This projector was/is very high-end. It has the error code flashing that most likely indicates a ballast PCB failure. Usually I would fix this myself but Ive decided to go for a big flat screen TV to place in my theater.The unit comes in original box with remote, manual and all packing. It also comes with a spare bulb which alone is worth $100. 3D projector with 50,000:1 native contrast ratio, 3D viewing, D-ILA devices, 2x motorized zoom lens with motorized focus, new Clear Motion Drive, Picture modes for various video sources, Screen Adjustment Mode, flexible set-up and more. Three 0.7 Full HD D-ILA devicesInput signal capability: 1080pTrue full HD resolution: 1920 x 1080220W Ultra High-pressure Mercury Lamp Projection Size: 60-inch to 200-inchProjection Distance: 3.01m to 6.13m (100-inch)

This projector was/is very high-end. It has the error code flashing that most likely indicates a ballast PCB failure. Usually I would fix this myself but Ive decided to go for a big flat screen TV to place in my theater.The unit comes in original box with remote, manual and all packing. It also comes with a spare bulb which alone is worth $100. 3D projector with 50,000:1 native contrast ratio, 3D viewing, D-ILA devices, 2x motorized zoom lens with motorized focus, new Clear Motion Drive, Picture modes for various video sources, Screen Adjustment Mode, flexible set-up and more. Three 0.7 Full HD D-ILA devicesInput signal capability: 1080pTrue full HD resolution: 1920 x 1080220W Ultra High-pressure Mercury Lamp Projection Size: 60-inch to 200-inchProjection Distance: 3.01m to 6.13m (100-inch)

Experience the ultimate in high-definition projection with the JVC DLA-X35BU 3D Enabled 3-Chip HD D-ILA X35B X35 Projector. This top-of-the-line projector boasts a native resolution of 1920 x 1080 and a display technology of D-ILA, ensuring that you get the clearest and most vivid images possible. With its 3D capabilities, you can immerse yourself in your favorite movies and shows like never before. This projector is perfect for any home theater setup and is sure to impress your guests. Its compact design and easy-to-use remote make it a great addition to any room. Don't miss out on the opportunity to own this amazing projector. This item is used but in great condition. Does not include the leveling feet.

DescriptionAuthenticity: 100% AUTHENTIC! If you have any question about the condition, accessories, or anything about the product,Please feel free to message us. We are glad to answer all your concerns. ShippingDHL, Fedex Fastshipping3-10 business days after shipment(Tracking number + Insurance.)PaymentPlease give me the payment within 3days from the date of bid.About UsWe sell our items on other websites and in our retail stores in Japan at the same time.If the item was sold out before your purchase, your order will be cancelled and a full refund will be issued immediately. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying.We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you.

Experience the ultimate in high-definition projection with the JVC DLA-X35BU 3D Enabled 3-Chip HD D-ILA X35B X35 Projector. This top-of-the-line projector boasts a native resolution of 1920 x 1080 and a display technology of D-ILA, ensuring that you get the clearest and most vivid images possible. With its 3D capabilities, you can immerse yourself in your favorite movies and shows like never before. This projector is perfect for any home theater setup and is sure to impress your guests. Its compact design and easy-to-use remote make it a great addition to any room. Don't miss out on the opportunity to own this amazing projector. This item is used but in great condition. Does not include the leveling feet.

Item TitleJvc Dla-X30 D-Ila Home Theater Projector Payment Supports managed payments Please pay within 5 days after auction is finished. About Us We are located in Japan. Its our pleasure to make you happy by proposing our recommend item. If you have any questions or request about items please feel free to ask us. International Buyers - Please Note: -Import duties taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. -Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. -These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. -We do not mark merchandise values below value or mark items as - gifts - The US and International government regulations prohibit such behavior. Thank you for your understanding.

