Vintage 12AU7 ECC82 Valve.

I HAVE FOR SALE A RARE LOT OF 18 x ECC82 12AU7MULLARD, PHILIPS MINIWATT ,MAZDA, BRIMAR, Ei IN SUPERB CONDITION AND GOOD WORKING ORDER A GOOD RANGE OF READINGS -ALL GOOD SERVICEABLE TUBES ??AVO VCM163 TESTED READINGS CAN BE SEEN IN THE LISTINGS 100% = Ia 10.5 gm 2.2 ?PLEASE SEE MY OTHER AUCTIONS?

Une paires (2) ECC82 / 12AU7 MAZDA by TELEFUNKEN Une Véritable paires de ecc82 / 12au7 TELEFUNKEN rebadger MAZDA Codes tubes identiques : III-7 LONG SMOOTH PLATE Fabrication : ALLEMAGNE Losanges aux fonds des tubes Tubes testés : METRIX U61 Valeurs fabriquant 100% = 10,5ma/ 10,5ma , 2,2ma/v , 2,2ma/v @250/--8,5 Valeurs METRIX U61 tube 1 = 9 ma/ 10 ma , 2 ma/v , 2,5ma/v @250/--8,5 Valeurs METRIX U61tube 2 = 8 ma/ 9 ma , 2,5ma/v , 3 ma/v @250/--8,5 EXPÉDITION MONDIAL

paires (2) 6189 / 12AU7 WA-H / ECC82 MAZDA 3 MICAS Véritables 6189 / 12AU7 WA-H / ECC82 MAZDA fabrication : FRANCE 3 MICAS Série militaire TUBES NEUFS TESTÉS METRIX U61 Valeurs fabriquant 100% = 10,5ma/ 10,5ma , 2,2ma/v , 2,2ma/v @250/--8,5 Valeurs METRIX U61 tube 1 = 10 ma/ 9 ma , 2,2ma/v , 2,2ma/v @250/--8,5 Valeurs METRIX U61 tube 2 = 10 ma/ 9 ma , 2,2ma/v , 2,2ma/v @250/--8,5 EXPÉDITION MONDIALE

4 tubes Mazda ECC82 12AU7 neufs Made in England NOS New old stock . Inscription sur lemballage : BVA Thorn , Mazda radio valve . Idéal pour préamplificateur à tubes haut de gamme Audio Research , Precision Fidelity , Doge 8 Pour une expédition en dehors de lUnion Européenne merci de me dander pour les frais de port et dassurance .

Mazda GREY PLATTE O GETTER Valves are tested. I have a HICKOK TV-3C/U tube tester .The measurements are of mutual conductance.The measures are REAL and are the average of five measurements.The object is to get the picture. The 100% of the tube is equal to 2150 micromhos.TUBE A 1800/1800 Attention please Read the following carefully before making purchases. I do not accept the return of the object for any reason. I repeat no reason. If your intention is to buy you must accept this condition. At the end of the auction do not make the payment. I will send you photos of how your valves will be packed. If you think the packaging is insufficient You can ask for the cancellation of the transaction that will be accepted by me.

Mazda ecc82/12au7 D getter .New Valves are tested. I have a HICKOK TV-3C/U tube tester . The measurements are of mutual conductance. The measures are REAL and are the average of five measurements. The object is to get the picture. The 100% of the tube is equal to 2150 micromhos. TUBE 2050/1950Attention please Read the following carefully before making purchases. I do not accept the return of the object for any reason. I repeat no reason. If your intention is to buy you must accept this condition. At the end of the auction do not make the payment. I will send you photos of how your valves will be packed. If you think the packaging is insufficient You can ask for the cancellation of the transaction that will be accepted by me.

