Description
EAV21117 Extron MTP/HDMI U R Universal Receiver AC Adapter NOT Included Excellent condition! Guaranteed Against DOA • • • DESCRIPTION: The MTP/HDMI U R is a universal Twisted Pair Receiver that consolidates digital and analog video formats into a single product. It works in conjunction with the MTP/HDMI U T A D and HDMI 201 / DVI 201 transmitters to send HDMI or DVI over two twisted pair cables, and with an MTP Series transmitter to send all common analog video formats, from composite video to HDTV and high resolution RGB, as well as mono audio, over one twisted pair cable. The MTP/HDMI U R is HDCP-compliant, and receives bidirectional RS-232 signals through either twisted pair input, for remote control of a display device. It also includes separate variable level and peaking controls and automatic signal format detection for incoming MTP signals. FEATURES: ? Accepts digital and analog video formats, audio, and control signals over CATx cables — Standard UTP/STP cables provide an economical, easily installed cable solution ? Outputs: RGB on 15-pin HD, component video on 3 BNCs, S-video on 4-pin mini DIN, composite video on BNC, HDMI connector, and captive screw connectors for balanced or unbalanced dual mono audio and RS-232 ? HDMI Twisted Pair input compatible with HDMI 201 and DVI 201 Series Twisted Pair Transmitters ? MTP Twisted Pair input compatible with MTP Series Twisted Pair Transmitters, Switchers, and DAs, as well as MTPX and MTPX Plus Twisted Pair Matrix Switchers ? Automatically routes incoming video signals to appropriate output connectors ? Digital Output: - HDCP compliant - Supports data rates up to 1.65 Gbps per color - Supports EDID and HDCP transmission - Supports bidirectional RS-232 or IR signals ? Analog Output: - Supports RGBHV, HD component video, S-video, composite video, mono audio, and RS-232 - Separate variable level and peaking controls - Supports bidirectional RS-232 signals - Compatible with HDTV component video, bi-level or tri-level sync - Dual mono audio output - The MTP/HDMI U R outputs balanced or unbalanced dual mono audio signals ? LED indicators for source signal presence and power ? UL 2043 plenum rated - The MTP/HDMI U R meets UL 2043 for heat and smoke release, excluding power supply ? 1U, half rack width metal enclosure — The MTP/HDMI U R can be discreetly installed above a projector or behind a flat-panel display Specifications: MTP input Gain Unity Maximum resolution Analog Up to 2048x1080 or 1080p @ 60 Hz Signal transmission distance, analog HDMI digital input Maximum data rate 4.95 Gbps (1.65 Gbps per color) Maximum pixel clock 165 MHz Maximum resolution Digital Up to 1920x1200 or 1080p @ 60 Hz Signal transmission distance, digital Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.2 Video input Number/signal type MTP input 1 set of proprietary analog signals HDMI digital input 1 set of proprietary digital signals Connectors MTP input 1 female RJ-45 HDMI digital input 2 female RJ-45 Video output Number/signal type Analog output 1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) HDMI digital output 1 single link HDMI (or DVI-D*) NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output. Connectors Analog output 1 female 15-pin HD for RGB 3 female BNC for Y, R-Y, B-Y 1 female 4-pin mini DIN for S-video (Y/C) 1 female BNC for composite video HDMI digital output 1 female HDMI type A Nominal levels Analog outputs: 1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video Minimum/maximum levels Analog outputs: 0.8 V to 1.2 Vp-p Impedance Analog outputs: 75 ohms (during video output only) Return loss Analog outputs: <-30 dB @ 5 MHz (during video output only) DC offset Analog outputs: <±20 mV with input at 0 offset Sync — analog outputs Output type RGBHV, RGBS, component video (bi- or tri-level) Standards NTSC 3.58, NTSC 4.43, PAL, SECAM Output level 4.0 V to 5.0 Vp-p, unterminated Output impedance 87 ohms (24 mA) Polarity Positive or negative (selectable) Audio — from MTP input Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±1 dB THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level S/N >70 dB at maximum output (unweighted) Audio input — from MTP input, see MTP transmitters audio output specifications Number/signal type 1 set of proprietary analog signals Connectors 1 female RJ-45 Audio output — from MTP input Number/signal type 2 mono, balanced/unbalanced Connectors (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±1 dB channel to channel Control/remote — external device (pass-through) from the HDMI input Serial control port input/output RS-232 via (1) 3.5 mm, 3 pole captive screw connector Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND Control/remote — external device (pass-through, unidirectional or bidirectional) from the MTP input Serial control port input/output RS-232 via (1) 3.5 mm, 5 pole captive screw connector (3 poles are used) Baud rates Up to 38400 bps at up to 600 (183 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) Protocol Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none NOTE Protocol is mirrored between the transmitter and the receiver. Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND General Recommended cable type Shielded or unshielded MTP input CAT 5/5e/6 HDMI digital input CAT 5/5e/6, Extron STP201 NOTE Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance. Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts Power input requirements 12 VDC, 0.8 A Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Cooling Convection, no vents Thermal dissipation 18.1 BTU/hr Mounting Rack mount Yes, with optional 1U rack shelf Furniture mount Yes, with optional under-desk mounting kit Pole mount Yes, with optional projector mounting kit Enclosure type Metal Dimensions: Enclosure dimensions: 1.7 H x 8.75 W x 3.0 D (half rack wide) (4.3 cm H x 22.2 cm W x 7.6 cm D)(Depth excludes connectors.) Product weight: 0.8 lbs (0.4 kg) CONDITION: Excellent condition. GUARANTEED against DOA. Does NOT include any cables or other accessories.
Live search