Ich verkaufe aus privaten, tierfreien Nichtraucherhaushalt folgenden defekten Artikel: Projektor / Beamer JVC DLA-X3-W Regelmäßig (aber nicht immer) nach ca. 1,5 bis 2,0 Stunden nach Inbetriebnahme fängt das Bild an zu flackern.Nach ca. 30 Minuten ist das Flackern wieder weg.Nach Auskuft der JVC - Werkstatt müsste das Mainboard für einen reibungslosten Betrieb ausgetauscht werden,außerdem soll etwas nicht mit dem HDMI 1-Eingang stimmen. Ich habe immer den HDMI 2 -Eingang genutzt und dieser funktioniert einwandfrei. Es ist die dritte Original-Lampe verbaut, die inzwischen 1.081 Stunden gelaufen ist. Es ist noch alles vorhanden:Fernbedienung (die leider nicht mehr so toll aussieht, weil sich die Beschichtung aufgelöst hat, aber voll funktionstüchtig ist)SromkabelBedienungsanleitungOriginal Karton3D IF Transmitter mit Fuss (sowie einen zusätzlichen 3D Transmitter ohne Fuss)2 original JVC 3D-Brillen, die mit Batterien (Knopfzellen) laufen (Batterien sind nicht dabei)2 original JVC 3D-Brillen, die mit Akkus laufen (Ladekabel jeweils dabei) Aufgrund der vorübergehenden Fehlfunktion (s.o.) verkaufe ich den Projektor privat ausdrücklich als defektund übernehme keine Garantie oder nehme den Artikel zurück. Die Versandkosten per DHL sind so hoch, da das Paket sehr schwer ist. Bitte bieten Sie daher nur, wenn Sie damit einverstanden sind.

Ich verkaufe aus privaten, tierfreien Nichtraucherhaushalt folgenden defekten Artikel: Projektor / Beamer JVC DLA-X3-W Regelmäßig (aber nicht immer) nach ca. 1,5 bis 2,0 Stunden nach Inbetriebnahme fängt das Bild an zu flackern.Nach ca. 30 Minuten ist das Flackern wieder weg.Nach Auskuft der JVC - Werkstatt müsste das Mainboard für einen reibungslosten Betrieb ausgetauscht werden,außerdem soll etwas nicht mit dem HDMI 1-Eingang stimmen. Ich habe immer den HDMI 2 -Eingang genutzt und dieser funktioniert einwandfrei. Es ist die dritte Original-Lampe verbaut, die inzwischen 1.081 Stunden gelaufen ist. Es ist noch alles vorhanden:Fernbedienung (die leider nicht mehr so toll aussieht, weil sich die Beschichtung aufgelöst hat, aber voll funktionstüchtig ist)SromkabelBedienungsanleitungOriginal Karton3D IF Transmitter mit Fuss (sowie einen zusätzlichen 3D Transmitter ohne Fuss)2 original JVC 3D-Brillen, die mit Batterien (Knopfzellen) laufen (Batterien sind nicht dabei)2 original JVC 3D-Brillen, die mit Akkus laufen (Ladekabel jeweils dabei) Aufgrund der vorübergehenden Fehlfunktion (s.o.) verkaufe ich den Projektor privat ausdrücklich als defektund übernehme keine Garantie oder nehme den Artikel zurück. Die Versandkosten per DHL sind so hoch, da das Paket sehr schwer ist. Bitte bieten Sie daher nur, wenn Sie damit einverstanden sind.

Excellent condition. We’ve down sized and no longer have a theater. This projector will still out perform most new 4k projectors under $3k. Excellent blacks and contrast levels. Motorized lens shift and keystone correction. Brand new lamp. I replaced it to be able to sell it with 0 hours. This projector is heavy (weighs over 30lbs) and intended to be mounted. Also including a Harmony 700 universal remote. This projector is heavy. I do not have the original box but, I will take it to the local shipping store for it to be packed properly.

JVC D-ILA Procision DLA-X3-BU Home theater 3d projector No other parts included Needs new lamp according to repair shop The DLA-X3 (and its professional-market counterpart, the DLA-RS40) is the entry-level model in the 3D line. With an MSRP of $4,499.95, this D-ILA projector has a 1080p resolution and a rated 50,000:1 native contrast ratio, and it features the HQV Reon-VX processing chip, 120Hz Clear Motion Drive, two anamorphic lens modes, a 220-watt UHP lamp, and motorized zoom/focus controls. JVC has opted to go the active 3D route with its projectors: The DLA-X3 uses frame-sequential technology, in which the projector alternately flashes a full-resolution left-eye and right-eye image. Active 3D requires special glasses that contain shutters that open and close in sync with the signal to direct the appropriate image to each eye. In this case, you also need a 3D signal emitter that connects to the projector and communicates with the glasses. JVC includes neither the glasses nor the emitter in the DLA-X3's package. The PK-EM1 signal emitter costs $79, while the PK-AG1 glasses cost $179 each.

Excellent condition. We’ve down sized and no longer have a theater. This projector will still out perform most new 4k projectors under $3k. Excellent blacks and contrast levels. Motorized lens shift and keystone correction. Brand new lamp. I replaced it to be able to sell it with 0 hours. This projector is heavy (weighs over 30lbs) and intended to be mounted. Also including a Harmony 700 universal remote. This projector is heavy. I do not have the original box but, I will take it to the local shipping store for it to be packed properly.

