A great looking lot. This is the hi-fi section that was removed from a vintage console table, so it was hidden inside and accessed when you lifted the table lid. I tried it before the cable was cut off, and the record player doesnt rotate, the tape deck plays/rewinds and fast forwards, and the radio sounds. I just tried it with headphones, as the speakers were still built into the table it was removed from, and I could hear both the radio and the tape deck play. I did hear some crackle every now and then from the switches/sliders and noticed a hum. May have some other issues not spotted. Sold as spares/repairs as pictured. Approx. 87.5cm from side to side x 42.5cm from font to back x 12cm high (measured at the front of the case - so a bit higher including record player arm etc) The sides and underneath are open, so since trying it out, the power cable has been cut off. As such, sold as pictured for Spares/Repairs. Due to the size, sold as for COLLECTION IN PERSON ONLY from south Cumbria.

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases.Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. For the venerable GARRARD 201 Transcription Turntable used in 1931 by the BBC. Also, quite a number of EMG and Ginn Expert Gramophones used this high end motor. This part is always missing: An exact replica of the oiling plug that goes on top of the turntable spindle. The spindle is very short to start with, and with the plug missing, not only does dust go down the spindle into the bearings, records are also difficult to center. This is an exact replica of the plug, see the fourth picture with the original on the right hand side, and the replica next to it. The last two pictures show the plug in place on the 201. Made from blackened brass to the original specifications. Pls check my other listings for more Turntable and Phonograph items. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am selling parts from a Garrard Lab TYPE A turntable. Pls check the link below for more Lab 80 parts. If you need a part from the mechanism or dont see the part listed, shoot me a message. Click here for more Garrard Turntables and Parts FROM A Garrard TYPE A turntable.This is the main conical TURNTABLE SHAFT on which the MAIN PLATTER sits. This is the standard version used on most turntables from the 1950s, e.g. TYPE A RC88 RC120 RC98 basically anything after RC80 and before LAB 80This is a main part of the platter bearing. Pls note that for proper function you will also need the upper bearing race washer, which fits at the bottom of the shaft. Without this, the turntable will not run on the bearing balls. Pls check my other listings CONDITION: Close to new condition, very clean, tested runs great. Light scuffing of the outer surface The inner bronze bearings are in perfect shape, smooth without scratches. Item will be carefully boxed for safe shipping. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Turntables, Catalogs, Phonograph Items, books and records! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR LEVER KNOB is from a TYPE A turntable. (THE COVER IS FOR ILLUSTRATION ONLY - NOT INCLUDED) Will fit also Garrard turntables RC209 and 210Sits on top of the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 3/4 x 3/8, 3/8 highThe knob is just pressed onto the end of the L-shaped speed leverlCONDITIONClose to new condition, no chips cracks or scratches Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping.We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. I am parting out a Garrad RC88 turntable, pls let me know if you need other parts ***Click here for more Garrard Turntables and PartsThis GARRARD Speed SELECTOR Trim is from a TYPE A turntable. Will fit also Garrard turntables RC209 and 210Covers the Speed Selector lever of the turntableMolded tan plastic, polished aluminum scale, size 2 1/4 x 7/8Garrard mounted these by twisting the little tabs of the cover plate. Those tabs break off when removing the cover.Tabs are still about 2mm long and will seat cover securely on the chassis. A drop of contact cement or superglue will hold it in place.Otherwise:Close to new condition,aluminum scale in perfect shape. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for some great items up for auction and fixed price items: Click here for more great Books, Catalogs, Phonograph and Turntable Items! Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. Thank you for your interest, and enjoy! Powered by SixBits eCommerce Solution

Shipping: All items will be packed safely in a sturdy package for safe shipping. We ship internationally and offer combined shipping for multiple purchases. Expedited, Priority Mail and FedEx shipping available Once payment is received, we ship your item on the next business day. CENTER POST MULTI Play spindle for Any of these late Garrard changers: EV 554CP Center Post Spindle. Garrard #73940 (74080 & 74510). Fits Garrard record changers CC10, X11, 5-100 & 5-200, 5-300, 6-100, 6-100C, 6-200, 6-200C, 6-300, 6-300C, 42C, 42M, 440, 440C, 440M, 600 series, 620S, 620SP, 630S, 720C, 730M, record changers; Zenith part 876-540, 876-543 for many models. Specifications: Height (inches): 5 1/8 (I believe the spindle will fit all Garrard UNIMECH changer mechanisms with no semaphore, and the speed and size combined in a single selection lever) This part is often missing and should be added to your turntable. All these Garrards are superb and gentle record changers, working equally well on 78s and 33, Condition VERY GOOD. some faint scratches from use. Should work great. Dont have a turntable to test it. Photos may have been taken under fluerescent light. Color values may have shiften. WE OFFER SHIPPING DISCOUNTS. IF you win multiple items, please wait for me to send you an invoice first before paying. That way I can make sure that you will receive a single low postage for the whole package. Pls check more turntable and phonograph items in my other auctions. All items will be safely packed to avoid any damage and promptly shipped. Please check my other listings for some great vintage Turntable and Phonograph items, Phonograph and Music books! Click here for more great Phonograph and Turntable Items! Click here for more great 78 rpm records, Victrola items, CDs, DVDs and great books! Powered by SixBits eCommerce Solution

Decca Auto Deccalian Model 88 Record Player, 3 speed Garrard RC120/4D Deck. Comes with power lead, and powers up, deck spins on all 3 speeds and auto load works. However does need a new stylus. Someone has removed the legs previously but obviously doesnt affect use. Body exterior is worn and a little tatty, see pictures. Has an awesome rare Garrard RC120 deck fitted as shown in photos. If youd like any other pictures or have any questions please ask. Please check out my other similar listings

Garrard F45 45 RPM Automatic Record Spindle 5-200, 5-300, 6-100C, 6-200/C for compatible Garrard turntables. Stack 45s and use turntable as a changer.

Garrard F45 45 RPM Automatic Record Spindle 5-200, 5-300, 6-100C, 6-200/C for compatible Garrard turntables. Stack 45s and use turntable as a changer.

USED VINTAGE GARRARD 2025TC TURNTABLE SPARES REPAIRS RESTORATION. Unit powers up, turntable spins . Beyond that I have no means of testing ( i.e. no vinyl or speakers ) Collection only from CO79QP No returns or refunds on this item

Garrard LRS20 Record Spindle for 45rpm Records NOS.