Technics ST-500L Quartz Synthesizer LW/MW/FM Stereo Tuner Hifi Separate Vintage. Excellent bit of equipment. A few slight marks but good condition and works perfectly.

Technics EPA-A505 T4P Cartridge Pickup Tone Arm Unit for EPA-B500 w/ EPS-310MC Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed. The appearance is a beautiful product without any noticeable scratches.The cantilever is not broken or bent.Stylus tip and damper are in good condition. Specifications Arm unit for Technics EPA-B500 arm base unit. Type: Dynamic damping arm unit for plug-in connector cartridgeArm pipe: Titanium nitride (TiN) tapered pipeArm effective length: 250mmArm rear length: max. 75.5mm (from arm fulcrum)Overhang: 15mmHorizontal tracking error angle: +1°6(inner circumference of 30cm record), +2°6(outer circumference of 30cm record)Arm effective weight: 6g (without cartridge)Stylus pressure adjustment range: 1g to 1.5gCompatible cartridge weight: 6g Accessories EPS-310MC T4P MC CartridgeDedicated caseOriginal box Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Unità braccio pickup a cartuccia Technics EPA-A505 T4P per EPA-B500 con EPS-310MC Domo Arigato! Benvenuto, grazie per la tua visita. Descrizione Operazione confermata. Laspetto è un bellissimo prodotto senza graffi evidenti.Il cantilever non è rotto o piegato.La punta dello stilo e lo smorzatore sono in buone condizioni. Specifiche Unità braccio per unità base braccio Technics EPA-B500. Tipo: Unità braccio ammortizzatore dinamico per cartuccia con connettore a innestoTubo del braccio: tubo conico in nitruro di titanio (TiN).Lunghezza effettiva del braccio: 250 mmLunghezza posteriore del braccio: max. 75,5 mm (dal fulcro del braccio)Sporgenza: 15 mmAngolo di errore di tracciamento orizzontale: +1°6(circonferenza interna del record da 30 cm), +2°6(circonferenza esterna del record da 30 cm)Peso effettivo del braccio: 6 g (senza cartuccia)Intervallo di regolazione della pressione dello stilo: da 1 ga 1,5 gPeso della cartuccia compatibile: 6 g Accessori Cartuccia MC T4P EPS-310MCCustodia dedicataScatola originale Spedizione La spedizione è disponibile solo per lindirizzo registrato su eBay. La spedizione è entro Fedex O SME. Spedizione gratuita ritorna Politica di restituzione incondizionata Il servizio e la soddisfazione del cliente sono molto importanti per noi.Ho una politica di restituzione incondizionata se notificata entro 30 giorni dalla ricezione dellarticolo. Tutti gli articoli restituiti devono essere nella condizione originale.Tutte le richieste di reso devono essere effettuate entro 30 giorni dal ricevimento dellarticolo. Per favore contattami prima per il reso prima di rispedirmelo.Le spese di spedizione della merce restituita sono a carico dellacquirente. Acquirenti internazionali Notare che:I dazi doganali, le tasse e le spese non sono inclusi nel prezzo dellarticolo o nelle spese di spedizione.Queste spese sono a carico dellacquirente.Si prega di verificare con lufficio doganale del proprio paese per determinare quali saranno questi costi aggiuntivi prima dellofferta/acquisto.Queste spese vengono normalmente riscosse dalla società di spedizione (spedizione) o al momento del ritiro dellarticolo: non confonderle con spese di spedizione aggiuntive.Non contrassegniamo i valori della merce al di sotto del valore né contrassegniamo gli articoli come regali: le normative governative statunitensi e internazionali vietano tale comportamento. Mi dispiace, ma non possiamo organizzarlo perché è illegale in Giappone.Grazie.

ShippingListed items are stored in our warehouse. Twice during the week I go to the warehouse and bring the purchased items to the office. The goods are inspected and cleaned to make sure they are in good working order. They are then packaged to prevent breakage. Therefore, it takes 3 to 7 days to ship. Please allow plenty of time for your purchase.We always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal.About Importers ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.Thank you for your understanding.

