Restored Denon DP-47F Turntable Noble Wood Veneer High Gloss The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! Restored fully automatic Denon DP-47F in fine wood veneerwith Ortofon Vinyl Master Alpha MM system Please note that wood is a natural product and each veneer differs in its structure.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was covered with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. Total weight 670g, diameter 43mm, height 20mm.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mm.New hood incl. Cartridge MM system including installation: Cartridge MC System including installation: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replaceme Marke Denon - Restauriert von Art-and-Sound Modell DP-47F Herstellernummer nicht zutreffend Antriebstyp Direktantrieb EAN Nicht zutreffend

Revised Turntable Denon DP-47F Original Rosewood Look + Cover + System The description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/60Hz inside (for example USA, worldwide)!DENON DP-47F in original rosewood lookincluding new hood, Ortofon OM5E pickup and a complete overhaulReplacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high-quality types from PanasonicCartridge Ortofon OM5E:The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Quartz direct drive / servo-controlled direct driveSynchronization fluctuations: Less than 0.010% in the servo systemTurntable: aluminum injection molding, 310mm diameterLinear drive motorSpeed ??control: Speed ??servo control via frequency detection and phase servo controlRepeat function of individual tracks possibleAutomatic plate size detection by sensorAnti-skating systemAutomatic speed detectionWeight: 8.5kgDimensions: W 434 H 179 D 410 mmHousing:The original case was refurbished and polished. The surface of the case is visually in excellent condition. All required cables are permanently installed on the turntable. Original device feet with rubber cushioning.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML Dual MM (Microlinear): 339Audio-Technica VM750SH Dual MM (Shibata): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699 Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Audio-Technica AT-OC9XML Dual MC (Microlinear): 599Audio-Technica AT-OC9XSH Dual MC (Shibata): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799Cartridge MC System including installation: This turntable is available in 220V/50Hz or 110V/60Hz inside (for example USA, worldwide)! Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high-quality types from Panasonic The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. Speed ??control: Speed ??servo control via frequency detection and phase servo control The original case was refurbished and polished. The surface of the case is visually in excellent condition. All required cables are permanently installed on the turntable. Original device feet with rubber cushioning. following Parts are as Accessoriesör receiveältlich and not ingredient this au Herstellernummer nicht zutreffend Marke Denon Modell Denon DP-47F Besonderheiten Direktantrieb EAN Nicht zutreffend

Record Player Turntable Denon DP-47F Black Glossy Fully Automatic incl. Cover The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! Restored fully automatic Denon DP-47F with hood, hinges & pickup systemOriginal housing in black high-gloss finishMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was refurbished and given several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Original device feet with rubber cushioning. All required cables are firmly connected to the turntable.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Device feet XXL: 99 Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmCartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 949Audio-Technica VM740ML Dual MM (Microlinear Diamond Cut): 339Audio-Technica VM750SH Dual MM (Shibata Diamond Cut): 439Audio-Technica VM760SLC Dual MM (Special Line Contact): 699 Audio-Technica AT-OC9XML Dual MC (Microlinear Diamond Cut): 599Audio-Technica AT-OC9XSH Dual MC (Shibata diamond cut): 699Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799 Cartridge MC System including installation: With the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit bo Herstellernummer nicht zutreffend Marke Denon Modell Denon DP-47F Besonderheiten Direktantrieb EAN Nicht zutreffend

Restored Denon DP-47F Turntable Fully Automatic Bicolor Black and Blue The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on Ebay. We would also be happy to restore your Denon to this look.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more and better interesting offers from us. Take a look at... Art and Sound GermanyREVISED by ART-AND-SOUND Restored fully automatic Denon DP-47F bi-color black and metallic blueMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Functions: start, stop, Speed: 33 1/3 & 45, Limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:The original case was refurbished and given several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections. Four height-adjustable stainless steel feet are mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 320g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2MR Red (elliptical): 99 Ortofon 2MR Blue (elliptical, naked): 220 Ortofon 2MR Bronze (Fineline): 390Ortofon 2MR Black (Shibata): 599Ortofon 2MR Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Cartridge MC System including installation: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 320g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. By using it, you increase the sound performance of your system. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor Herstellernummer nicht zutreffend Marke Denon - Restauriert von Art-and-Sound Modell DP-47F Antriebstyp Direktantrieb EAN Nicht zutreffend