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA 6204 MAZDA SILVER ANODES IN ROUND HOLE IN PLATES 8,3/8,3 (16,4/16,3)mA 91/90 AUA 6202 MAZDA SILVER ANODES IN ROUND HOLE IN PLATES 8,7/8,3 (17,1/16,4)mA 95/89 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA 825 MAZDA GREY BOX PLATES RING GETTER 9,7/9,8 (16,0/17,5)mA 10,3/8,4 (18,1/15,7)mA 78/80 82/78 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA 6521 MAZDA COPPER ANODES IN SQUARE HOLE IN PLATE 8,6/7,4 (17,1/16,1)mA 90/88 AUA BELVU COPPER ANODES IN SQUARE HOLE IN PLATE 8,8/8,5 (17,6/17,0)mA 94/92 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) ue MAZDA Long flat plates, ring getter telefunken bottom code 10,3/10,4 (20,4/20,5) 110/110 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/UEV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA 6108 MAZDA SILVER ANODES IN ROUND HOLE IN PLATES 9,3/8,8 (18,5/17,1)mA 98/92 AUA 6309 MAZDA SILVER ANODES IN ROUND HOLE IN PLATES 9,6/8,7 (18,7/17,0)mA 97/90 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA MINIWATT Dario COPPER ANODES IN SQUARE HOLE IN PLATE 8,3/8,5 (17,1/18,0)mA 88/88 AUA 7115 MAZDA Belvu COPPER ANODES IN SQUARE HOLE IN PLATE 8,4/8,7 (16,8/17,2)mA 88/88 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va=250V Vg=-8,5V & (-5V) Ia=10,5mA & (20mA) HICKOK TV7D/U EV7-6080 B24 B min=56 (65%) (100%=93)EV2-1030 B24 B min=56 (65%) (100%=93) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) AUA 6326 MAZDA SILVER ANODES SQUARE HOLE IN PLATE 8,8/8,4 (17,2/16,2) 85/80 AUA 6327 MAZDA SILVER ANODES SQUARE HOLE IN PLATE 8,4/9,6 (16,1/18,0) 82/87 EUROPE COUNTRIES --> ASK FOR MONDIAL RELAY SERVICE (LESS EXPENSIVE)

Très rare Une paires (2) ECC82 / 12AU7 MAZDA Une Véritable paires de ecc82 / 12AU7 MAZDA K64 Fabrication : FRANCE Serie : k64 Codes tubes : IX-7 K64 F7D4 et IX7 K64 F7?? Tubes testés : METRIX U61 Valeurs fabriquant 100% = 10,5ma/ 10,5ma , 2,2ma/v , 2,2 ma/v @250/--8,5 Valeurs METRIX U61 tube 1 = 11,5ma/ 11 ma , 3 ma/v , 3 ma/v @250/--8,5 Valeurs METRIX U61tube 2 = 11,5ma/ 7 ma , 2,5ma/v , 2 ma/v @250/--8,5 EXPÉDITION MONDIAL

Une paires (2) ECC82 / 12AU7 MAZDA by TELEFUNKEN Une Véritable paires de ecc82 / 12au7 TELEFUNKEN rebadger MAZDA Fabrication : ALLEMAGNE LONG SMOOTH PLATE Losanges aux fonds des tubes Tubes testés : METRIX U61 Valeurs fabriquant 100% = 10,5ma/ 10,5ma , 2,2ma/v , 2,2ma/v @250/--8,5 Valeurs METRIX U61 tube 1 = 8,5ma/ 8,5ma , 2,2ma/v , 2,1ma/v @250/--8,5 Valeurs METRIX U61tube 2 = 8 ma/ 8 ma , 2,2ma/v , 2,2ma/v @250/--8,5 EXPÉDITION MONDIAL

4 tubes Mazda ECC82 12AU7 neufs Made in England NOS New old stock . Inscription sur lemballage : BVA Thorn , Mazda radio valve . Idéal pour préamplificateur à tubes haut de gamme Audio Research , Precision Fidelity , Doge 8 Pour une expédition en dehors de lUnion Européenne merci de me dander pour les frais de port et dassurance .