Technics EPA-A250 Titanium Nitride Arm W/ EPA-B500 Bass in Excellent ConditionItem Description This unit is in excellent condition including a few minor scratches and scuffs on the body. (please see photos). This tone arm has been checked and tested confirm working perfectly. Shipping Policy We ship the item via DHL with a tracking number. Item will arrive approximately one week. Duties and Taxes Policy Import duties, taxes, and other charges which are not included in the item price or shipping charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be before bidding or buying. Except in the case of faulty or damaged items, refunds do not include any return shipping or shipping charges. Your return shipping charge will be deducted from your refund if you receive any.

Audio Mai 1980. Im Heft sind unter anderem folgende Themen, Tests bzw. Gerätebesprechungen zu finden. Cassettenrecorder: Akai GX-F 90 JVC KD-A 77 Offener Brief an Günter Verdin Plattenspieler: Micro RX-5000 Tonarme: Audio Technica AT-1100 Micro MA-707 SME 3009/III S Technics EPA-500 Vollverstärker: Dual CV 1200 Grundig V 2000 Harman/Kardon HK 503 Pioneer SA-608 Sony TA-F 40 Technics SU-8055 Anlagenberatung: HiFi-Anlage zusammenstellen Musik: Wolle Kriwanek Gordon Lightfoot Ist Donald Duck musikalisch? Viele ausführliche Plattenbesprechungen Anzeigen aus der damaligen Zeit und mehr Falls nicht ausdrücklich erwähnt, sind die Hefte immer ohne CD und sonstige Beilagen. Die Hefte sind auch alle mehr oder weniger gebraucht. Es können evtl. Markierungen bei der Announcen vorhanden sein. Auch ist vereinzelt der Adressaufkleber noch ganz bzw. teilweise vorhanden, es können auch noch Reste am Heft sein. Preisausschrauben wurden in der Regel ausgefüllt bzw. auch ausgeschnitten und sonstige Vorlagen zum Herausschneiden sind in der Regel entfernt. Ab und zu ist auch eine Plattenkritik ausgeschnitten. Abholung möglich oder Versand auf Kosten des Käufers. Versand erfolgt nach Zahlungseingang. Bezahlung muss innerhalb einer Woche erfolgen oder nach Vereinbarung mit mir. Abholung bevorzugt. Erfüllunsort ist 69115 Heidelberg Nach der allgemeinen Regelung des Bürgerlichen Gesetzbuches (BGB) trägt grundsätzlich der Käufer das Risiko des Verlusts und der Beschädigung der Ware auf dem Transportweg (§ 447 Abs.1 BGB). Der Versand der Ware geschieht also auf Risiko des Käufers. Dieses Angebot ist privater, nicht gewerblicher Natur. „Verkauf gebrauchter Ware von Privat“. Keine Haftung für Tippfehler. Mit der Abgabe eines Gebotes verzichten Sie auf die gesetzlichen Garantie- und Gewährleistungsansprüche sowie auf Ihr Rückgaberecht (ausser bei Abholung).

Technics EPA-250 EPA-B500 Dynamic Damping Universal System Tone Arm Pickup Arm #3 Domo Arigato! Welcome, Thank you for your visit. Description Universal type system tone arm that combines the EPA-B500 tone arm arm base unit and the EPA-A250 tone arm unit. Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *Turntables and other equipment shown in the photo, other than the EPA-250 EPA-B500, are for presentation purposes only and are not included in the product. *The black pedestal of the base is for photographic purposes only and is not included. Specifications < Tone Arm Base Unit EPA-B500 >Type: Arm replacement type arm baseBearing structure: Gimbal suspension systemHeight adjustment range: 42mm-62mm (from base mounting surface to pipe center), helicoid: 20mmInitial sensitivity: 7mg or less (horizontal, vertical)Output cord DC resistance: 39.5m?/mOutput cord capacitance: 41.5pF/mArm base mounting hole: ?62mm < Tone Arm Unit EPA-A250 >Type: Dynamic damping type arm unitArm effective length: 250mmArm rear length range: max. 93mm (from arm fulcrum)Overhang: 15mmHorizontal tracking error angle: +1?6(inner circumference of 30cm record), +2?6(outer circumference of 30cm record)Arm effective weight: 14g (without cartridge)Stylus pressure adjustment range: 0 to 2gHead shell weight: 7.5gCompatible cartridge weight: 6g~8g, 3g~6g(with shell weight), 10.5g to 12.5g (with auxiliary weight) Accessories PHONO cableArm fixing screws x 3Instruction Manual (copy) (Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