Ich verkaufe aus privaten, tierfreien Nichtraucherhaushalt folgenden defekten Artikel: Projektor / Beamer JVC DLA-X3-W Regelmäßig (aber nicht immer) nach ca. 1,5 bis 2,0 Stunden nach Inbetriebnahme fängt das Bild an zu flackern.Nach ca. 30 Minuten ist das Flackern wieder weg.Nach Auskuft der JVC - Werkstatt müsste das Mainboard für einen reibungslosten Betrieb ausgetauscht werden,außerdem soll etwas nicht mit dem HDMI 1-Eingang stimmen. Ich habe immer den HDMI 2 -Eingang genutzt und dieser funktioniert einwandfrei. Es ist die dritte Original-Lampe verbaut, die inzwischen 1.081 Stunden gelaufen ist. Es ist noch alles vorhanden:Fernbedienung (die leider nicht mehr so toll aussieht, weil sich die Beschichtung aufgelöst hat, aber voll funktionstüchtig ist)SromkabelBedienungsanleitungOriginal Karton3D IF Transmitter mit Fuss (sowie einen zusätzlichen 3D Transmitter ohne Fuss)2 original JVC 3D-Brillen, die mit Batterien (Knopfzellen) laufen (Batterien sind nicht dabei)2 original JVC 3D-Brillen, die mit Akkus laufen (Ladekabel jeweils dabei) Aufgrund der vorübergehenden Fehlfunktion (s.o.) verkaufe ich den Projektor privat ausdrücklich als defektund übernehme keine Garantie oder nehme den Artikel zurück. Die Versandkosten per DHL sind so hoch, da das Paket sehr schwer ist. Bitte bieten Sie daher nur, wenn Sie damit einverstanden sind.

JVC DLA-X30B 1080P projector. About 2000-2500 total hours, 1500 hours on the installed lamp which is working but dimming and should be changed soon. I bought it new in 2012, used ~500 hours and it went into storage until 2019. Used from 2019 until early 2024 and recently taken down and ready for a new owner. Original box and remote. Never had the 3D glasses or emitter so those are not included. It looks great especially in a dark room and film based content. I used this with a 110 inch screen with a 12 foot throw distance. Never had an issue with it, but I do suggest the new owner purchase the correct OE lamp, and after market discounted lamp I tried a few year back lasted only 400 hours.

