Chord Dave DAC and mscaler with external power supply.in black color. Includes nordost heimdell 2 interconnect. Retails for 20k + DAC and mscaler are black color. Just used for 1 demo.

excellent condition. come with remote

For sale is an MCRU Fully Regulated Linear Power Supply for Chord Hugo TT2 / M Scaler.The MCRU Linear Power Supply is designed to reduce the electrical noise of your audio equipment. It consists of two separate boxes - the larger one housing the main power supply and the smaller case used for the final regulation stage. The latter is based on a low noise multi-stage filtered voltage reference, a low noise error amplifier and a high current low resistance MOSFET. Its also packed with low impedance capacitors to act as a local energy source. Normal 0 21 false false false BG X-NONE X-NONE The unit Im selling is designed for the Chord Hugo TT2 or the M-Scaler and has a 15V fully regulated DC output. Its the standard version of the model, so no mains lead (power cable) included. The device is in great condition with minor signs of use. Original box is not present, but Ill make sure to pack it extremely well. From a pet free, non smoking home.Will dispatch it tracked and fully insured either the same, or the next working day. Economy (via GLS) and standard (via DHL ground) shipping usually takes about a week, while Express delivery via DHL (air shipping) arrives in 1-2 business days (please dont pay attention to eBay estimates - they are assigned automatically and theres no way to edit them). In some cases, standard service might actually be cheaper than the economy one, so do pay attention at checkout. Condition and serial number are documented and recorded, so scammers - dont waste your time here. Please purchase only if you have 10+ feedback, or contact me prior placing your order. All of my perfect eBay feedback comes from selling expensive headphone gear, so buy with absolute confidence!Feel free to check my other listings as well. And last but not least, thanks for looking!

Normal 0 21 false false false BG X-NONE X-NONE For sale is a Chord Hugo M-Scaler Upsampling Digital Processor. Normal 0 21 false false false BG X-NONE X-NONE The M-Scaler is a unique, highly advanced upsampling component that redefines sound quality from digital audio. It uses the most advanced FPGA-based WTA (Watts Transient Alignment) filter technology to upscale standard 44.1kHz signal up to 705.6kHz (16x CD’s 44.1kHz native resolution), ready to be passed to a suitable DAC. When partnered with either of Chord Electronics dual-BNC-input DACs (such as the Qutest, Hugo TT2 and DAVE), it even extends its upscaling capability to 768kHz and sets an astonishing technical benchmark for digital audio performance. The unit Im selling is in great condition with minor sings of use. Comes double boxed including its remote control, power adapter, BNC and USB cables. From a pet free, non smoking home.An MCRU Linear Power Supply can be bought at an additional cost. Will dispatch the device tracked and fully insured either the same, or the next working day. Economy (via GLS) and standard (via DHL ground) shipping usually takes about a week, while Express delivery via DHL (air shipping) arrives in 1-2 business days (please dont pay attention to eBay estimates - they are assigned automatically and theres no way to edit them). In some cases, standard service might actually be cheaper than the economy one, so do pay attention at checkout. Condition and serial number are documented and recorded, so scammers - dont waste your time here. Please purchase only if you have 10+ feedback, or contact me prior placing your order. All of my perfect eBay feedback comes from selling expensive headphone gear, so buy with absolute confidence!Feel free to check my other listings as well. And last but not least, thanks for looking!

Chord Dave DAC and mscaler with external power supply.in black color. Includes nordost heimdell 2 interconnect. Retails for 20k + DAC and mscaler are black color. Just used for 1 demo.

Chord Dave DAC and mscaler with external power supply.in black color. Includes nordost heimdell 2 interconnect. Retails for 20k + DAC and mscaler are black color. Just used for 1 demo.

chord mscaler. Ex display - completely unused Perfect condition Original packaging and instructions Full warranty Rapid dispatch, tracked and insured Please contact us for further information

Chord Electronics Hugo M Scaler Upsampler Excellent Boxed All Accessories RRP 4195. Used with a Hugo TT2 DAC up until last year when I sold my Chord Sytem. This was sitting in its box ready for collection but with a change in circumstances the m scaler is free to be sold. I have been using this very successfully for the last week feeding a LAB12 DAC, but a change in streamer means this has to go to raise the funds. In fantastic condition with all original accessories. The PSU has never been used as I used with an MCRU PSU (on a separate listing). Comes with the original double box. Low starting price and no reserve. Check my feedback and bid with confidence. Also check out my other items.

