Product Description: Power: 10W Weight: 48g Size 130*60mm *25mm Tips: Please allow minor deviation due to manual measurement. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Package Include: 1pc of Antenna Shipping: Shipping Estimated Delivery Time *Economy(without tracking): 11-35 business days *SpeedPAK(with tracking): 8-12 business days *EMS/DHL(with tracking): 7-10 business days, need to pay extra shipping cost For faraway region or countries (Brazil, Mexico, Peru, etc), the transit time may be longer than Overall Transit Time Frame. Notes, the delivery time may vary due to public holidays, natural disasters, customs issue and other unexpected impact, etc. Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to biddingying. Payment: We accept PayPal ONLY currently. Payment must be made within 4 business days. If you do not have Paypal account, please register at (www.paypal.com). Return & Refund: Returns are accepted within 30 days. Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or theres error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any. Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost. Feedback: As long as you are satisfied with your purchase, please kindly leave us a 5 stars Positive Feedback, as it is very important for our store performance. If there is any problem with your order, please contact us and give us a chance to resolve your problem Before leaving us a negative feedback.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

50? No Tune End Fed Half Antenna 10W Portable Single Band 80M-10M End Fed A5 features:Single band 80m-10m end fed half wave linear antenna provides antenna, which is designed as a highly portable cable antenna, and can be easily set as inverted V type, horizontal, inclined or vertical radiator (at higher frequencies). Your feeder is essentially balanced, so you t need a separate feeder.The high impedance half wave line is matched with your 50 ohm feed point through an integrated impedance matching ring transformer with a rated power of 10 . The high voltage capacitor on the transformer primary with a specific radiator length is used to further expand and reduce the SWR in the range of 80m-10m. It is designed to be used without using a tuner, and after optimizing the slave element, the SWR of any part of the band is ? 1.2.Specifications:Color: greenProduct name: untuned half wave antennaMaterial: PCB+metalImpedance: 50 ?Rated power: 10WSize: 100 x 71mmPackage Contents:1 x Untuned half wave antenna

End Fed Half Wave Antenna Transformer 49:1 NEW COOL DESIGN FT-140-43. Condition is New.I am the builder of this transformer and have tested it extensively on 40, 20, 15 and 10 meters.This size is designed for lower power applications. 80 watts on SSB, 50 watts on CW and 35 watts on digital.I have run these at much higher wattages with no ill effects, but I dont want to overrate these like many other sellers do. (see my other listings for the high power version and QRP version) I have a 66 foot end fed antenna that Im using and have found the SWR across all 4 bands to be 1.5:1 or less! Every transformer I sell has been individually tested to make sure it meets my expectations. I have performed dozens of signal comparisons with my full size G5RV and in the majority of the cases the EFHW was the winner. You can, of course, also use this on 80 meters with a 132 foot wire if desired. It has been my experience that connecting only the antenna wire and nothing else works very well! No Ground, No counterpoise, No Common Mode Choke, only the coax and antenna wire. I personally am using 50 feet of RG8X which works fine. Remember that the coax is part of the antenna, so dont make it too short. If you are in any way dissatisfied with this product just return for full refund (minus shipping). Size is 3.5 X 2.5 X1.5 (less connectors) Weight is about 5oz.At this time only shipping to USA and Puerto RicoNote: The labels on the box (antenna etc.) were added over the photo for clarity. They are not on the actual transformer box.For references, please check out my feedback and also google TennTennas for several videos and comments on my transformers.Thanks and 73, Walt

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

1:64 Balun for 4-Band 8-Band End Fed Antenna Range 1-30MHz Power 100W (PEP) NEW - For 4-band and 8-band end-feed antennas - Frequency range: 1-30MHz - Input impedance: 50? - Maximum power: ? 100W (SSB and CW); ?60W (for FT8, FM, AM, and FSK) - Need a wire (about 2.5 square meters) 20m/65.6ft long for 4-band end fed antennas, and 40.4m/132.5ft for 8-band. Use an antenna analyzer to trim it to a suitable frequency point Package Content: - 1 x Balun Note: Please allow a slight size difference due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Payment We only accept PayPal and Credit Cards. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registered address is the same with your eBay registered address. Shipping Your parcel will be sent within 5 working days. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Note: It may takes more than 30 working days to other countries such as Mexico, Brazil, Chile, Peru, because they are far away from China. PS: We also offer faster shipping service (3-5 days to deliver), such as DHL, EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it. Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding. Return Policy If you are dissatisfied with our item or service, then please contact us via eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner. We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message. Only unused, undamaged and original condition item can be qualified for a return. Returned products that are not in original packaging or with something missing are subject to minimum 30% to 50% of the total price. The seller is not responsible for returned parcels due to incomplete address or address impossible to deliver to. Feedback: We strive for 100% customer satisfaction! If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your e-mail within 24 working hours.

1:64 Balun for 4-Band 8-Band End Fed Antenna Range 1-30MHz Power 100W (PEP) NEW - For 4-band and 8-band end-feed antennas - Frequency range: 1-30MHz - Input impedance: 50? - Maximum power: ? 100W (SSB and CW); ?60W (for FT8, FM, AM, and FSK) - Need a wire (about 2.5 square meters) 20m/65.6ft long for 4-band end fed antennas, and 40.4m/132.5ft for 8-band. Use an antenna analyzer to trim it to a suitable frequency point Package Content: - 1 x Balun Note: Please allow a slight size difference due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Payment We only accept PayPal and Credit Cards. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding. And please make sure that your PayPal registered address is the same with your eBay registered address. Shipping Your parcel will be sent within 5 working days. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Note: It may takes more than 30 working days to other countries such as Mexico, Brazil, Chile, Peru, because they are far away from China. PS: We also offer faster shipping service (3-5 days to deliver), such as DHL, EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it. Customs Declaration: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding. Return Policy If you are dissatisfied with our item or service, then please contact us via eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner. We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message. Only unused, undamaged and original condition item can be qualified for a return. Returned products that are not in original packaging or with something missing are subject to minimum 30% to 50% of the total price. The seller is not responsible for returned parcels due to incomplete address or address impossible to deliver to. Feedback: We strive for 100% customer satisfaction! If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your e-mail within 24 working hours.

