TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5537 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 11,4/10,6 (21,3/20,1) 107/104 5510 RT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 10,3/11,4 (19,4/20,9) 98/100 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5538 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 14,9/14,1 (25,9/24,3) 118/112 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 11,9/9,2 (20,7/17,0) 92/84 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES 10,2/12,3 (19,7/22,6) 104/110 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES SMALL RING GETTER F8F3 code 8,5/8,0 (15,5/15,2) 72/59 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

Normal 0 21 false false false DE X-NONE X-NONE Natürlich Versandrabatt beim Kauf weiterer Artikel wenns möglich ist siehe Bilder Bei Fragen gern Mailen Da es sich um einen Privatverkauf handelt, übernehme ich keinerlei Haftung oder Gewährleistung für das Produkt. Die Rücknahme ist ausgeschlossen

Normal 0 21 false false false DE X-NONE X-NONE Natürlich Versandrabatt beim Kauf weiterer Artikel wenns möglich ist siehe Bilder Bei Fragen gern Mailen Da es sich um einen Privatverkauf handelt, übernehme ich keinerlei Haftung oder Gewährleistung für das Produkt. Die Rücknahme ist ausgeschlossen

Normal 0 21 false false false DE X-NONE X-NONE Natürlich Versandrabatt beim Kauf weiterer Artikel wenns möglich ist siehe Bilder Bei Fragen gern Mailen Da es sich um einen Privatverkauf handelt, übernehme ich keinerlei Haftung oder Gewährleistung für das Produkt. Die Rücknahme ist ausgeschlossen

Une paires (2) ECC82 / 12AU7 MINIWATT - DARIO Fabrication : HOLLANDE USINE : HEERLEN ANNÉE de fabrication :1962 Codes tubes identiques : >2I2 et >2I2 Tubes neufs testés : METRIX U61 Valeurs fabriquant 100% = 10,5ma/ 10,5ma , 2,2ma/v , 2,2ma/v @250/--8,5 Valeurs METRIX U61 tube 1 = 10 ma/ 10,5ma , 2,2ma/v , 2,5ma/v @250/--8,5 Valeurs METRIX U61tube 2 = 10,5ma/ 10 ma , 2,5ma/v , 2,5ma/v @250/--8,5 EXPÉDITION MONDIAL

Normal 0 21 false false false FR X-NONE X-NONE Condition TEST (datasheet) Va=250V Vg1=-8,5V Ia=10,5mA ECC82 Gf8 MINIWATT SMALL RING GETTER RIBBED PLATES ?5E2 Code 7,1mA/7,9mA ECC82 Gf8 MINIWATT SMALL RING GETTER RIBBED PLATES ?5L1 Code 7,5mA/7,4mA ASK FOR OTHER REFERENCES IF NEEDED. THE ENTIRE STOCK IS NOT ONLINE. I COMBINE SHIPPING. EUROPE COUNTRIES, YOU CAN ASK FOR MONDIAL RELAY DELIVERY SERVICE. ITS LESS EXPENSIVE THAN LAPOSTE, ASK BEFORE PAYING IF YOU CHOOSE THIS SERVICE. TUBES ARE GLASS MADE, THEY ARE FRAGILE. IF YOU SELECT A SIMPLE BUBBLE LETTER FOR THE DELIVERY, I WONT BE RESPONSIBLE IF THEY ARE BROKEN... YOU ASSUME ENTIRE CUSTOMS FEES.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F7L5 code 8,8/8,8 (16,5/16,7) 85/85 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6J44 code 11,0/11,3 (20,6/20,8) 102/105 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6B6 code 9,0/8,2 (16,6/15,2) 75/74 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 12,2/13,1 (22,7/23,8) 110/120 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k6A MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES 45° CLOSE D-GETTER ?2 k6A bottom code 10,2/9,1 (19,5/17,8) 100/97 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES ROUND SIDE HOLE SMALL RING GETTER F8H4 8,1/10,0 (16,4/17,8) 76/84 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6J41 code 10,2/9,6 (18,0/15,8) 78/66 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 9,8/9,1 (18,6/17,3) 92/85 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 9,9/9,8 (19,2/18,8) 95/95 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 5539 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES 11,9/9,2 (20,7/17,0) 92/84 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) Gf8 MINIWATT GREY RIBBED PLATES STRAIGHT COPPER ARMS RING GETTER ?6E3 code 9,1/8,5 (16,6/15,2)mA 73/69 Gf8 MINIWATT GREY RIBBED PLATES STRAIGHT COPPER ARMS RING GETTER ?6J2 code 10,0/9,3 (17,0/16,5)mA 78/69 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k63 MINIWATT COPPER ANODES IN LONG GREY RIBBED PLATES D-GETTER LARGE MICA SPIKES F6A4 code 10,9/12,0 (20,1/21,9) 12,7/12,4 (23,0/22,9) 102/111 114/108 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT COPPER ANODES IN SHORT GREY RIBBED PLATES SMALL RING GETTER LARGE MICA SPIKES F6K45 code 13,3/14,9 (23,8/24,9) 114/119 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) k64 MINIWATT SILVER ANODES IN LONG GREY RIBBED PLATES SMALL RING GETTER F8F3 code 8,5/8,0 (15,5/15,2) 72/59 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)