Welcome to bid for The Chord Company Dual Digital Audio 2xBNC to 2xBNC Interconnectfor CHORD M-Scaler and HUGO TT2 or DAVE DAC combo. This is top quality digital interconnect cable dedicated to Chord Electronics MscalerMScaler and DAC (like TT2 or DAVE) combo built with unique and ultimate audio quality option for of connection digital signal components by 2 parallel wide band cables for ultra-low jitter and non corrupted audio signal transmission. This is definitely the top quality technology in digital audio. Use of a pair separated, even high quality digital cables is not enough here as proper interconnect for this system should provide the following features, critical for full quality performance1. Cables should be absolutely equal in length and form spatially stable configuration for absence of phase shift2. connectors must be of precise 75 Ohm impedance geometry, preferably gold plated to avoid intermetal barrier on MScaler connectors3.cables should be very uniform to avoid passive generated jitter.The Chord interconnect presented in this auction seems to be the only one meets all the above technical requirements and should be considered as the best one for application with MScaler Chord DAC comboThe interconnect is in good used and perfect working order, details are shown in pictures.Length is 60 cm, characteristic impedance of each cable is 75 Ohms Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side. Please note that this time we are only able to ship in 4-5 working days, so, delivery could be few days longer than usual, it can take up to 8-10 working days if you are in the UK or some 12 days for abroad. Sorry about inconvenience Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £16 quoted is initial estimation for EU only. Overseas delivery could cost from £16 (USA, China) to £22 (Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. Unfortunately we can not ship to Vietnam and Ukraine. Overseas delivery can take up to 12 working days We combine shipments, every second cable won to the same bidder will be sent in one package with the first one at postage rate for the one (heavy) item only.

Plixir Elite BDC Dual Linear Power Supply for the Chord Hugo TT & M Scaler - Immaculate - 230-15V6A Only bought this in January this year to accompany the CHORD HUGO M Scaler and Hugo TT2 (item for sale in separate listing)and is in an immaculate condition as minimal use. Came with 24 months manufacturers warranty so almost 20 months remaining.(invoice can be supplied). Certainly makes a significant difference to sound quality over the CHORD power supplies. Neat solution as it is one box that powers both items. Reason for sale is upgrading my entire system (please see other items in separate listings). Used by a responsible adult. Comes from a clean, smoke-free, pet-free, child-free home. Thank you.

CHORD HUGO M Scaler - Immaculate - in original box with unused accessories Only bought this M Scaler from new a few months ago and is in an immaculate condition as minimal use. Came with a 3 year manufacturers warranty (invoice can be supplied). Reason for sale is upgrading my entire system (please see other items in separate listings). Used by a responsible adult. Comes from a clean, smoke-free, pet-free, child-free home. Thank you.

Welcome to bid for The Chord Company Dual Digital Audio 2xBNC to 2xBNC Interconnectfor CHORD M-Scaler and HUGO TT2 or DAVE DAC combo. This is top quality digital interconnect cable dedicated to Chord Electronics MscalerMScaler and DAC (like TT2 or DAVE) combo built with unique and ultimate audio quality option for of connection digital signal components by 2 parallel wide band cables for ultra-low jitter and non corrupted audio signal transmission. This is definitely the top quality technology in digital audio. Use of a pair separated, even high quality digital cables is not enough here as proper interconnect for this system should provide the following features, critical for full quality performance1. Cables should be absolutely equal in length and form spatially stable configuration for absence of phase shift2. connectors must be of precise 75 Ohm impedance geometry, preferably gold plated to avoid intermetal barrier on MScaler connectors3.cables should be very uniform to avoid passive generated jitter.The Chord interconnect presented in this auction seems to be the only one meets all the above technical requirements and should be considered as the best one for application with MScaler Chord DAC comboThe interconnect is in good used and perfect working order, details are shown in pictures.Length is 60 cm, characteristic impedance of each cable is 75 Ohms Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side. Please note that this time we are only able to ship in 4-5 working days, so, delivery could be few days longer than usual, it can take up to 8-10 working days if you are in the UK or some 12 days for abroad. Sorry about inconvenience Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £16 quoted is initial estimation for EU only. Overseas delivery could cost from £16 (USA, China) to £22 (Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. Unfortunately we can not ship to Vietnam and Ukraine. Overseas delivery can take up to 12 working days We combine shipments, every second cable won to the same bidder will be sent in one package with the first one at postage rate for the one (heavy) item only.

Chord Electronics Mscaler In Black. Excellent condition. No visible marks or blemishes. Full working order. Makes digital sound amazing - listen to all your music above 44.1 kHz - upto 768kHz. Usually partners Chord DACs but can also be used on other dacs. Rob Watts masterpiece. Sold as seen in photos and provided with box

If you have a Chord DAC and MScaler this is the pair of cables to connect them. QED Silver Signature solid core BNC – BNC cable, fitted with Yarbo (of Germany) audiophile gold plated COPPER (Not the usual Brass) BNC plug, a unique construction to Audio-Maniacs. TWO CABLES supplied - for the Chord MScaler to Qutest/TT2/DAVE for example.New old stock cable and new connectors. Assembled in the UK by skilled hand. QED no longer make BNCs so I have searched the world and found these excellent audiophile quality connectors from Yarbo of Germany. Most BNCs are designed for CCTV systems, so I was very pleased to find an audiophile quality design made from COPPER, not brass! These are higher quality than the QED versions and fit QED Signature 75Ohm cable perfectly.Assembled by hand in the UK. Silver plated, solid caore 99.999% Oxygen Free Copper, triple shielded (2x braid and 1x foil) and true 75 Ohm construction. Burned in using the Tara Labs Cascade file. Please see the excellent 100% feedback I have received for hundreds of QED digital and analogue cables, including cables for delighted Chord owners.

