Elac 794E +DN795E Original Van Den Hul Bor Pickup NOS Nude Shure
- Condition: New: Other
- Price: 412.41 EUR
- Status: unsold
- Item number: 175713905343
- Seller: vinylistica-viola (4621|99.0%)
- Seller information: Commercial
- Item location: Leipzig
- Ships to: Americas
- Shipping: 15,0 EUR
- on EBAY
-
Description
VAN DEN HUL - Elac EMC1 - Elac 796 Hsp - Elac 333 Brother VERIFIED DEALER GOODS WITH WARRANTY!! Hello my dear vinylists!! SELL HERE AN ULTRA RARE PICKUP SYSTEM FROM KIELER HIGH END MANUFACTURER ELAC WITH ORIGINAL NEEDLE + BORON CANTILEVER!!! CONDITION: All original pictures - U get what U See! no bullshit!!!! Pickup is extremely good, as can be seen in the pictures, at most small scratches, nothing really countable, clean contacts, as far as I can understand it is in the direction of new!!. It has no dirt, verdigris or any damage. Its the way you want a vintage pickup, considering its age, its hardly possible better!!! Was measured, channels work clean! It comes with an original Elac needle! And that is certainly a highlight, namely NoS Neu Mint!! The marking color is still absolutely fresh, like it came from the Kiel factory!!! The needle is definitely new, see the ORIGINAL microscope pictures. Only the second picture is professionally created, unfortunately I dont get it that artistic and well done yet! In direct comparison, the needle does not look so far away from the 796, with the legendary Van Den Hul II cut. There is a variant that is elliptical and one that is elliptical, the parabola is elliptical, at first I thought it meant a biradial, but that doesnt work because it has a 6x50my cut. Unfortunately, I no longer know which color and which print goes with which. Be that as it may, the one in the photos looks extremely sharp, I think it should conjure up a beautiful sound in the world. Anything else would surprise me... The diamond is therefore super clean and the cantilever couldnt look much better either, clearly new! Collectors condition in my opinion. The cantilever is slightly odd, barely visible to the eye. It should therefore also play absolutely accurately! Test that again briefly, but actually I always leave new ones unused, but I want to avoid the doubters. If nothing changes here, it just sounds great!! The diamond stands neat and straight. In view of the rather tense needle situation, which has been affecting Elac for a long time, at least the originals, an incredible stroke of luck. In the state of being sure not to get that often anymore. Please remember that it is new and therefore needs a few laps to warm up, approx. 30 hours until it unfolds its absolute power. The maximum should be 1.5p, from there you can fantasize, depending on whether it is the normal ellipse or the even sharper one, you will then see that it can be either 1.25 or even 0.75p you approach it carefully. Whereby too much is always better than too little, since a needle dancing around in the groove that moves like a weasel the flanks of your beautiful. discs injured. More is clearly better than too little ;-) Nevertheless, due to the lower tracking forces, much less vinyl and needle consumption is recorded! Since the sharper cuts with real natural diamonds wear out less quickly anyway, you have peace and bombastic sound for a long long time!!! Assume 1000 to 2000 hours for the 6x50my grinded one. You should then use the time accordingly to fish a new one out of the bay, so that you can still have fun with it after the time has passed!! PS: After research, I assume with high probability that it is the Parabola Ellipse, since there is no other designation with the compliance on the type plate, which looked a bit too sharp for an already good 6x18!!! Please look at the ORIGINAL PICTURES and convince yourself of the quality I describe - U GET WHAT U SEE - NO BULLSHIT!!!! There is nothing more to say, a perfect system!! Once again, clearly, perfect high-end vintage!!! Certainly one of the very few that still exist in this condition. Audiophile Love!!! DEALER GOODS WITH WARRANTY - CHECKED AND CLEAN QUALITY!!!! ALL AT THE DEALER! SO NO THIBBLING HOW THE DEVICE COMES IN!! BUY FROM ME; BUY SAFE! Product description: Well, as already described, it is a cantilever made of boron with a sharp parabola ellipse. I still havent found out exactly what that is, but 5x50my already tells me that something is at work here, which basically comes quite close to a Vdh, which in principle cant be wrong. In addition, laminated pole cores like the Shures. With all the magic of Kiel, it results in a fine piece, a top system just on the threshold of top class, as an established audio magazine wrote in the days of analogue media. In terms of sound, the Elacs are more on the warm side, they fall off slightly in the treble, but without concealing details. I like that very much, an alternative to the Audio Technicas. Friends of Grado, Golding etc. So should listen here and treat yourself to this fine thing, Im very curious. Lets see how long I can resist... ?Ÿ˜€?Ÿ˜€?Ÿ˜€?Ÿ?¼?Ÿ?¼?Ÿ?¹?Ÿ?¹?Ÿ˜Š?Ÿ˜Šâ?