*** Perfect Balanced Plates! *** MAZDAECC82 12AU7 ECC 82 Short Ribbed Plate / O Getter! Audio Preamp Tube BOGEN AMP Tested - No microphonics TV-7/u Tested Condition Report: ** Tubes TESTED AND sounded good in my BOGEM AMP! No microphonics! ** ** I WILL COMBINE SHIPPING COST ON MY ITEMS!!! ** Tested to be in guaranteed working conditionI tested these on a High Quality Professonal Hickok TV-7/U Tester:TUBEs TEST RESULTs: ** NOTE: You will be shipping 1 of these tubes below (sold in order of item purchased from you the buyer)... Tube: 82/80 - {Minimum Rating of 56/56 for TV-7 Testers are equal to 65% of average new ratings.} If you have Questions or Comments contact me on eBay Check out the photos! TESTED WITH a (TV-7/U) FOR GAS, SHORTS, AND MUTUAL CONDUCTANCE AND ARE MOSTLY STRONG TUBES! I Combine ShippingBefore You Pay. I accept PayPal and Postal M O.Please see click to enlarge photos for condition and quality.Check out My Other Items For Sale!WILL BE SHIPPED OUT FAST! Before bidding please read my shipping and return policy. I WILL COMBINE SHIPPING COST ON MY ITEMS!!! NOTE: International buyers - THE BUYER IS RESPONSIBLE FOR SHIPPING FEES. INTERNATIONAL BIDS WELCOME. I WONT CHANGE DECLARED VALUE ON CUSTOM FORMS AND INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ALL TAXES, CUSTOM FEES, and additional shipping fees. ANY RETURN WILL BE ACCEPTED BUT BUYER WILL PAY SHIPPING FEES AND I WILL NOT REFUND ANY SHIPPING FEES.*TESTED ON Calibrated HICKOK TV-7 B/U*{Minimum Ratings for TV-7 Testers are equal to 65% of average new ratings.}ALL tubes will be ran through a Daniel Nelson calibrated HICKOK TV-7 B/U for a full mutual conductance test. This is a world class tester that is calibrated by the Hickok doctor. Its test results are dead on and you can buy with confidence. If you want to know what the exact Gm rating of the tube is please message me. My Return Policy: Will not accept returns for reasons such as ordered the wrong item, change mind, not what I thought It was, wrong color ordered, item ordered.

Mazda ecc82/12au7 D getter .New Valves are tested. I have a HICKOK TV-3C/U tube tester . The measurements are of mutual conductance. The measures are REAL and are the average of five measurements. The object is to get the picture. The 100% of the tube is equal to 2150 micromhos. TUBE 2050/1950Attention please Read the following carefully before making purchases. I do not accept the return of the object for any reason. I repeat no reason. If your intention is to buy you must accept this condition. At the end of the auction do not make the payment. I will send you photos of how your valves will be packed. If you think the packaging is insufficient You can ask for the cancellation of the transaction that will be accepted by me.

*** Perfect Balanced Plates! *** MAZDAECC82 12AU7 ECC 82 Short Ribbed Plate / O Getter! Audio Preamp Tube BOGEN AMP Tested - No microphonics TV-7/u Tested Condition Report: ** Tubes TESTED AND sounded good in my BOGEM AMP! No microphonics! ** ** I WILL COMBINE SHIPPING COST ON MY ITEMS!!! ** Tested to be in guaranteed working conditionI tested these on a High Quality Professonal Hickok TV-7/U Tester:TUBEs TEST RESULTs: ** NOTE: You will be shipping 1 of these tubes below (sold in order of item purchased from you the buyer)... Tube: 82/80 - {Minimum Rating of 56/56 for TV-7 Testers are equal to 65% of average new ratings.} If you have Questions or Comments contact me on eBay Check out the photos! TESTED WITH a (TV-7/U) FOR GAS, SHORTS, AND MUTUAL CONDUCTANCE AND ARE MOSTLY STRONG TUBES! I Combine ShippingBefore You Pay. I accept PayPal and Postal M O.Please see click to enlarge photos for condition and quality.Check out My Other Items For Sale!WILL BE SHIPPED OUT FAST! Before bidding please read my shipping and return policy. I WILL COMBINE SHIPPING COST ON MY ITEMS!!! NOTE: International buyers - THE BUYER IS RESPONSIBLE FOR SHIPPING FEES. INTERNATIONAL BIDS WELCOME. I WONT CHANGE DECLARED VALUE ON CUSTOM FORMS AND INTERNATIONAL BUYERS ARE RESPONSIBLE FOR ALL TAXES, CUSTOM FEES, and additional shipping fees. ANY RETURN WILL BE ACCEPTED BUT BUYER WILL PAY SHIPPING FEES AND I WILL NOT REFUND ANY SHIPPING FEES.*TESTED ON Calibrated HICKOK TV-7 B/U*{Minimum Ratings for TV-7 Testers are equal to 65% of average new ratings.}ALL tubes will be ran through a Daniel Nelson calibrated HICKOK TV-7 B/U for a full mutual conductance test. This is a world class tester that is calibrated by the Hickok doctor. Its test results are dead on and you can buy with confidence. If you want to know what the exact Gm rating of the tube is please message me. My Return Policy: Will not accept returns for reasons such as ordered the wrong item, change mind, not what I thought It was, wrong color ordered, item ordered.

