This is tonearm that was manufactured for using in NHK broadcast. Very beautiful, dynamic and sweet sound. Tonearm cable and original weight are included. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Technica vv..v Tonearm specification: A tone arm that employs a dynamic damping mechanism that corresponds to the long type of the DA-309. The DA-308 is a long-type tonearm with a total length of 38 cm (effective length of 28.2 cm), which reduces tracking error by 20%. The dynamic damping organization is adopted in order to suppress the influence of an arm squeak and howling. This system has a structure in which a damper rubber having appropriate viscosity is inserted between the body of the tonearm and the pipe. This has effectively improved the vibratory problem which was difficult to solve conventionally. With the dynamic damping method, vibration noise transmitted from the players cabinet is less likely to be received, and the reproduced sound of the cartridge used is less colored, bringing out the character of the cartridge itself. In addition, since it has an effective filtering action against the sound pressure from the speaker, the natural vibration of each part that makes up the tonearm is reduced. The non-contact inside force canceller is carried. This mechanism cancels the inside force by changing the attractive force according to the distance between the rotating drum and the magnet. Since this method has a non-contact structure, it does not impair the performance of the tonearm, and it can follow changes in the inside force due to the position of the stylus tip of the record-shaped cartridge, so it is possible to obtain an appropriate amount of outside force. In addition, the cancellation function can be turned off with a single touch, so there is no problem when adjusting the zero balance. The vernier dial formula of a new system is adopted as stylus pressure adjustment. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. Equipped with a sub-counterweight to support the installation of heavyweight cartridges. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. PCL-7 is adopted as a head shell. This head shell is reducing split resonance by combining a high-rigidity magnesium alloy and a viscoelastic material. The low capacity output cord is adopted as the output cord. Format Dynamic damping, static balance S-shaped Total length 380mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0 to 2.5g per rotation, 0.1g steps Compatible cartridge self-weight range (Including shell) No sub-weight: about 14-24g Use of sub-weight: about 24-34g Attached head shell PCL-7 Headshell weight 8.5g Height adjustment range 42-70mm (from arm board to pipe center) Mountable board thickness 5 to 30 mm, washer ?33 mm /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

seller info:Hofkamp & van DroffelaarHoornsedijk 99752 XJ Haren GnNetherlands Aus Nachlass erhalten: Denon DP-1000 & Grace G-940 (made in Japan 1974)Serienummer: 118381Der Denon DP-1000 ist ein hochwertiger Plattenspieler mit Direktantrieb für den Einstieg in den audiophilen Markt.Der DP-1000 wurde auf Basis des Denon DP-3000 entwickelt, einem hoch angesehenen Plattenspieler mit einem AC-Direktantriebs-Servomotor und extrem hoher Rotations- und Pitch-Genauigkeit. Denon-Plattenspieler genießen unter Japan-affinen Audiophilen einen phänomenalen Ruf für ihre Klangqualität und Konstruktion. Dieser DP-1000 ist in einem Denon DP-1700-Sockel montiert. Dieses Gerät ist in sehr gutem Zustand und weist durchgehend nur geringe Gebrauchsspuren auf. Dieser Plattenspieler wurde von unserem professionellen Techniker gründlich überprüft und getestet. Sowohl die 33er als auch die 45er Einstellung funktionieren perfekt und die Plattendrehung funktioniert wie am Schnürchen. Der Grace Tonarm ist für uns eine Unbekannte, er kommt etwas wackelig daher aber vielleicht ist das gerade gut so. Wir kennen uns damit nicht aus und stellen das ganse vorsichthalber als DEFEKT ein. Ohne Headshell und Tonabnehmer. Für Transport wird der Plattenteller, sowie das Contragewicht abgenommen und unten im Paket gelegt, der Tonarm wird gesichert.Verpackt im heavy-duty XL Karton mit Styropur, maßgeschneiderte Isolation. Technische Spezifikationen: Seriennummer: 118381 Herstellungsland/-region: JAPAN Stromversorgung: 220 - 240 Volt, 11 Watt, 50 Herz Maße: 49 x 40 x 15 cm. (B x T x H) Gewicht: 12 kg. International shipping: please ask

This is the first tonearm of Denon Columbia, manufactured for NHK broadcast station in 50s year. It is long version 12 inches tonearm. Armbase is cooper, not aluminium. It is not Denon Corp, it is Denon Columbia which is early of DENON Corp. This is very early version of DA-303. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. You can use it with Denon DL-103 or any other cartridge. /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Denon DA-305 Tonearm cable In Very good Condition for turntable..

Denon DA-305 Tonearm part for turntable..

Denon DA-305 Tonearm collar base & screws In Very good Condition for turntable..

Denon DA-305Tonearm armrest In Very good Condition for turntable..

Denon DA-305 Tonearm Armlift and Cueing device and bracket In Very good Condition for turntable..