ï¸? DATA: Generally: Manufacturer: Elac Model: ESG-795 E Type: pickup Years of construction: 1980 - 1984 New price approx.: 386 DM Technical specifications: Principle: MM Frequency response: 10 - 25,000 Hz Channel Separation: >26dB at 1KHz Channel Balance: <1.5dB Crosstalk attenuation: Output voltage: 5.6 mV at 5.6 cm/s and 1 kHz Termination resistance: 47 KOhm Induction: 450mH Needle type: Elliptical 6/18µm Recommended tracking force: 15 mN (needle D 795 E/20) or 10 mN (needle D 795 E/30) or 7.5 mN (needle D 795 E/40) Needle flexibility: 20 µm/mN (needle D 795 E/20) or 30 µm/mN (needle D 795 E/30) or 40 µm/mN (needle D 795 E/40) static Contents: Original Elac ESG 794 pickup cartridge Original Elac DN795E needle stylus Other Wanted Pickups Shure Ultra VST5 Shure V15VxMR Shure Me97HE with genuine N97xE NOS needle Shure Me97He with Original Hxperellipse Shure 2/3 Shure M44-7/M44G Ortofon Concorde DJ & Hifi Broadcast E and much more. Different Philips OMB 10 20 Audio Technica ATE90 with beryllium cantilever Technics 205EX WITH Titan Cantilever Technics 206C Various Grados + Duals Ortofon 2M Red Blue Audio Technica - AT20Sla SS Limited Edition - 13eav - AT12XE + the best spinners from Rega, Music Hall, Pro-Ject, Micro Seiki & much more Options: Vivid HE - our needle cleaner, specially made in a small factory, to extend the life. Made from ultrapure water from a medical environment to leave absolutely no residue on the good piece. We are particularly proud of the applicator, as it finds the right balance between hard, good cleaning and flexibility, i.e. gentle on delicate areas. Plus a top phono screw set for €9.99 in environmentally friendly, reusable packaging! Of course degaussed!! Tonearm scales that make the annoying adjustment of the balance weight, where you are always unsure whether it is right anyway, unnecessary. spinner: Various Dual, Thorens, Technics, Marantz, Onkyo , Grundig, sony and many more. never everything in the Bay or somewhere else - whoever asks wins!!! Rest: AMPLIFIER WITH PHONO USED HIFI BOXES TECHNICS DJ 1210 HEADPHONES TECHNICS DJ 1200 HEADPHONES HEADPHONES SENNHEISER - HD25 HIGH RES BLUETOOTH HEADPHONES write me than i create a personalized item So top system, with warranty - so buy without regrets, that doesnt last long!!! ALL SUBJECT TO AVAILABILITY WE ALSO LIKE TO LISTEN TO YOUR SUGGESTIONS ABOUT YOUR OLD EQUIPMENT IMPORTANT ABOUT THE PROCESS: PLEASE READ THIS!!! Proper packaging is a matter of course. From experience of almost 20 years, there is definitely a high-quality packing method. If available, transport screws are tightened, plates and counterweights are removed and packed separately. Wherever possible, we use old materials for environmentally friendly reasons in order to use as little plastic as possible. We see it as our obligation not only to protect the black circle, but also the blue circle and to avoid waste wherever possible. If you do not want this, for whatever reason, please let us know in advance. Im happy to help if you have any problems! Items are concentrated packed on Fridays for efficiency. I would also like to point out that quality and fast delivery times do not go together. Give us the time that you certainly gave yourself when making the purchase decision and let us deliver the quality that you want and deserve. Just enjoy the anticipation!!! Stress, hectic and fast, fast do not allow quality!!! Ask a Diamond ;-) WE DELIVER TO YOU: Turntable deck turntables used and new, cartridges used & new, Van den Hul, Dual CS 731Q, Dual 721, Dual 704, 701, 601, 626, 510, 491, Pro-Ject, Saba, Telefunken, Yamaha, Golden One, Onkyo CP-1057F, Magnetic Cartridge, Ceramic Cartridge, Stylus, Needles, Headshell, Audio Technica MM & MC, Technics 1210 MK2, MK1, MK3, M5G, 1410, 1700, 1900, 2000, 5310, Linn, Sansui, Revox, Luxman, Kenwood, Bang & Olufson, Marantz, sonyStanton , Pick up, Cellule Polyvalente, Testina fonografica Diamond stylus, Replacement stylus, Pointe de Lecture, Ersättningsnål, Reservenaald, ???, Aguja, Puntina, Aiguille Pitch Belt, phonograph, record playerWell, as already described, it is a cantilever made of boron with a sharp parabola ellipse. I still havent found out exactly what that is, but 5x50my already tells me that something is at work here, which basically comes quite close to a Vdh, which in principle cant be wrong. In addition, laminated pole cores like the Shures. With all the magic of Kiel, it results in a fine piece, a top system just on the threshold of top class, as an established audio magazine wrote in the days of analogue media. In terms of sound, the Elacs are more on the warm side, they fall off slightly in the treble, but without concealing details. I like that very much, an alternative to the Audio Technicas. Friends of Grado, Golding etc. So should listen here and treat yourself to this fine thing, Im very curiouWell, as already described, it is a cantilever made of boron with a sharp parabola ellipse. I still havent found out exactly what that is, but 5x50my already tells me that something is at work here, which basically comes quite close to a Vdh, which in principle cant be wrong. In addition, laminated pole cores like the Shures. With all the magic of Kiel, it results in a fine piece, a top system just on the threshold of top class, as an established audio magazine wrote in the days of analogue media. In terms of sound, the Elacs are more on the warm side, they fall off slightly in the treble, but without concealing details. I like that very much, an alternative to the Audio Technicas. Friends of Grado, Golding etc. So should listen here and treat yourself to this fine thing, Im very curiou
Live search