QED Silver Reference BNC – BNC cable, fitted Yarbo (of Germany) audiophile gold plated copper BNC plug, a unique construction to Audio-Maniacs. TWO CABLES supplied - for the Chord MScaler to TT2/DAVE for example.New old stock cable off-the-reel and new connectors. I can make any length you require - please email for me for other lengths!QED no longer make BNCs so I have searched the world and found these excellent audiophile quality connectors from Yarbo of Germany. Most BNCs are designed for CCTV systems so I was very pleased to find an audiophile quality design made from COPPER, not brass! These are higher quality that the QED versions and fit QED Silver Reference 75Ohm cable perfectly.Assembled by hand in the UK. Silver plated, 99.999% Oxygen Free Copper, triple shielded (2x braid and 1x foil) and true 75 Ohm construction. Burned in using the Tara Labs Cascade file. Please see the excellent 100% feedback I have received for hundreds of QED digital and analogue cables.

QED Silver Reference BNC – BNC cable, fitted Yarbo (of Germany) audiophile gold plated copper BNC plug, a unique construction to Audio-Maniacs. TWO CABLES supplied - for the Chord MScaler to TT2/DAVE for example.New old stock cable off-the-reel and new connectors. I can make any length you require - please email for me for other lengths!QED no longer make BNCs so I have searched the world and found these excellent audiophile quality connectors from Yarbo of Germany. Most BNCs are designed for CCTV systems so I was very pleased to find an audiophile quality design made from COPPER, not brass! These are higher quality that the QED versions and fit QED Silver Reference 75Ohm cable perfectly.Assembled by hand in the UK. Silver plated, 99.999% Oxygen Free Copper, triple shielded (2x braid and 1x foil) and true 75 Ohm construction. Burned in using the Tara Labs Cascade file. Please see the excellent 100% feedback I have received for hundreds of QED digital and analogue cables.

QED Silver Reference BNC – BNC cable, fitted Yarbo (of Germany) audiophile gold plated copper BNC plug, a unique construction to Audio-Maniacs. TWO CABLES supplied - for the Chord MScaler to Qutest/TT2/DAVE for example.New old stock cable off-the-reel and new connectors. I can make any length you require - please email for me for other lengths!QED no longer make BNCs so I have searched the world and found these excellent audiophile quality connectors from Yarbo of Germany. Most BNCs are designed for CCTV systems so I was very pleased to find an audiophile quality design made from COPPER, not brass! These are higher quality that the QED versions and fit QED Silver Reference 75Ohm cable perfectly.Assembled by hand in the UK. Silver plated, 99.999% Oxygen Free Copper, triple shielded (2x braid and 1x foil) and true 75 Ohm construction. Burned in using the Tara Labs Cascade file. Please see the excellent 100% feedback I have received for hundreds of QED digital and analogue cables.

Description Condition: USED Operation has been confirmed. Near MINT. All accessories are included. ShippingStandard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment. International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost.These charges are the buyers responsibility.Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Chord Electronics Hugo M-Scaler, Black, Excellent Condition. No imperfections of any kind. Comes complete with all original packaging and accessories. Pictures will be uploaded soon. Thank you for looking.

Chord Electronics Hugo M Scaler in Sliver (w/ Moon Audio Sliver Dragon BNC to BNC cables) -- Like New. The M Scaler will include all original accessories plus a pair of 1.5 ft Moon Audio Silver Dragon cables with BNC to BNC connectors. It will be sent with the original box and packaging

If you have a Chord DAC and MScaler this is the pair of cables to connect them. QED Silver Signature solid core BNC – BNC cable, fitted with Yarbo (of Germany) audiophile gold plated COPPER (Not the usual Brass) BNC plug, a unique construction to Audio-Maniacs. TWO CABLES supplied - for the Chord MScaler to Qutest/TT2/DAVE for example.New old stock cable and new connectors. Assembled in the UK by skilled hand. QED no longer make BNCs so I have searched the world and found these excellent audiophile quality connectors from Yarbo of Germany. Most BNCs are designed for CCTV systems, so I was very pleased to find an audiophile quality design made from COPPER, not brass! These are higher quality than the QED versions and fit QED Signature 75Ohm cable perfectly.Assembled by hand in the UK. Silver plated, solid caore 99.999% Oxygen Free Copper, triple shielded (2x braid and 1x foil) and true 75 Ohm construction. Burned in using the Tara Labs Cascade file. Please see the excellent 100% feedback I have received for hundreds of QED digital and analogue cables, including cables for delighted Chord owners.