SpecificationsPower output: 30 watts per channel into 8? (stereo)Frequency response: 20Hz to 20kHzTotal harmonic distortion: 0.1%Damping factor: 60Input sensitivity: 2.5mV (MM), 150mV (line)Signal to noise ratio: 76dB (MM), 90dB (line)Channel separation: 50dB (line)Output: 150mV (line)Speaker load impedance: 4? to 16?Dimensions: 430 x 125 x 315mmWeight: 6kgYear: 1995Perfect working order and has been professionally cleaned inside and out to ensure perfect performance and top condition throughout. Cosmetic condition: A few cosmetic imperfections but in very good condition overall. Comes without remote but can be operated without. Comes with the power lead. Photos:Please have a good look at the photos as they are of the actual item for sale unless otherwise stated and will give you a good idea of the item condition. They will also show you any included accessories such as remote control. If the item comes with any accessories or original box it will be included in the photos and item description, if its not then assume it isnt included.Delivery:Free next working day delivery (unless otherwise stated) within mainland UK. For all other destinations, please ask for a delivery quote or use eBays GSP shipping programme. Items will be packaged to a high standard to avoid damage in transit. Returns:Returns accepted within 14 days, the item must be in the same condition as it was prior to original sale. Buyer pays for return delivery costs. Items not as described:If you receive your item and feel the item is not a described, please get in touch so that we can work together to resolve the issue. Please give us the chance to put it right before leaving feedback because sometimes issues cant be avoided but we always strive to ensure the customer is happy.

Technics EPA-250 EPA-B500 Dynamic Damping Universal System Tone Arm Pickup Arm. Condition is Used. there is a small hairline crack on the plastic counterweight tightener.....no effect on performance..... Shipped with USPS Ground Advantage.

Technics SL-PG500a CD Player Genuine Remote Vintage Hifi separate TESTED - POST. Good condition Tested and working Sounds great Remote Optical and analogue out Some minor marks Fast and safe shipping

NOS (New Old Stock) Technics R&B Series EPA-A501E tonearm wand for Technics EPA-500 interchangeable tonearm system. This model is for use with extra high compliance cartridges. Never used, I bought a collection of three different Technics EPA-500 system arm wands many years ago and never ended up even trying this one out, so its still new in its original, protective display case. The condition is new but original box is tore and falling apart.

Condition DescriptionThe arm is in a beautiful state with no noticeable scratches and gloss. Accessories such as cables are in good condition with no significant damage. Considering the aging, we judge it as a beautiful item. It will be a used item that has been used for many years. Please note that some scratches / dullness / feeling of use due to aging / use. ? Operation We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. ? Accessories ? Lead wire x 4 ? PHONO cable (Technics) ? Arm fixing screw x 3 ? Instruction manual (copy) ? Template (copy) ? Transportation spacer Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Vintage 80s Technics SU-500 Hi-fi Separate Amplifier Phono Input 80s SERVICED* Excellent build and sound quality as you would expect from a vintage 80s Technics amp made in Japan. SERVICED*: At the time of listing all buttons, switches, sockets and dials have been serviced with contact cleaner to ensure smooth and accurate operation. The unit has been fully function tested and is working perfectly on all inputs and outputs. Specifications Power output: 40 watts per channel into 8 (stereo) Frequency response: 5Hz to 70kHz Total harmonic distortion: 0.05% Damping factor: 50 Input sensitivity: 2.5mV (MM), 150mV (line) Signal to noise ratio: 71dB (MM), 90dB (line) Channel separation: 45dB (line) Output: 150mV (line) Speaker load impedance: 8 to 16 Dimensions: 430 x 86 x 240mm Weight: 4.7kg See pictures for the best description of item and cosmetic condition. Please note there are some light scratches scuffs and marks but nothing major. Please note there is a small chip in the plastic of one of the Surround Speaker Terminals. This does not have any impact on the performance of the terminal. Check out my other listings for similar items Thanks for looking Andy Stock Ref: T. 500 58.47.20.7.

