Elac Debut 1.0 atmos speaker (single). Good cosmetic condition with only minimal signs of use (see photos). Excellent working condition. Selling because of new system.

Full DescriptionAtmos CompatibleFew speakers have garnered such critical acclaim as the original Debut Series by ELAC. They established a new value proposition, with build quality and performance never before attainable at such an affordable price. Debut “changed the game,” and now it’s changed again with the Debut 2.0 Series—proof that ELAC can’t leave well enough alone. Redesigned from the ground up, they sound even more remarkable than the speakers that sparked the revolution in high-end sound.Dolby Atmos technology expands the sonic landscape, creating a true 3-D space that you’ve got to hear to believe. With Dolby Atmos-enabled AV receivers and processors, simply add the Debut A4.2 to the top of your bookshelf or floorstanding speakers to achieve dimensionality that puts you in the middle of the music and the action.New Tweeter with Wide-Dispersion WaveguideA new silk-dome tweeter features a wide-roll surround and takes response up to 35,000 Hz for even more lifelike high frequencies. The waveguide improves directivity control and eliminates the diffraction modes inherent in traditional box enclosures.New Woven Aramid-Fiber WooferThe revised shape of the aramid cone offers even greater stiffness and damping, far superior to polypropylene or paper. The added strength allows more flexibility in design to achieve a smoother, extended low-frequency response.New Cabinets with Easier PlacementThick MDF cabinets with a luxurious black ash vinyl finish are larger, and internally braced for greater stiffness and strength, greatly reducing cabinet vibrations which cause unwanted coloration. On the Bookshelf and Center Channel, moving the bass port to the front of the cabinet means placement against walls or in bookshelves won’t compromise performance.Optimized Center SpeakersRecognizing that in a multi-channel system the majority of sound comes through the center speaker, we have optimized sensitivity and impedance to minimize the power requirement from the AV receiver, maximizing dynamic impact from lower cost receivers.Speaker typeCoaxial, SealedTweeter1 x 0.5-inch Polymer DomeWoofer1 x 4-inch Woven Aramid-fiber ConeCrossover Frequency5,000 HzFrequency Response180 to 20,000 HzSensitivity85 dB at 2.83 v/1mRecommended Amplifier Power20 to 80 wpcNominal/peak Power Handling50 / 80 wpcNominal Impedance6 ?; minimum 5.1 ?Binding Posts5-way metalMagnetic ShieldingNoCabinet FinishesBlack Ash vinylDimensions W x D x H180mm x 234mm x 125mmNet Weight (each)5.5 lb / 2.5 kg

Elac Debut 2.0 A4.2 Atmos Speakers Black Open Box But Never Removed (Pair).

Good condition. Slight scratching on one edge of each speaker. Not very noticeable.Great for Dolby Atmos height channels in any room! SpecsSpeaker type: Coaxial, sealedTweeter: 1 x 0.5-inch polymer domeWoofer: 1 x 4-inch woven aramid-fiber coneCrossover frequency: 5,000 HzFrequency response: 180 to 20,000 HzSensitivity: 85 dB at 2.83 v/1mRecommended amplifier power: 20 to 80 wpcNominal/peak power handling: 50 / 80 wpcNominal impedance: 6 ?; minimum 5.1 ?Binding posts: 5-way metalMagnetic shielding: NoCabinet finishes: Black Ash vinylHeight: 4.92 in / 125 mmWidth: 7.09 in / 180 mmDepth: 9.21 in / 234 mmNet weight (each): 5.5 lb / 2.5 kg

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair.

Both speakers in perfect unmarked condition.

Elac Debut Model DA41-BK Dolby Atmos Speakers Pair. Condition is Used. Collection in person only.

Brown Ink Pen - eqw9598

Both speakers in perfect unmarked condition.

In excellent like new condition. Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf

Elac Debut A4.2 Atmos Speakers. Immaculate condition, complete with original packaging and instructions   Although billed as upfiring I used them as height speakers in a 7.1.4 setup. Sounded great, in fact better than what I’ve replaced with. But my new ones have greater partner approval. I had them matched with B&W floor mounters. Works well too as upfiring from either on top or off to the side UK bidders only. Specifications With Dolby Atmos-enabled AV receivers and processors, simply add the Debut A4.2 to the top of your bookshelf or floorstanding speakers to achieve dimensionality that puts you in the middle of the music and the action. Woven Aramid-Fiber Woofer Woven aramid fiber offers a superior stiffness-to-weight ratio and damping over common polypropylene or paper cones. The added strength allows more flexibility in design to achieve a smooth, extended low-frequency response. Dolby Atmos Certified This speaker is designed to sit on top of a traditional floorstanding or bookshelf speaker to add a height dimension to your home theater system without the need for in-ceiling speakers.* Custom Concentric Driver Designed by Andrew Jones, this concentric driver delivers an exceptional audio experience and offers a smoother, more extended response and better directivity control over conventional full-range drivers Intricate A custom crossover with audio-grade components has been designed to ensure smooth transition between drivers A4.2 SPECIFICATIONS Speaker TypeCoaxial, Sealed Tweeter1 x 0.5-inch Polymer Dome Woofer1 x 4-inch Woven Aramid-fiber Cone Crossover Frequency5,000 Hz Frequency Response180 to 20,000 Hz Sensitivity85 dB at 2.83 v/1m Recommended Amplifier Power20 to 80 wpc Nominal/Peak Power Handling50 / 80 wpc Nominal Impedance6 ?; minimum 5.1 ? Binding Posts5-way metal Magnetic ShieldingNo Cabinet FinishesBlack Ash Vinyl Dimensions (H x W x D)125 mm x 180 mm x 234 mm (4.92 x 7.09 x 9.21)

Both speakers in perfect unmarked condition.

Dolby’s solution for adding height channels to an Atmos-capable home cinema system where mounting speakers in or on the ceiling is not possible. Elac’s A4 speakers are designed to sit on top of the front or rear speakers and bounce the height channel off the ceiling and down to the listening position, creating the illusion that the sound is coming from speakers in the ceiling. Please note: These speakers rely on bouncing the height channel from a flat, hard ceiling. They will provide little or no height effect from a textured ceiling. More info in Dolby’s Atmos for Home Theatre guide: https://www.dolby.com/siteassets/technologies/dolby-atmos/atmos-installation-guidelines-121318_r3.1.pdf Condition: Mint, as new.

Both speakers in perfect unmarked condition.