KopfhöRerkabel für HD25 HD560 HD540 HD430 HD250 KopfhöReradapter -Fed H3J5 Ideales Ersatzkabel: Perfekt als oder für beschädigtes oder verlorenes OriginalkabelErsatzteile, langlebig und einfach zu montieren.Feine Verarbeitung und perfekter .Spezifikation:Passend: Für HD 25-sp, HD 222, HD 224, HD 230, HD 250, HD 250 Linear II, HD 414, HD 414 SL, HD 420, HD 420 SL, HD 425, HD 430, HD 440 II, HD 442 II, HD 450 II, HD 480 Classic, HD 480 -II, HD 480 II, HD 490 II, HD 520, HD 520 II, HD 530, HD 530 II, HD 540, HD 540 II , HD 560, HD 560 II KopfhörerMaterial: MetallFarbe: SchwarzPackungsinhalt:1 x Kopfhörerkabel

KopfhöRerkabel für HD25 HD560 HD540 HD430 HD250 KopfhöReradapter -Fed R2R8 Ideales Ersatzkabel: Perfekt als oder für beschädigtes oder verlorenes OriginalkabelErsatzteile, langlebig und einfach zu montieren.Feine Verarbeitung und perfekter .Spezifikation:Passend: Für HD 25-sp, HD 222, HD 224, HD 230, HD 250, HD 250 Linear II, HD 414, HD 414 SL, HD 420, HD 420 SL, HD 425, HD 430, HD 440 II, HD 442 II, HD 450 II, HD 480 Classic, HD 480 -II, HD 480 II, HD 490 II, HD 520, HD 520 II, HD 530, HD 530 II, HD 540, HD 540 II , HD 560, HD 560 II KopfhörerMaterial: MetallFarbe: SchwarzPackungsinhalt:1 x Kopfhörerkabel

KopfhöRerkabel für HD25 HD560 HD540 HD430 HD250 KopfhöReradapter -Fed W4B8 Ideales Ersatzkabel: Perfekt als oder für beschädigtes oder verlorenes OriginalkabelErsatzteile, langlebig und einfach zu montieren.Feine Verarbeitung und perfekter .Spezifikation:Passend: Für HD 25-sp, HD 222, HD 224, HD 230, HD 250, HD 250 Linear II, HD 414, HD 414 SL, HD 420, HD 420 SL, HD 425, HD 430, HD 440 II, HD 442 II, HD 450 II, HD 480 Classic, HD 480 -II, HD 480 II, HD 490 II, HD 520, HD 520 II, HD 530, HD 530 II, HD 540, HD 540 II , HD 560, HD 560 II KopfhörerMaterial: MetallFarbe: SchwarzPackungsinhalt:1 x Kopfhörerkabel

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Portable 4:1 HF Shortwave Dipole Antenna Balun DIY Portable No Tune End Fed Half brand new and high quality Feature: Radio balance adopts large-size high-quality for HAM radio equipment It can easily produce high-performance balun to ensure efficient radio transmission and reception. It allows you to fully enjoy the fun of DIY. 4:1 balun is suitable for long-line antennas, with manual day adjustment or automatic day adjustment. Compact size , easy accessibility, suitable for outdoor use QRP stations and set up . Easy to erect and simple to use. Specifications: Maximum Power: 50W Material: Plastic and Metal Dimension: approx.5.2x5.2cm/2.05x2.05in Color: As pictures shown Quantity: 1 Pc Note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1 x 4:1 Balun (other accessories demo in the picture is not included)

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.

Description Description&Previewshipping&policyDescription:note: It is not recommended to buy parts if there is no hands-on ability Features: It is a single-band 80m-10m end-fed half-wave linear antenna. It is designed as a highly portable wired antenna that can be easily set up as an inverted V, horizontal, inclined or vertical radiator (in the case of higher frequencies). Your feeder line is essentially balanced, so there is no need for a separate feeder line. The high-impedance half-wave line is matched with your 50-ohm feed point through an integrated impedance matching toroidal transformer, and the rated power is 10W Use a high-voltage capacitor on the transformer primary with a specific radiator length to further expand and reduce SWR within the range of 80m-10m It is designed to be used without a tuner, and after optimizing the driven element, the SWR of any part of the frequency band is ? 1.2 Specification: Impedance: 50 ohm Weight: 35g Size: 100 x 71mm Packing includes: 1 x Unassembled Kit Preview: Thank you for your purchaseProblems? You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions: Shipping ? We will arrange shipping for you within 24 Hours after payment cleared except the holidays. ? We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost. Payments We accepts Paypal only If you have any questions about the payment,please contact us through eBay message. Import Duties In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.Terms & Conditions By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding. All pictures are for illustration purpose only and Colours may vary slightly. Our store obeys all eBay Rules and Policies.Returns Policy To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it. Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging. All shipping and handing charges are non-refundable Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items. Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.