Turntable Denon DP-47F White Fully Automatic Incl. Cover And System The description of this item has been automatically translated. If you have any questions, please feel free to contact us. The phonograph works with 220V/50HzFor shipping to the USA the turntable is converted to 110V/60HzDENON DP-47F incl. new hood and systemThe original housing was elaborately refinished with high-gloss varnishThe connection cables are firmly connected to the turntableMicroprocessor controlled direct drive fully automatic turntableFully automatic record player of the reference class, very elegant with a white glossy finish and silver accents.Electrical components are checked, moving parts oiled and wearing parts replaced.The work is rounded off with a final endurance test.Pickup: New Ortofon OM5EThe Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback.Technical data:Quartz direct drive / servo-controlled direct driveSynchronization fluctuations: Less than 0.010% in the servo systemTurntable: aluminum injection molding, 310mm diameterLinear drive motorSpeed ??control: Speed ??servo control via frequency detection and phase servo controlRepeat function of individual tracks possibleAutomatic plate size detection by sensorAnti-skating systemAutomatic speed detectionWeight: 8.5kgDimensions: W 434 H 179 D 410 mmSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principlefollowing Parts are as Accessoriesör receiveältlich and not ingredient this auction:Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Cartridge MM systems including installation:Ortofon 2M Red (elliptical): 90Ortofon 2M Blue (elliptical, naked): 190Ortofon 2M Bronze (fine line): 390Ortofon 2M Black (Shibata): 599Ortofon Vinyl Master Red (elliptical): 220Ortofon Vinyl Master Silver (Fritz Gyger): 390AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica AT33EV(elliptical): 490Audio-Technica ATPTG/II (microlinear): 590Audio-Technica AT33SA (Shibata): 790Audio Technica AT-OC9XML (microlinear): 590Audio Technica AT-OC9XSH (Shibata): 690Audio Technica AT-OC9XSL (special line contact): 790Cartridge MC System including installation: Fully automatic record player of the reference class, very elegant with a white glossy finish and silver accents. The Ortofon OM5E is a fully-fledged cartridge. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that enables balanced and distortion-free playback. Speed ??control: Speed ??servo control via frequency detection and phase servo control Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampening Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VD Herstellernummer nicht zutreffend Marke Denon Farbe Weiß Modell Denon DP-47F Besonderheiten Direktantrieb EAN Nicht zutreffend

Restored Denon DP-47F Turntable Fully Automatic White High Gloss Paint The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! RESTORED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss white lacquerwith Ortofon Vinyl Master AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:Refurbished original case. It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.On the back there is the connection panel for all required cable connections.Four height-adjustable stainless steel feet are mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replaceme Marke Denon - Restauriert von Art-and-Sound Modell DP-47F Herstellernummer nicht zutreffend Antriebstyp Direktantrieb Farbe Weiß EAN Nicht zutreffend

Restored Denon DP-47F Turntable Fully Automatic Orange High Gloss Paint The description of this item has been automatically translated. If you have any questions, please feel free to contact us. Individual production! Please note the processing time stated on eBay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! RESTORED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss orange metallic paintwith Ortofon Vinyl Master AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Basic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmHousing:Refurbished original case. It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.On the back there is the connection panel for all required cable connections.Four height-adjustable stainless steel feet are mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replaceme Marke Denon - Restauriert von Art-and-Sound Modell DP-47F Herstellernummer nicht zutreffend Antriebstyp Direktantrieb Farbe orange metallic EAN Nicht zutreffend

