Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Welcome to bid for The Chord Company Cobra Plus to mini- XLR Terminated Balanced Interconnect. This is a very high quality interconnect designed especially for use with Vynl phonostage from Musical Fidelity . It is built with the latest incarnation of the classic Cobra audio cable - the CobraPlus version, one of the very best cables dedicated to balanced connection system. Cable made with the best technology, double shielded, one of screening layers is high density plated braid and another is aluminized mylar to protect against high frequency interference. Cables are terminated with the Chord marked gold plated RCA connectors and mini-XLR connectror with gold contacts to connect to balanced input of Musical Fidelity Vynl phonostage TECHNICAL PARAMETERS: INPUT/OUTPUT: mini XLR gold plated and 2c RCA connectors CABLE LENGTH: 90 cm (94 cm tip to tip)Delivery and possible return. Shipping cost of £4.85 quoted is related to UK mainland destinations only.Attention of International bidders: we will be pleased to ship worldwide. Shipping cost of £14 quoted is initial estimation for EU only.we will be pleased to ship worldwide. Overseas delivery could cost from £19 (USA, China) to £24 (Australia, South America) We charge an actual minimal for international shipment, please, ask for quotation before bidding to be sure. We combine shipments, just ask for lower postage cost if bid for more than one item. Please, note that we ship within 4-5 working days after the payment is cleared. Please, allow few extra days for delivery even if you are in UK, overseas delivery can take up to 10-12 working days, sorry about inconvenience Item is fully tested and return is accepted within 2 week after delivery and exclusively in shape as it was shipped, i.e. perfect working condition. In this case 100% of auction price and shipment cost will be refunded. Return of nonworking, damaged or scratched item is not accepted and will be not refunded. Return shipment cost is on Buyer’s side.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim snaic cable SNAXO 24 to NAP250 Custom 2x 4pin DIN to XLR Active Crossover Basically this will convert you snaxo so that the channels can be split horizonally instead of vertically without having to mess about with getting perfect matching amps. With the cable method you can always revert back to left and right. Picture is for illustration only but I will use chord cables. I can make the snaxo 4 pins to XLR (NAP 250) or 4 pins (NAP 180). Naims intention are to have 2x 250s equal amps but they are not dual mono constructed we all know no 2 amps are the same which is why we want to split them vertically to get it working symmetrically otherwise you an uneven left and right sounding system. For a fully active system that cost nearly 10k that is a major correction.Typical setup.Linn LP12Naim NAC 52 preampNaim SupercapNaim Snaxo 24 <----Naim Hicap2x Naim 250 NAPNaim SBL SpeakersI can also make it so that you can use the NAP 250 for the lower end and the NAP180 for the top end. Happy to post or collection is available.

Naim snaic CHORD COBRA 1M. 4 PIN DIN 2 X RCA phono pre AMP or Hicap to AMP NAIM HAS THE BEST PRE AMP TO MAKE THE MUSIC MORE INVOLVING BUT THERE ARE BETTER ALTERNATIVE POWER AMPS OUT THERE SUCH AS BRYSTON. THIS CABLE ALLOWS YOUR TO USE THE OUT PUT FROM THE PREAMP OR HICAP SUPERCAP (4 pin) AND CONNECT IT VIA PHONO CABLE TO ANY POWER AMP. YOU CAN USE THE NAIM 52 80 72 ETC Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Chord Cobra 3 5 Pin Din - 2 RCA. This cable is in excellent condition and has been refurbished to a high standard by myself. I have been repairing and re-terminating cables since I first got involved with hifi around 2004. Joints have been soldered using WBT 4% Silver solder for improved quality. 5 Pin din - 2 RCA Upgraded Silver Vee 3 plugs New 5 pin din connector 1m cable In excellent condition Fully working Comes in original wooden box Free UK delivery

Chord Company Cobra 2 Din For Naim. Locking din plugs at both ends. Ideal for linking a naim source to a pre amp. Will only post to uk

Chord Cobra 2 Locking Din for Naim separate channels version. This is the upgraded version which has separate channels for l/r and then joins at each locking din plug Locking din plugs at both ends. Ideal for linking a naim source to a pre amp.Will only post to uk

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim snaic cable SNAXO 24 to NAP250 Custom 2x 4pin DIN to XLR Active Crossover Basically this will convert you snaxo so that the channels can be split horizonally instead of vertically without having to mess about with getting perfect matching amps. With the cable method you can always revert back to left and right. Picture is for illustration only but I will use chord cables. I can make the snaxo 4 pins to XLR (NAP 250) or 4 pins (NAP 180). Naims intention are to have 2x 250s equal amps but they are not dual mono constructed we all know no 2 amps are the same which is why we want to split them vertically to get it working symmetrically otherwise you an uneven left and right sounding system. For a fully active system that cost nearly 10k that is a major correction.Typical setup.Linn LP12Naim NAC 52 preampNaim SupercapNaim Snaxo 24 <----Naim Hicap2x Naim 250 NAPNaim SBL SpeakersI can also make it so that you can use the NAP 250 for the lower end and the NAP180 for the top end. Happy to post or collection is available.