Superb TECHNICS EPA-500 Titanium System Tonearm Absolutely pristine example of this very special and versatile system tonearm that comprises EPA-B500 arm base and EPA-A501H interchangeable arm unit, together with original accessory items and fittings. Design and engineering are exemplary and the interchangeable titanium EPA-A500H arm unit specifically provides optimum matching and performance for cartridges of 4.5 to 7.0 grams weight and low to medium tracking force, ie. 1.00 to 2.00 grams. Uniquely the EPA-500 system utilised a number of interchangeable titanium arm units of different effective mass to permit optimum matching for cartridges requiring particular tracking force requirements, ranging from a low of 0.75 to a high of 3.0 grams. Such units are frequently available for purchase on eBay and elsewhere.---------------------------------------------------------------------------------------------------------------------NB: I will be listing various EPA-A501 interchangeable arm units from my collection in the coming months--------------------------------------------------------------------------------------------------------------------- Technics engineers really knew their field: their skill and flair is clearly evident in EPA-500s revolutionary design, which incorporates many outstanding technical features and attributes, including:tapered titanium-nitride arm tube for maximum rigidity to weight ratio and lowest effective massultra precise, minimum friction gimbal bearing suspension for surest tracking performance under all playback conditionsdyno-magnetic damping system to control tonearm/stylus resonance for surest tracking of lowest bass frequenciesmicrometric VTA adjustment to set optimum tonearm high for purest playback of treble frequenciesfrictionless and precise antiskating device for accurate and predictable arm-bias compensationoutput cable with unique combination of low resistance as well as low capacitance for optimum signal transferSecifications: Effective length: 250 mmOverhang: 15 mmTracking error angle: +1.1 deg @ inner groove, +2.1 deg @ outer grooveEffective mass: 8 gSuitable cartridges: 4.5 - 7.0 grams weight, 10 - 14 cu (100 Hz dynamic)Height adjustment: 44 - 64 mm (base mounting to cartridge mounting surface)Pivot suspension: axis frictions less than 7 mgMaximum height: 88 mmMaximum rear overhang: 85.5 mmBase underhang: 64 mmMounting hole: 62 mm diameterMounted weight: 790 gramsOutput cable: 1.25 m long, 39.5 m?/m, 41.5 pF: gold plated RCA phono plugs Owner reviewsTechnics EPA 500 by BrownlowI did not know what to expect, however, I am one happy fellow. Absolutely excellent, if you are in the market for a used tonearm, Im sure you wont be disappointed with listening with one of these. by Peter4103Absolutely superior tonearm. I have had my share of tonearms, but this beauty is certainly the best so far. And very easy to install and use. Make sure to follow the tonearm compliance, which is easily found in the chart on the last page of the manual. There are various arms for various different carts. To swap the tonearm is as easy as removing a headshell. However, mounting a new cart is a bit more tricky due to the fact that the whole tonearm is a bit more difficult to handle than just the headshell. But once installed, it is a great experience. The EPA 500 is very hard to find though in good condition. by hullevadIt makes the patience and effort worth matching cartridge and arm, if possible.I were on the lookout for a M armtube for 5 years and got a NOS, matches my Audio Technica ART 7 perfectly. Armtube Cu must match that of the cartridge exactly according to japanese data (100hz). The best arm? Yes when matched with a proper cartridge. by marco_63Superb tonearm! by Ronald de CarvalhoFabulously made and superbly performing tonearm from one of Japans most accomplished and innovative makers of audio equipment. by florestanSuperb tonearm, executed with outmost care in every details, from the lock system to the antiskating device. The decoupled and damped counterweight is a thing of beauty and really is effective. This arm deserve to be used in any very high quality turntable, Technics SP10 of course but also other maker: in my current turntable it is really working beautifully as it did on a friends Micro Seiki. The possibility to interchange between a number of arm units to accommodate cartridges of different weight & compliance is also very interesting and as far as i know only offered now by Moerch. Very highly recommended.

Technics SH-100 High End Headshell shell for B-500 EPA-100/100 mk2 etc 9.5 g.

Technics SH-100 High End Headshell shell for B-500 EPA-100/100 mk2 etc 9.5 g.

NOS (New Old Stock) Technics R&B Series EPA-A501E tonearm wand for Technics EPA-500 interchangeable tonearm system. This model is for use with extra high compliance cartridges. Never used, I bought a collection of three different Technics EPA-500 system arm wands many years ago and never ended up even trying this one out, so its still new in its original, protective display case. The condition is new but original box is tore and falling apart.