This was part of an theater in my parents home before being sold. The unit works perfectly and includes two spare bulbs as well as a ceiling mount (still attached to the projector for now). It also has the remote and power cable so you are ready to roll. The DLA-X3 is the entry-level model in the 3D line. With an original MSRP of $4,499.95 back in the day, but as this unit is obviously older Ive marked the price down respectively. Happy bidding. Description. This D-ILA projector has a 1080p resolution and a rated 50,000:1 native contrast ratio, and it features the HQV Reon-VX processing chip, 120Hz Clear Motion Drive, two anamorphic lens modes (available separately), a 220-watt UHP lamp, and motorized zoom/focus controls. JVC has opted to go the active 3D route with its projectors: The DLA-X3 uses frame-sequential technology, in which the projector alternately flashes a full-resolution left-eye and right-eye image. Active 3D does require special glasses. Setup & Features Its a beefy unit that measures 17.9 x 7 x 18.6 inches and weighs about 32 pounds, but the high-gloss-black finish lends a bit of elegance to distinguish it from your basic boxy design. The lens is mounted in the center of the unit, and two curved ventilation ports run along each side. Buttons for power, input, menu, and navigation are located on the back--next to a connection panel that includes dual HDMI 1.4a inputs, component video, RS-232, a 12-volt trigger, a remote control port, and a port to connect the optional 3D signal emitter. The DLA-X3 has a motorized lens cover that automatically opens when you power up the projector and closes when you shut it down. The included remote control is fully backlit and has a clean, logical layout. Physical setup is incredibly easy thanks to the DLA-X3s motorized 2x zoom, motorized focus, and generous lens-shift capabilities (+/-80 percent vertical, +/-34 percent horizontal). The projector also has adjustable feet, onscreen patterns to aid with position/focus, and horizontal/vertical keystone correction, and you can configure it for front or rear projection and a ceiling or table mount. I placed the unit on an equipment rack about 4 feet high, directly behind my seating area, 14 feet from my 75-inch-diagonal Elite Screens theater screen. The DLA-X3 provides the essentials to fine-tune the image--beginning with nine picture modes (three of which are user modes). The DLA-X3 offers two ways to adjust the projectors light output: You can select between a Normal and High lamp mode and precisely adjust the lens aperture (with 0 being wide open and thus the brightest, -15 being the darkest). The one area where the DLA-X3 is a bit lacking is in color management. This projector does not include the seven-axis system found in the step-up models, which lets you independently adjust all six color points plus orange; rather, you can only choose between Normal, Wide1, and Wide2 color spaces. I stuck with the Normal mode for 2D content, as I found it to produce the most natural-looking color. JVCs 120Hz Clear Motion Drive includes five different options, and the user manual kindly explains what each one does. Modes 1 and 2 insert black frames between existing frames to reduce motion blur, while Modes 3 and 4 use varying degrees of frame interpolation to reduce motion blur and film judder. Theres also an Inverse Telecine mode thats designed to reduce judder by first deconstructing the 60Hz film image back to the original 24 frames and then converting it to 120Hz. Leave the CMD control off (which it is by default), and the projector simply duplicates frames to get to 120Hz. The DLA-X3 has three just aspect ratios: 16:9, 4:3, and a Zoom mode for non-HD sources. A separate Mask control lets you add 2.5 or 5 percent overscan, if desired. The projector also offers two anamorphic modes, for use with a separate anamorphic lens that allows you to view 2.35:1 films with no black bars on the top and bottom. Mode A stretches the image vertically, and mode B squeezes it horizontally. JVCs D-ILA projectors are known for their contrast and black level. Most DLP and LCD projectors achieve higher contrast ratios by using an auto iris that constantly adjusts to suit the content being displayed on the screen. The iris opens wide during bright scenes to improve light output and squeezes during dark scenes to improve black level, which unfortunately also limits the brightness of any brighter objects in that same scene. JVCs D-ILA technology (a form of LCOS, or liquid crystal on silicon) doesnt use an auto iris, so theres no limiting or subtle shifting of image brightness and no sound of an auto iris doing its job.

This was part of an theater in my parents home before being sold. The unit works perfectly and includes two spare bulbs as well as a ceiling mount (still attached to the projector for now). It also has the remote and power cable so you are ready to roll. The DLA-X3 is the entry-level model in the 3D line. With an original MSRP of $4,499.95 back in the day, but as this unit is obviously older Ive marked the price down respectively. Happy bidding. Description. This D-ILA projector has a 1080p resolution and a rated 50,000:1 native contrast ratio, and it features the HQV Reon-VX processing chip, 120Hz Clear Motion Drive, two anamorphic lens modes (available separately), a 220-watt UHP lamp, and motorized zoom/focus controls. JVC has opted to go the active 3D route with its projectors: The DLA-X3 uses frame-sequential technology, in which the projector alternately flashes a full-resolution left-eye and right-eye image. Active 3D does require special glasses. Setup & Features Its a beefy unit that measures 17.9 x 7 x 18.6 inches and weighs about 32 pounds, but the high-gloss-black finish lends a bit of elegance to distinguish it from your basic boxy design. The lens is mounted in the center of the unit, and two curved ventilation ports run along each side. Buttons for power, input, menu, and navigation are located on the back--next to a connection panel that includes dual HDMI 1.4a inputs, component video, RS-232, a 12-volt trigger, a remote control port, and a port to connect the optional 3D signal emitter. The DLA-X3 has a motorized lens cover that automatically opens when you power up the projector and closes when you shut it down. The included remote control is fully backlit and has a clean, logical layout. Physical setup is incredibly easy thanks to the DLA-X3s motorized 2x zoom, motorized focus, and generous lens-shift capabilities (+/-80 percent vertical, +/-34 percent horizontal). The projector also has adjustable feet, onscreen patterns to aid with position/focus, and horizontal/vertical keystone correction, and you can configure it for front or rear projection and a ceiling or table mount. I placed the unit on an equipment rack about 4 feet high, directly behind my seating area, 14 feet from my 75-inch-diagonal Elite Screens theater screen. The DLA-X3 provides the essentials to fine-tune the image--beginning with nine picture modes (three of which are user modes). The DLA-X3 offers two ways to adjust the projectors light output: You can select between a Normal and High lamp mode and precisely adjust the lens aperture (with 0 being wide open and thus the brightest, -15 being the darkest). The one area where the DLA-X3 is a bit lacking is in color management. This projector does not include the seven-axis system found in the step-up models, which lets you independently adjust all six color points plus orange; rather, you can only choose between Normal, Wide1, and Wide2 color spaces. I stuck with the Normal mode for 2D content, as I found it to produce the most natural-looking color. JVCs 120Hz Clear Motion Drive includes five different options, and the user manual kindly explains what each one does. Modes 1 and 2 insert black frames between existing frames to reduce motion blur, while Modes 3 and 4 use varying degrees of frame interpolation to reduce motion blur and film judder. Theres also an Inverse Telecine mode thats designed to reduce judder by first deconstructing the 60Hz film image back to the original 24 frames and then converting it to 120Hz. Leave the CMD control off (which it is by default), and the projector simply duplicates frames to get to 120Hz. The DLA-X3 has three just aspect ratios: 16:9, 4:3, and a Zoom mode for non-HD sources. A separate Mask control lets you add 2.5 or 5 percent overscan, if desired. The projector also offers two anamorphic modes, for use with a separate anamorphic lens that allows you to view 2.35:1 films with no black bars on the top and bottom. Mode A stretches the image vertically, and mode B squeezes it horizontally. JVCs D-ILA projectors are known for their contrast and black level. Most DLP and LCD projectors achieve higher contrast ratios by using an auto iris that constantly adjusts to suit the content being displayed on the screen. The iris opens wide during bright scenes to improve light output and squeezes during dark scenes to improve black level, which unfortunately also limits the brightness of any brighter objects in that same scene. JVCs D-ILA technology (a form of LCOS, or liquid crystal on silicon) doesnt use an auto iris, so theres no limiting or subtle shifting of image brightness and no sound of an auto iris doing its job.