Denon DA-305 Tonearm collar base & screws In Very good Condition for turntable..

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

DENON DL-304 MC Cartridge for turntable tonearm. Sound output confirmed on both channels. Sounds great.

DENON DL-207 MC Cartridge for turntable tonearm. Sound output confirmed on both channels. The cartridge has been retipped.

DENON DL-107 MM Cartridge for turntable tonearm. Sound output confirmed on both channels. Sounds great.

DENON DL-311 LC MC Cartridge for turntable tonearm. Sound output confirmed on both channels. Sounds great.

DENON DL-303 MC Cartridge for turntable Tonearm. Sound output confirmed in both channels Sounds great.

DENON DL-301 II MC Cartridge for turntable tonearm. Sound output confirmed on both channels. Sounds great. Look at the pictures the cantilever is slightly tilted to one side.

DENON DL-302 MC Cartridge for turntable Tonearm. Sound output confirmed in both channels Sounds great.

DENON DL-301 MC Cartridge for turntable tonearm. Sound output confirmed on both channels. Sounds great. Look at the pictures the cantilever is slightly tilted to one side.

This is the first tonearm of Denon Columbia, manufactured for NHK broadcast station in 50s year. It is long version 12 inches tonearm. Armbase is cooper, not aluminium. It is not Denon Corp, it is Denon Columbia which is early of DENON Corp. This is very early version of DA-303. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. You can use it with Denon DL-103 or any other cartridge. /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

AUDIO TECHNICA ATP-16T PROFESSIONAL TONEARM for TURBTABLE SPU DENON 103.. LAST ONE.

DENON DP-1000If you are looking for a well built, reliable & great sounding vintage deck, then this is for you!Description:2-speed (33/45rpm), direct drive turntable, pitch adjustable according to the platter strobe system, queing lowers & raises the arm onto the record, fully adjustable tracking weight & anti-skate for exact calibration adjustment. Removable Perspex lid & headshell for cartridge/stylus maintenance. RCA connections to the phono-input in your amp with ground wire to eliminate background hum. Specifications:High performance record players from the Denon hi-fi component series, each consisting of a servo controlled direct drive turntable and a universal tonearm mounted on a substantial wooden cabinet.Denon has devised a special elastic material of just the right viscosity, which is placed between the cabinet and the base of the tonearm, to isolate the tonearm from vibrations through the cabinet. In this and other ways, such as using high quality insulating materials, and inserting reinforcing materials in the cabinet, great care has been taken to prevent howling.SpecificationsDriving system: servo controlled direct driveSpeeds: 33.33 and 45rpmSpeed adjustment range: more than +-3%Wow and flutter: less than 0.018% WRMSS/N ratio: more than 75dBPlatter: 1.2kg aluminium diecast 300mm in diameterMotor: AC torque motorSpeed control system: frequency detection servo systemTonearm: static balance typeEffective length: 244mmOverhang: 14mmStylus pressure range: 0 to 2.5gCartridge weight range: 5 to 11gDimensions: 485 x 405 x 170mmWeight: 10.8kgAll internal and external parts have been cleaned, polished and calibrated - fully working strobe and speed adjustment is spot on - no issues.The deck comes with an original Denon DA-50 10 tonearm. Its in excellent condition and it fully calibrated and set up correctly. Excellent bearings, working anti-skate & lift/lower. This is a high quality tonearm.Original 5 pin DIN Phono cable is included.The Tonearm comes fitted with a low resonant headshell fitted with a New Ortofon 2M Red cartridge & stylus. Widely regarded as one of the best budget MM cartridges, set up correctly using Baerwald geometry. Original Denon branded lid has been cleaned and polished prior to listing. Its in excellent condition considering its age with only a few very light age related marks (see pics).Original heavy duty Denon Platter mat included.Original isolation feet in excellent condition.Comes with a brand new step down transformer for U.K. use (pictured).Built in 1974-75, the DP-1000 was well designed and famed for its outstanding reliability, and is much sought after. A high quality turntable that was built like a tank, using quality components and weighing in at an impressive 24lbs! Silent in operation, it has a quality tonearm & being manual it is very simple to operate (plug in and play). Tested prior to listing, this sounded wonderful through my Yaqin Tube amp & Kef R300 speakers - a rock steady, smooth sounding deck.U.K. Postage: £15.00 - Tracked & insured.Will ship to Europe - through Ebay Global Shipping.The turntable will be properly packed, with the platter & weight removed, headshell & Tonearm secured & lid protected.(Bid with confidence - check out my feedback - thank you)