Mazda GREY PLATTE O GETTER Valves are tested. I have a HICKOK TV-3C/U tube tester .The measurements are of mutual conductance.The measures are REAL and are the average of five measurements.The object is to get the picture. The 100% of the tube is equal to 2150 micromhos.TUBE A 1800/1800 Attention please Read the following carefully before making purchases. I do not accept the return of the object for any reason. I repeat no reason. If your intention is to buy you must accept this condition. At the end of the auction do not make the payment. I will send you photos of how your valves will be packed. If you think the packaging is insufficient You can ask for the cancellation of the transaction that will be accepted by me.

Tested Tested with calibrated Funke W19s 20/20mA18/17mA good start @10.5/10.5mA working guaranteeCombine Shipping worldwide flat rate shipping 22-36$ fast priority shippingcombine up to 20 Noval or 8 Octal Tubes Payment must be received within 2 days of auctions end, unless other arrangements have been made. Item will be shipped within 3 business days of receipt of payment. Make sure that your Phonenumber is in your Adress you have provided on Ebay. I Need the Number for your Post Service Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. all Items are shipped from Switzerland we send only with Trackingnumber, no low budget shipping Item is guaranteed to be as described. Please free feel to eMail me with your questions before bidding. If in doubt, ask! Remember, if you bid and win, you are under contract to pay for this item. Finally, I reserve the right to reject bids from people with excessive negative feedback, a history of non-payment, or any other reason that suggests that you are not bidding in good faith. that additional VAT of your country can arise _gsrx_vers_1516 (GS 9.3 (1516))

Tested Tested with calibrated Funke W19s 14/14mA24/17mA good start @10.5/10.5mA working guaranteeCombine Shipping worldwide flat rate shipping 22-36$ fast priority shippingcombine up to 20 Noval or 8 Octal Tubes Payment must be received within 2 days of auctions end, unless other arrangements have been made. Item will be shipped within 3 business days of receipt of payment. Make sure that your Phonenumber is in your Adress you have provided on Ebay. I Need the Number for your Post Service Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. all Items are shipped from Switzerland we send only with Trackingnumber, no low budget shipping Item is guaranteed to be as described. Please free feel to eMail me with your questions before bidding. If in doubt, ask! Remember, if you bid and win, you are under contract to pay for this item. Finally, I reserve the right to reject bids from people with excessive negative feedback, a history of non-payment, or any other reason that suggests that you are not bidding in good faith. that additional VAT of your country can arise _gsrx_vers_1516 (GS 9.3 (1516))

AS FOUND, FROM RETIRED RADIO ENGINEERS WORKSHOP CLEARANCEHEATERS CHECKED OK FOR CONTINUITY,OTHERWISE NOT TESTED.Postage and packing UK £5, in EU 14 GBP, 22 GBP Worldwide This includes Tracking I will always combine postage on multiple items where possibleAll buyers are encouraged to pay via Paypal. The description is as accurate as possible and packaging is always sufficient, see my feedback for evidence. However there may be the occasion when problems arise, in which case if the buyer is not happy with the purchase every effort will be made to resolve the dissatisfaction. Typical feed back:- You know a really great seller when things go wrong and he takes care of it.