The Chord Company Cobra 2 - Audiophile Interconnect Cables, 101cm end-to-end, Superb Condition, Working Perfectly Superb Quality British Cables in excellent condition - perfect for connecting any high-quality audio equipment that needs an Audiophile grade RCA interconnect cable They are in extremely good condition, almost mint Two individual cables making a stereo pair Very highly regarded cable with excellent reviews, working perfectly Please study all the photos carefully, they form an important part of the description eBay compress the photos I upload and they lose clarity - a link to a gallery of high-resolution, uncompressed photos is available on request (Im not allowed to include the link here) ANY QUESTIONS, PLEASE ASK Delivery within the UK by Royal Mail 1st class - FREE Delivery within Europe by Royal Mail Tracked - £10.00 Delivery to USA & Canada by Royal Mail Tracked - £13.50 WILL BE WELL PACKED TO ENSURE SAFE ARRIVAL CLICK HERE to see my other Hi-Fi items

Chord Cobra 2 2 RCA Phono - 5 Pin DIN For connecting a non-Naim source to a Naim amp (or other with 5-pin DIN input) Silver-plated cores 1 metre length Excellent condition New equivalent (Shawline) is £250 Free UK postage This is a top quality interconnect cable that’s designed for connecting a non-Naim Hi-Fi source with RCA phono sockets to a Naim amp (or other brand with 5-pin DIN input, such as Quad or B&O). It has the ring-lock type connection that suits Naim products from the ‘Olive’ series (late ‘80s) to the present day. At the source end, it uses high quality, gold-plated RCA phono plugs with Chord branding. The Cobra 2 model was third in the Chord Company line-up, sitting above the Chrysalis and Crimson models. It’s the first model in the Chord Company range to feature silver-plated cores, giving a very smooth, detailed sound. It’s also better shielded than than the cheaper models, making it more resistant to interference. Today’s equivalent to the Cobra model is the Shawline. With DIN plugs and a 1 metre length, the new cost is £250. Payment PayPal (when posting only)Cleared cheque (posting or collection)Cleared bank transfer (posting or collection)Cash (collection only)

The Chord Company Cobra 2 RCA Single 1 m. In good used condition.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. This is for 1x1m cable will also work with a naim 250. You will need a pair of these if you wish to use it with NAP 135 amps assuming you got a hicap or supercap.

Naim chord cobra 4-pin DIN to XLR Cable preamp to 250 power amps. Dispatched with Royal Mail 1st Class. 2x 1m cables will also work with a pair of 135 amps assuming you got a hicap or supercar.

Naim SNAIC 4 Pin to 4 Pin Din 1m Chord Cobra for Pre 2 Power amplifier - NAP The way to set this up is that you need to have your own independent power supply to your pre amp. Can be use with DAC 1 to Power amp. Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.

Naim snaic cable SNAXO 24 to NAP250 Custom 2x 4pin DIN to XLR Active Crossover Basically this will convert you snaxo so that the channels can be split horizonally instead of vertically without having to mess about with getting perfect matching amps. With the cable method you can always revert back to left and right. Picture is for illustration only but I will use chord cables. I can make the snaxo 4 pins to XLR (NAP 250) or 4 pins (NAP 180). Naims intention are to have 2x 250s equal amps but they are not dual mono constructed we all know no 2 amps are the same which is why we want to split them vertically to get it working symmetrically otherwise you an uneven left and right sounding system. For a fully active system that cost nearly 10k that is a major correction.Typical setup.Linn LP12Naim NAC 52 preampNaim SupercapNaim Snaxo 24 <----Naim Hicap2x Naim 250 NAPNaim SBL SpeakersI can also make it so that you can use the NAP 250 for the lower end and the NAP180 for the top end. Happy to post or collection is available.

Naim snaic CHORD COBRA 1M. 4 PIN DIN 2 X RCA phono pre AMP or Hicap to AMP NAIM HAS THE BEST PRE AMP TO MAKE THE MUSIC MORE INVOLVING BUT THERE ARE BETTER ALTERNATIVE POWER AMPS OUT THERE SUCH AS BRYSTON. THIS CABLE ALLOWS YOUR TO USE THE OUT PUT FROM THE PREAMP OR HICAP SUPERCAP (4 pin) AND CONNECT IT VIA PHONO CABLE TO ANY POWER AMP. YOU CAN USE THE NAIM 52 80 72 ETC Excellent control over the standard naim cables. Less naim sounding but more transparant. Down to a preference I say. I only have 2 of these and worth an upgrade.