22K , 47K ] that will let you adjust the preamp to match it with a large number of cartridges in a quick, easy way. HANDCRAFTED IN ITALY WITH PASSION AND TECHNOLOGYThe secret behind PH-10We design, craft and assemble every single part! Every PH-10 is handmade in Italy with the best audio grade components to ensure flawless music playback. The level of quality meets the highest standard throughout the entire production: from the CNC machining to the assembly and finally to the electronic tests at the PC. To maximize the performance of the PH-10, we developed PSU-10, the dedicated external super power supply that allows PH-10 to achieve its fullest potential reaching an even higher degree of musical realism, better dynamics and deeper three-dimensionality. 6 EQ CURVES TO DELIVER OUTSTANDING PERFORMANCESYou will finally be able to switch from the internationally recognized RIAA curve, to the DECCA-LONDON or the AMERICAN-CBS-COLUMBIA curve, always graphically shown on the front display. And there s more, because you will also be able to enhance each curve with a modern Gold Note proprietary design for superior dynamic and powerful results. AUDIOPHILE IN EVERY POSSIBLE WAYPH-10 shows every detail on its 2,8 color display powered by Gold Note proprietary SKC Single Knob Control technology an intuitive control system developed to easily browse and select all the unit s functions. The unit can be externally powered by the dedicated external inductive power supply PSU-10 to enhance the performance even more. FINISHESBrushed Aluminum 2 SEPARATE INPUTSWith two separate RCA inputs you can connect two different tonearms and adjust settings independently for each single cartridge 4 GAIN OPTIONSPH-10 offers 4 different selectable GAIN levels -3dB, 0dB, +3dB, +6dB to precisely match any kind of output level for MM and MC cartridges 9 LOAD OPTIONSPerfect matching is easy and quick to achieve with 9 different load options 10 , 22 , 47 , 100 , 220 , 470 , 1000 , 22K , 47K 6 EQ CURVESTo achieve the best vinyl experience select the correct EQ curve: RIAA, DECCA-LONDON or AMERICAN-CBS-COLUMBIA DISPLAY & KNOBSKC is a unique technology that combined with a TFT display allows quick control of the functions through the single knob joggle ELEGANT & FUNCTIONALMade of solid machined aluminum, the shell body guarantees low frequency resonance, feedback vibrational control and low magnetic inertial field Who We Are:Audio Exchange is Richmonds premier audio and video specialists, operating since 1978. We are a brick & mortar retail store located in Richmond, VA. We have been involved in carrying the best U.S. made (McIntosh, Rogue, Nordost & more) and hand-picked imported equipment (Sonus Faber, Focal, ClearAudio & more). Please see our ebay reviews from our previous customers.If you have any further questions, please feel free to call us directly.

Zum Verkauf steht ein Phono Vorverstärker Gold Note PH-10 inkl. Netzteil PSU-10.Beide Geräte wurden im Juli 2023 mit Rechnung im Fachhandel gekauft.Die Technik funktioniert ohne Beanstandung. Optisch ist auch alles einwandfrei.Technische Daten und Lobeshymnen finden Sie im Internet. Versand innerhalb von Deutschland erfolgt verichert mit DHL und kostet 10,49 Euro.Beide Artikel befinden sich in der Originalverpackung und werden in einem separaten Karton versendet.Die Original-Rechnung vom 07.07.2023 lege ich der Lieferung bei (auch Anleitungen und Kabel). Ich verkaufe als Privatperson, ohne Garantie und Rückgaberecht. Wir sind ein tierfreier Nichtraucherhaushalt. Ich versichere, daß ich alle Angaben nach bestem Wissen und Gewissen vollständig und richtig gemacht habe.

Hallo zusammen, verkaufe hier meine oben genannte PH-10, optisch und technisch in einem einwandfreien Zustand, wenig gelaufen und funktioniert Tadellos. Versand nur innerhalb Deutschlands, in OVP. Shipping only within Germany!! Da es sich um einen Privatverkauf handelt, wird keine Rcknahme, Garantie oder Gewhrleistung geboten.

Plattenspieler Rega P7 + RB 700 + Gold Note Babele System ( NEU ) High End Plattenspieler gebraucht.Tonabnehmer muss vom Käufer montiert werden. Inzahlungnahme/Gebrauchtgerät. Das Gerät stammt aus einem tierfreiem und Nichtraucher Haushalt und ist aus 1. Hand. Technisch einwandfrei, optisch mit altersbedingten Gebrauchsspuren. Fachmännisch geprüft und komplett durchgecheckt. Das Gerät wird in einer sicheren und sauberen Verpackung geliefert. Eine Direktabholung mit Vorführung ist natürlich möglich. Lieferumfang : 1 x Plattenspieler Rega P7 + RB 700 + Gold Note Babele System wie Abgebildet. Achtung: Bei Abholung ist keine Zahlung via PayPal möglich! Ich gewähre für Gebrauchtgeräte 12 Monate Gewährleistung. Die MwSt ist nicht ausweisbar (§25 UStG Differenzbesteuerung)

Gold Note PSU 10. Neuwertig, aus Nichtraucherhaushalt. Gekauft im Mai 2021 zu verkaufen wegen Anlagenumstellung. Selbstverständlich voll funktionsfähig. Der abgebildete Karton wird noch mal neutral umverpackt.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Zum Verkauf kommt hier ein Gold Note Vasari Gold, neuer MM-Tonabnehmer mit 4,0mV Ausgangsspannung Der Tonabnehmer ist neu und wurde nur zum fotografieren ausgepackt. Bitte beachten Sie auch meine weiteren Angebote von HiFi Artikeln, Tonträgern und Filmen in meinem Shop, es lohnt sich bestimmt !Auch über einen Besuch in unserem Memminger Laden freuen wir uns jederzeit !