Technics SH-100 headshell for phono cartridge EPA 100 EPA 500 tonearm turntable. Technics SH-100 black headshell for sale. This is Japan made shell with original Technics headshell leads. This shell is standard for EPA100and EPA 500 tonearms. Weight: 9.5 g Sell: $55 Shipping is $4.40 inside USA with first class USPS Ebay shippingInternational shipping is$18 with first class International USPS Ebay shipping service.

You are looking at the *Technics EPA-100MK2/MKII EPA-500 Original Genuine Phono Cord Cable Condition: May have a few minor signs of use. *Dont forget to check our other items to view more cool stuff. Well be glad to combine shipping! Express Shipping : 3 - 10 days. Standard Shipping : 7 -14 days. Economy Shipping : 10 - 28 days. Duties and Local Tax are not included.These charges are the buyers responsibility. if you have any question, please feel free to contact me!

Technics EPA-250 EPA-B500 Dynamic Damping Universal System Tone Arm Pickup Arm #2 Domo Arigato! Welcome, Thank you for your visit. Description Universal type system tone arm that combines the EPA-B500 tone arm arm base unit and the EPA-A250 tone arm unit. Operation confirmed with the following contents. Output from both channels. Lifter descent speed. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. For other appearances, please refer to the photo. *Turntables and other equipment shown in the photo, other than the EPA-250 EPA-B500, are for presentation purposes only and are not included in the product. *The black pedestal of the base is for photographic purposes only and is not included. Specifications < Tone Arm Base Unit EPA-B500 >Type: Arm replacement type arm baseBearing structure: Gimbal suspension systemHeight adjustment range: 42mm-62mm (from base mounting surface to pipe center), helicoid: 20mmInitial sensitivity: 7mg or less (horizontal, vertical)Output cord DC resistance: 39.5m?/mOutput cord capacitance: 41.5pF/mArm base mounting hole: ?62mm < Tone Arm Unit EPA-A250 >Type: Dynamic damping type arm unitArm effective length: 250mmArm rear length range: max. 93mm (from arm fulcrum)Overhang: 15mmHorizontal tracking error angle: +1?6(inner circumference of 30cm record), +2?6(outer circumference of 30cm record)Arm effective weight: 14g (without cartridge)Stylus pressure adjustment range: 0 to 2gHead shell weight: 7.5gCompatible cartridge weight: 6g~8g, 3g~6g(with shell weight), 10.5g to 12.5g (with auxiliary weight) Accessories PHONO cableArm fixing screws x 3Instruction Manual (copy) (Japanese)Template (copy) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.

Condition DescriptionThe arm is in a beautiful state with no noticeable scratches and gloss. Accessories such as cables are in good condition with no significant damage. Considering the aging, we judge it as a beautiful item. It will be a used item that has been used for many years. Please note that some scratches / dullness / feeling of use due to aging / use. ? Operation We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. ? Accessories ? Lead wire x 4 ? PHONO cable (Technics) ? Arm fixing screw x 3 ? Instruction manual (copy) ? Template (copy) ? Transportation spacer Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Condition DescriptionThere are no noticeable scratches on the arm and it is glossy / glossy and beautiful. There is no major damage to the weights and cables. Considering the aging, we judge it as a beautiful item. motion We have confirmed the operation with our equipment. ? Output from both channels ? Lifter descent speed ? Each adjustment point, operation feeling ? Height adjustment, etc. There is no problem in operation. accessories ? Lead wire x 4 ? Dedicated PHONO cable (Technics) ? Arm fixing screw x 3 ? Instruction manual (copy) ·template ? Bundled Items All you can see on the picture will be included in a set of a package. Please refer to the pictures for more details. Please check the pictures and dont hesitate to ask any questions about the item. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by EMS(Japan Post) or International Priority(FedEx). I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in Paypal. Please note that any address not registered in Paypal is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

NOS (New Old Stock) Technics R&B Series EPA-A501E tonearm wand for Technics EPA-500 interchangeable tonearm system. This model is for use with extra high compliance cartridges. Never used, I bought a collection of three different Technics EPA-500 system arm wands many years ago and never ended up even trying this one out, so its still new in its original, protective display case. The condition is new but original box is tore and falling apart.

Technics SA-EH500 Stereo Tuner Amplifier Spare & Repair. Selling for parts When switched on, it switches itself off straight away. Please note there is no power lead Please note, shipping off the UK mainland, Republic of Ireland, Northern Ireland and other remote areas may incur extra postal charges so please contact me before purchasing. Thankyou