Restored Denon DP-47F Turntable Birds Eye Veneer Dark Blue Gloss The description of this item has been automatically translated. If you have any questions, please feel free to contact us. This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time specified on Ebay!Individual production! Please note the processing time stated on eBay!Restored fully automatic Denon DP-47F in fine wood veneer dark blue high glosswith Ortofon Vinyl Master Alpha MM systemMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skate Please note that wood is a natural product and each veneer differs in its structure.Our record players are lovingly assembled, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality cases are restored or newly manufactured using skilled craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was covered with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. On the back there is the connection panel for all required cable connections.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. Total weight 670g, diameter 43mm, height 20mm.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge; the long production time and the characteristic needle body are known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Stainless steel record weight:With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör receiveältlich and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 229 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Device feet XXL: 99 Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mm.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2MR Red (elliptical): 99 Ortofon 2MR Blue (diamond cut): 220 Ortofon 2MR Bronze (fineline diamond cut): 390Ortofon 2MR Black (Shibata diamond cut): 599 Ortofon 2MR Black LVB 250 (Shibata diamond cut): 949Audio-Technica VM740ML Dual MM (Microlinear Diamond Cut): 339Audio-Technica VM750SH Dual MM (Shibata Diamond Cut): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699 Audio-Technica AT-OC9XML Dual MC (Microlinear Diamond Cut): 599Audio-Technica AT-OC9XSH Dual MC (Shibata diamond cut): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799Cartridge MC System including installation: Branded cables. Ready-made analog audio cinch cable for wiring record players! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact reliability and corrosion protection are guaranteed by the 24-carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality. With a weight of 310g, it ensures that the record rests smoothly on the platter and runs smoothly. This record weight is in the middle weight class. It adds just enough weight to dampen the vibrations of the plate without putting strain on the bearing bushes. The suspension of the Thorens subchassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replaceme Marke Denon - Restauriert von Art-and-Sound Modell DP-47F Herstellernummer nicht zutreffend Antriebstyp Direktantrieb EAN Nicht zutreffend

? Product Information - PRODUCTS ? DENON DP-47F Fully Automatic Turntable (Junk Item) This DENON DP-47F turntable is being sold as a junk item for repair or parts purposes. Released in 1985, it features a quartz lock direct drive system and a Dynamic Servo Tracer Tonearm, known for its stable rotation and precise tracking. However, please note the following condition details: The sound output is not working (cause unknown). The unit shows visible scratches and signs of aging. The dust cover has minor surface scratches. Two needles are included; one is slightly bent. Set Includes: Main Unit, Head Shell + Cartridge (DL-80 MC), and EP Adapter. Operation Check: The sound output is not working. Speed change (33/45 RPM) is functioning properly, as is the pitch adjustment. Important Notice: This turntable is sold as-is for repair or parts purposes. Please review the photos carefully and understand the items condition before purchasing. No returns or refunds will be accepted for this item. ? Payment - PAYMENTS ?We accept PayPal and major debit/credit cards. Your item will be shipped within 7 business days after payment is confirmed.? Checkout - CHECKOUT ?Please confirm your shipping address before placing your order. We cannot change the address after the order is placed.? Shipping Information - SHIPPING ?Packaging: Items are carefully packed to ensure safe delivery.Shipping: Your order will be shipped within 7 business days after payment confirmation. Orders placed on weekends will be shipped on the following Monday or Tuesday. All orders include tracking numbers.? International Shipping - INTERNATIONAL SHIPPING ?We ship to all regions in the United States, Europe, Asia, the Middle East, Australia, and Canada. International shipping is handled by FedEx and Japan Post, ensuring safe and secure delivery.? Customer Service - CUSTOMER SERVICE ?If you have any questions or concerns, feel free to contact us anytime via eBay messages. We are here to help you promptly.? Return Policy - RETURN INFORMATION ?We offer a 30-day return and exchange policy. Please return the item in its original condition for a full refund. Note: For returns due to buyers convenience, the return shipping fee will be the buyers responsibility.? Customs Duty - CUSTOMS DUTY ?Import duties, taxes, and other charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine any additional costs before bidding or buying. We do not mark merchandise values below value or mark items as gifts – U.S. and international government regulations prohibit such behavior.

Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more and better interesting offers from us. Take a look at... Art and Sound Germany We would also be happy to restore your Denon to this look. RESTORED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss Caliente Red paintwith Ortofon Vinyl Master AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:Refurbished original case. It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.The connection panel for all required cable connections is located on the back.There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2MR Red (elliptical): 99 Ortofon 2MR Blue (elliptical, naked): 220 Ortofon 2MR Bronze (Fineline): 390Ortofon 2MR Black (Shibata): 599Ortofon 2MR Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation: Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/230V or 110V/120V inside (for USA and world wide)! Restored fully automatic Denon DP-47F with pickup and blue LED lighting Original housing in black high-gloss finishMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:The original case was refurbished and given several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Original device feet with rubber cushioning. All required cables are firmly connected to the turntable.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:The audio cable is firmly connected to the turntable. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Hood with hinges: 190Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 949Audio-Technica VM740ML Dual MM (Microlinear): 339Audio-Technica VM750SH Dual MM (Shibata): 439Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT33EV (elliptical): 499Audio-Technica AT33PTG/II (Microlinear): 599Audio-Technica AT33SA (Shibata): 799Audio-Technica AT-OC9XML Dual MC (Microlinear): 599Audio-Technica AT-OC9XSH Dual MC (Shibata): 699Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799 The audio cable is firmly connected to the turntable. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! We would also be happy to restore your Denon to this look. Restored Denon DP-47F silver moon wood veneer high glossHigh gloss finishPlease note that wood is a natural product. Each case differs in its veneer grain.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Frequency range: 20Hz - 50kHzSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was covered with wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Device feet:Spikes made of chrome-plated stainless steel. So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. Ortofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this Auction. Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Device feet XXL (Figure 8-10):  90 Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmNew hood incl. Hinge (new dust cover including hinge):  190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica VM95ML (microlinear): 179Audio-Technica VM95SH (Shibata): 219Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699Cartridge MC System including installation:Audio-technica AT33EV (elliptical, naked): 499Audio-technica ATPTG/II (microlinear): 599Audio-technica AT33SA (Shibata): 799Audio-technica OC9ML (microlinear): 599Audio-technica OC9SH (Shibata): 699Audio-technica OC9XSL (Special Line Contact): 799  Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! Restored fully automatic Denon DP-47F in fine wood veneerwith Ortofon Vinyl Master Alpha MM system Please note that wood is a natural product and each veneer differs in its structure.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was covered with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. Total weight 670g, diameter 43mm, height 20mm.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mm.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! With appropriate lighting, this turntable becomes an eye catcher! Restored fully automatic Denon DP-47F red glitter and high-gloss finishincluding Ortofon Vinyl Master Alpha MM systemMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateOur record players are lovingly put together and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device. Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing: The original case was refurbished, covered with high-quality effect foil and lavishly coated with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. A smooth, high-gloss surface is created. All required cables are permanently installed on the turntable.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mm.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 229 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Hinge: 190 Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (diamond cut): 220 Ortofon 2M Bronze (fineline diamond cut): 390Ortofon 2M Black (Shibata diamond cut): 599 Ortofon 2M Black LVB 250 (Shibata diamond cut): 949Audio-Technica VM740ML Dual MM (Microlinear Diamond Cut): 339Audio-Technica VM750SH Dual MM (Shibata Diamond Cut): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT-OC9XML Dual MC (Microlinear Diamond Cut): 599Audio-Technica AT-OC9XSH Dual MC (Shibata diamond cut): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799 The original case was refurbished, covered with high-quality effect foil and lavishly coated with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. A smooth, high-gloss surface is created. All required cables are permanently installed on the turntable. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Pan

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! RESTORED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss white lacquerwith Ortofon Vinyl Master AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:Refurbished original case. It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.The connection panel for all required cable connections is located on the back.There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

Individual production! Please note the processing time stated on Ebay.This turntable is available in 220/230V or 110V/120V (for example USA and world wide).You can find even more and better interesting offers from us. Take a look at... Art and Sound Germany We would also be happy to restore your Denon to this look.REVISED by ART-AND-SOUND Restored fully automatic Denon DP-47F bi-color black and metallic blueMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:The original case was refurbished and given several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2MR Red (elliptical): 99 Ortofon 2MR Blue (elliptical, naked): 220 Ortofon 2MR Bronze (Fineline): 390Ortofon 2MR Black (Shibata): 599Ortofon 2MR Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation: Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time specified on Ebay!Individual production! Please note the processing time stated on Ebay!Restored fully automatic Denon DP-47F in fine wood veneer dark blue high glosswith Ortofon Vinyl Master Alpha MM systemMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skate Please note that wood is a natural product and each veneer differs in its structure.Our turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was covered with precious wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by a rubber buffer.Resonances and feedback are thus effectively prevented. Total weight 670g, diameter 43mm, height 20mm.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 229 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Device feet XXL: 99 Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mm.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2MR Red (elliptical): 99 Ortofon 2MR Blue (diamond cut): 220 Ortofon 2MR Bronze (fineline diamond cut): 390Ortofon 2MR Black (Shibata diamond cut): 599 Ortofon 2MR Black LVB 250 (Shibata diamond cut): 949Audio-Technica VM740ML Dual MM (Microlinear Diamond Cut): 339Audio-Technica VM750SH Dual MM (Shibata Diamond Cut): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT-OC9XML Dual MC (Microlinear Diamond Cut): 599Audio-Technica AT-OC9XSH Dual MC (Shibata diamond cut): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