Ich biete hier einen JVC Beamer 3d DLA-X3-BE mit 2 Brillen an. Die Lampenlaufzeit beträgt erst 168 Stunden.Die Fernbedienung funktioniert nicht (warum weiß ich nicht) aber die Bedienknöpfe auf der Rückseite des Beamers funktionieren einwandfrei.

Ich biete hier einen JVC Beamer 3d DLA-X3-BE mit 2 Brillen an. Die Lampenlaufzeit beträgt erst 168 Stunden.Die Fernbedienung funktioniert nicht (warum weiß ich nicht) aber die Bedienknöpfe auf der Rückseite des Beamers funktionieren einwandfrei.

Experience the ultimate cinematic experience with the JVC DLA-X30BU 3D Capable Home Theater Projector. This professional-grade unit features DLP display technology and a 2x motorized lens magnification for an immersive viewing experience. The unit boasts a maximum resolution of 1920x1080p and a high image brightness of 1300 ANSI Lumens. The projector also features multiple aspect ratio options and color correction, allowing you to customize the display to your liking.

Ich biete hier einen JVC Beamer 3d DLA-X3-BE mit 2 Brillen an. Die Lampenlaufzeit beträgt erst 168 Stunden.Die Fernbedienung funktioniert nicht (warum weiß ich nicht) aber die Bedienknöpfe auf der Rückseite des Beamers funktionieren einwandfrei.

Selling my JVC DLA-X30 1080p projector after a recent upgrade. I am the original owner. The projector was professionally installed, setup, and un-installed. Bulb was recently changed and has 144hrs on it. Projector was installed in a pet free, smoke free, dedicated home theater. Includes all original accessories, 3D syncro emitter, 3 pairs of 3D glasses, 15M HDMI cable, and original box w/ packing materials. No issues.

Experience the ultimate cinematic experience with the JVC DLA-X30BU 3D Capable Home Theater Projector. This professional-grade unit features DLP display technology and a 2x motorized lens magnification for an immersive viewing experience. The unit boasts a maximum resolution of 1920x1080p and a high image brightness of 1300 ANSI Lumens. The projector also features multiple aspect ratio options and color correction, allowing you to customize the display to your liking. Connectivity options include component, 1.4a, and HDMI standard, making it easy to connect your favorite devices. This black JVC model is designed for ceiling mount use and features short throw projection and projection tilt. With its numerous features and high-quality performance, this home theater projector is a must-have for any movie enthusiast.

JVC DLA-X35BU 3D Enabled 3-Chip Full HD D-ILA X35B X35 Projector i748.

Ich biete hier einen JVC Beamer 3d DLA-X3-BE mit 2 Brillen an. Die Lampenlaufzeit beträgt erst 168 Stunden.Die Fernbedienung funktioniert nicht (warum weiß ich nicht) aber die Bedienknöpfe auf der Rückseite des Beamers funktionieren einwandfrei.