DENON DP-1000If you are looking for a well built, reliable & great sounding vintage deck, then this is for you!Description:2-speed (33/45rpm), direct drive turntable, pitch adjustable according to the platter strobe system, queing lowers & raises the arm onto the record, fully adjustable tracking weight & anti-skate for exact calibration adjustment. Removable Perspex lid & headshell for cartridge/stylus maintenance. RCA connections to the phono-input in your amp with ground wire to eliminate background hum. Specifications:High performance record players from the Denon hi-fi component series, each consisting of a servo controlled direct drive turntable and a universal tonearm mounted on a wooden cabinet.Denon has devised a special elastic material of just the right viscosity, which is placed between the cabinet and the base of the tonearm, to isolate the tonearm from vibrations through the cabinet.In this and other ways, such as using high quality insulating materials, and inserting reinforcing materials in the cabinet, great care has been taken to prevent howling.SpecificationsDriving system: servo controlled direct driveSpeeds: 33.33 and 45rpmSpeed adjustment range: more than +-3%Wow and flutter: less than 0.018% WRMSS/N ratio: more than 75dBPlatter: 1.2kg aluminium diecast 300mm in diameterMotor: AC torque motorSpeed control system: frequency detection servo systemTonearm: static balance typeEffective length: 244mmOverhang: 14mmStylus pressure range: 0 to 2.5gCartridge weight range: 5 to 11gDimensions: 485 x 405 x 170mmWeight: 10.8kgAll internal and external parts have been cleaned, polished and calibrated - fully working strobe and speed adjustment is spot on - no issues.The deck comes with an original Denon DA-50 10 tonearm. Its in excellent condition and it fully calibrated and set up correctly. Good bearings, working anti-skate & lift/lower. This is a high quality tonearm.Original 5 pin DIN Phono cable is included, this can easily be upgraded if required.The Tonearm comes fitted with a low resonant headshell fitted with an AT95E cartridge and stylus. Widely regarded as the best budget MM cartridge, set up correctly using Baerwald geometry. Original Denon branded lid has been cleaned and polished prior to listing. Its in excellent condition considering its age with only a few very light age related marks (see pics).Original heavy duty Denon Platter mat included.Original isolation feet in excellent condition.Comes with a brand new step down transformer for U.K. use (pictured).Built in 1974-75, the DP-1000 was well designed and famed for its outstanding reliability, and is much sought after. A high quality turntable that was built like a tank, using quality components and weighing in at an impressive 24lbs! Silent in operation, it has a quality tonearm & being manual it is very simple to operate (plug in and play). Tested prior to listing, this sounded great through my vintage Yaqin Tube amp & Kef R300 speakers - a rock steady, smooth sounding deck.U.K. Postage: £20.00 - Tracked & insured.Will ship to Europe - through Ebay Global Shipping.The turntable will be properly packed, with the platter & weight removed, headshell & Tonearm secured & lid protected.(Bid with confidence - check out my feedback - thank you)

This is one of the first tonearm of Denon Columbia, manufactured for NHK broadcast station. It is long version 12 inches tonearm It comes with original headshell. This was made by Nippon Columbia Denon, using in NHK broadcast station. Very early version of DA-304. It is medium high mass tonearm, perfect matching with medium compliance and high compliance mass cartridge as DL-103, Audio Tehcnica vv..v This was manufactured for using with DL-103 cartridge, so I highly recommend this for DL-103 fan. This is professional version with long armward. Effective length 282mm, overhange 12.5mm. IT comes with original headshell and very beautiful condition. Specification: A long type tone arm developed and designed for broadcasting stations. A high-class miniature ball bearing is used for the horizontal rotation bearing of the rotation bearing part, and high sensitivity and high reliability have been obtained for a long period of time. In addition, an angular miniature bearing and a quenched and polished pivot are used for the upper and lower moving parts, achieving high sensitivity and stability. In addition, the bearing is protected by a special elastic body, reducing the influence of external vibration. An anti-vibration device combining viscoelastic materials is provided in the arm stand part, and vibration of the board due to external vibration is cut off. The gold-plated terminal is adopted as the connection part with a cartridge, and the reliability is improved. The double indicator micrometer type is adopted as a stylus pressure adjustment mechanism. The thing only for DA-304 is adopted as a head shell. This headshell prevents torsional resonance and reduces the mass. Moreover, removal is possible and the free exchange of a cartridge can be performed. The low capacity output cord is adopted as the output cord. Model Long type tone arm Form Static balance J-shaped Total length 381mm Effective length 282mm Offset angle 18° Overhang 12.5mm Tracking error max. 2.0° Stylus pressure adjustment range 0-3g, 0.2g steps Applicable cartridge weight range: about 11-20g (including shell) Attached head shell Dedicated head shell Headshell weight 5g Height adjustment range 45 to 75 mm (from arm board to center of pipe) Mountable board thickness 10 to 25 mm (3-point nut fastening) Output cord Low-capacity cord direct output, about 0.5m Please check business term before bidding on my item /////////////////////////////// NOTE: 1. Dont share personal information or ask me contact outside eBay as well as offer me purchase outside eBay. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////