This turntable is available in 220V/50Hz or 110V/50/60Hz inside (for example USA or Japan)Discount and more interesting offers from us... Take a look at... Art and Sound GermanyIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay! REVISED DENON DP-47F Root wood look with hoodincluding MM system Ortofon VinylMaster AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Basic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmHousing: The original case was refurbished and reupholstered with high-quality furniture foil with a root wood look. All required cables are permanently installed on the turntable. Original device feet with rubber cushioning.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:High quality branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 229 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML Dual MM (Microlinear): 339Audio-Technica VM750SH Dual MM (Shibata): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Audio-Technica AT-OC9XML Dual MC (Microlinear): 599Audio-Technica AT-OC9XSH Dual MC (Shibata): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables. High quality branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! Restored fully automatic Denon DP-47F with hood, hinges & pickup systemOriginal housing in black high-gloss finishMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test. Housing:The original case was refurbished and given several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding. Original device feet with rubber cushioning. All required cables are firmly connected to the turntable.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Device feet XXL: 99 Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmCartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata): 949Audio-Technica VM740ML Dual MM (Microlinear Diamond Cut): 339Audio-Technica VM750SH Dual MM (Shibata Diamond Cut): 439Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT-OC9XML Dual MC (Microlinear Diamond Cut): 599Audio-Technica AT-OC9XSH Dual MC (Shibata diamond cut): 699Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799 With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit bo

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA or world wide)!REVISED by ART-AND-SOUND Restored fully automatic Denon DP-47F made of solid oiled pear woodWood is a natural product. Please note that the grain is always different. After purchasing, we will provide you with various variants from which you can choose your case. Its always pearwood...Wood is a natural product. Please note that the grain is always different. After the purchase you will receive different versions from which you can choose your case. It is always pear wood.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:Solid pearwood case and oiled. Base made of 16mm MDF. The connection panel for all required cable connections is located on the back. There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Complete revision: 220 Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Hinge (new dust cover including hinge): 190Cartridge MM system including installation:Ortofon 2M Red (elliptical): 99 Ortofon 2M Blue (elliptical, naked): 220 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899Audio-Technica VM740ML (microlinear): 339Audio-Technica VM750SH (Shibata): 439Audio-Technica VM760SLC (special line contact): 699 Cartridge MC System including installation: Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor

This turntable is available in 220V/50Hz or 110V/60Hz inside (for example USA, worldwide)!DENON DP-47F in original rosewood lookincluding new hood, Ortofon OM5E pickup and a complete overhaulReplacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high-quality types from PanasonicOrtofon OM5E cartridge:The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback.Microprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateTechnical data:Quartz direct drive / servo-controlled direct driveSynchronization fluctuations: Less than 0.010% in the servo systemTurntable: aluminum injection molding, 310mm diameterLinear drive motorSpeed ??control: Speed ??servo control via frequency detection and phase servo controlRepeat function of individual tracks possibleAutomatic plate size detection by sensorAnti-skating systemAutomatic speed detectionWeight: 8.5kgDimensions: W 434 H 179 D 410 mmHousing:The original case was refurbished and polished. The surface of the case is visually in excellent condition. All required cables are permanently installed on the turntable. Original device feet with rubber cushioning.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction:Cartridge MM system including installation:Ortofon 2M Red (elliptical): 90 Ortofon 2M Blue (elliptical, naked): 190 Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 590 Ortofon 2M Black LVB 250 (Shibata): 899Audio-Technica VM740ML Dual MM (Microlinear): 339Audio-Technica VM750SH Dual MM (Shibata): 439 Audio-Technica VM760SLC Dual MM (Special Line Contact): 699Cartridge MC System including installation: Audio-Technica AT33EV(elliptical): 499Audio-Technica ATPTG/II (microlinear): 599Audio-Technica AT33SA (Shibata): 799Audio-Technica AT-OC9XML Dual MC (Microlinear): 599Audio-Technica AT-OC9XSH Dual MC (Shibata): 699 Audio-Technica AT-OC9XSL Dual MC (Special Line Contact): 799This turntable is available in 220V/50Hz or 110V/60Hz inside (for example USA, worldwide)! Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high-quality types from Panasonic The Ortofon OM5E is a full-fledged pickup. It impresses with its temperament and neutral basic character. The OM5E features an elliptical stylus that allows for balanced and distortion-free playback. Speed ??control: Speed ??servo control via frequency detection and phase servo control The original case was refurbished and polished. The surface of the case is visually in excellent condition. All required cables are permanently installed on the turntable. Original device feet with rubber cushioning. The following parts are available as accessories and not included in this aucti

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! REVISED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss lacquerMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.The housing:It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.The connection panel for all required cable connections is located on the back.There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha (identical to VM White) is the entry into the series and is a great entry-level system for mid-range turntables.The audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. By using it, you increase the sound performance of your system. Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)!REVISED by ART-AND-SOUND Restored fully automatic Denon DP-47F with Ortofon VinylMaster AlphaBirds eye veneer black high glossMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, limit switch, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleBasic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmRevision type: standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Housing:The housing is made of MDF and consists of two individual parts, the housing and the housing base. They are connected to each other using screws.It has been professionally covered with fine wood veneer and several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.The connection panel for all required cable connections is located on the back. There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace

Individual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!This turntable is available in 220V/ 50Hz or 110V/60Hz inside (for example USA)! RESTORED by ART-AND-SOUND Restored fully automatic Denon DP-47F in high-gloss orange metallic paintwith Ortofon Vinyl Master AlphaMicroprocessor controlled direct drive fully automatic turntableQuartz high performance componentDynamic servo tracerStylus force Q-damp anti skateDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Technical data:Functions: start, stop, Speed: 33 1/3 & 45, Final shutdown, repeate, up-lifter, locate Drive: Servo controlled direct driveSpeed ??deviation: < 0.002%Synchronization fluctuations: < 0.010%wrmsRumble noise ratio: 78 db ( din B)Platter: die-cast aluminum, 310 mmTonearm: eff. Length: 220 mm, design: straight, dynamically balancedNeedle overhang: 16mm adjustableadjustable support weight: 0 - 3 gSystem carrier: PCL-40Scanning system: MC (DL-160) usedFrequency range: 20Hz - 50kHzrec. Support weight: 16 ± 3mNSpecial features:Microprocessor-controlled contactless Dynamic Servo Tracer tonearm with Q dampeningHigh speed stability thanks to the quartz-controlled tacho generator principleRevision type:  standardCircuit boards and contact points are cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.Basic dimensions:Width: 43.5cm, depth: 40cm, height approx. 17cmHousing:Refurbished original case. It was elaborately finished with several layers of high-gloss varnish sealed and polished with appropriate intermediate sanding.The connection panel for all required cable connections is located on the back.There are 4 height-adjustable stainless steel feet mounted on the floor.Pickup:New MM cartridge Ortofon Vinyl Master AlphaWith the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The Vinyl Master Alpha is the entry into the series and is a great entry-level system for mid-range turntables.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.following Parts are as Accessoriesör erhäliltic and not ingredient this auction:The following parts are available as accessories and not included in this auction: Replacement of all electrolytic capacitors (37 pieces) on the main and. Motor board made by high quality Panasonic . Circuit boards and contact points cleaned, photoresistors replaced. Adjustment/checking of the setting for the starting point (30/17), limit switch, support weight, function test and test run. VDE safety test.New hood incl. Cartridge MM system including installation:Cartridge MC System including installation: Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. Replace