Description
Please Note There are two boxes with this:Big box 106LBS 44x16x33Small box 16LBS 17x14x20the shipping total be additional $20.00 to $50.00 more than shows under shipping Amplifier section: USA model: AC 120 V, 60 Hz RMS output power (reference): 600 W + 600 W (per channel at 4 ohms, 1 kHz) Front speaker Power Output (rated): 350 W + 350 W (at 4 ohms, 1 kHz, 1% THD) Subwoofer RMS output power (reference): 500 W + 500 W (per channel at 5 ohms, 100 Hz) USB section Supported bit rate WMA: 48 kbps – 192 kbps, VBR, CBRAAC: 48 kbps – 320 kbps, VBR, CBRWMA: 44.1 kHz AAC: 44.1 kHzSupported USB device Mass Storage Class Maximum current 500 mA Disc/USB section Supported bit rateMPEG1 Layer-3: 32 kbps – 320 kbps, VBRMPEG2 Layer-3: 8 kbps – 160 kbps, VBRMPEG1 Layer-2: 32 kbps – 384 kbps, VBRSampling frequenciesMPEG1 Layer-3: 32 kHz/44.1 kHz/48 kHzMPEG2 Layer-3: 16 kHz/22.05 kHz/24 kHzMPEG1 Layer-2: 32 kHz/44.1 kHz/48 kHz Disc player sectionSystem Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6 ?W * This output is the value measurement at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture.Frequency response 20 Hz – 20 kHzSignal-to-noise ratio More than 90 dBDynamic range More than 88 dB Tuner sectionFM stereo, FM/AM superheterodyne tuner Antenna:FM lead antennaAM loop antenna FM tuner sectionTuning rangeUSA and Brazilian models: 87.5 MHz – 108.0 MHz (100 kHz step)Other models: 87.5 MHz – 108.0 MHz (50 kHz step) AM tuner sectionTuning rangePan American and Australia models: 531 kHz – 1,710 kHz (9 kHz step) 530 kHz – 1,710 kHz (10 kHz step)Saudi Arabian model: 531 kHz – 1,602 kHz (9 kHz step)Other models: 531 kHz – 1,602 kHz (9 kHz step) 530 kHz – 1,610 kHz (10 kHz step) Bluetooth sectionCommunication system: Bluetooth Standard version 3.0 + EDR (Enhanced Data Rate) Output Bluetooth Standard Power Class 2 Maximum communication range Line of sight approx. 10 m1) Frequency band 2.4 GHz band (2.4000 GHz – 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported codecs SBC (Sub Band Codec) AAC (Advanced Audio Coding) 1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc. 2) Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. SpeakersFront speaker SS-GPX88 for MHC-GPX88 SS-GPX77 for LBT-GPX77/ MHC-GPX77 SS-GPX55 for LBT-GPX55/ MHC-GPX55 SS-GPX33 for MHC-GPX33 Speaker system SS-GPX88/GPX55/GPX33: 2-way, Bass reflex SS-GPX77: 3-way, Bass reflex Speaker unit Woofer (cone type): 200 mm (7 7/8 in) Tweeter (horn type): (SS-GPX88/GPX77) 25 mm (1 in) (SS-GPX55/GPX33) 20 mm (13/16 in) Subwoofer (cone type): (SS-GPX77) 200 mm (7 7/8 in) Rated impedance SS-GPX88/GPX55/GPX33: 4 ohms SS-GPX77: HIGH: 4 ohms LOW: 8 ohms Dimensions (w/h/d) (Approx.) SS-GPX88: 360 mm × 604 mm × 330 mm (14 1/4 in × 23 7/8 in × 13 in) SS-GPX77: 360 mm × 604 mm × 390 mm (14 1/4 in × 23 7/8 in × 15 3/8 in) SS-GPX55/GPX33: 290 mm × 395 mm × 320 mm (11 1/2 in × 15 5/8 in × 12 5/8 in) Mass (Approx.) SS-GPX88: 12.2 kg (26 lb 15 oz) SS-GPX77: 14 kg (30 lb 14 oz) SS-GPX55/GPX33: 6.9 kg (15 lb 4 oz) Quantity: 2 pieces SubwooferSS-WGP88 for MHC-GPX88 SS-WGP55 for LBT-GPX55/ MHC-GPX55 Subwoofer system 1-way, Bass reflex Speaker unit Subwoofer: 250 mm (9 7/8 in), cone type Rated impedance SS-WGP88/WGP55: 5 ohms Dimensions (w/h/d) (Approx.) SS-WGP88/WGP55: 360 mm × 395 mm × 330 mm (14 1/4 in × 15 5/8 in × 13 in) Mass (Approx.) SS-WGP88: 8.5 kg (18 lb 12 oz) SS-WGP55: 8.6 kg (18 lb 16 oz) Quantity: MHC-GPX88: 2 pieces LBT-GPX55/MHC-GPX55: 1 piece Illumination that amplifies the user experienceMHC-GPX88 use illumination to enliven parties and elevate the user experience. Designing light shows was central in this project. That’s why we developed a simulator that can be freely programmed to produce an array of patterns on a multi-LED system. The simulator enabled more organic sequences, with dynamic and sophisticated movement, optimal coloring for the multi-LED system, and lighting that’s in closer sync with the music. Performances have never been this engaging. Sound, light, and color in syncAnother highlight of both systems is that you can choose your favorite patterns of lighting animation and colors. Choose a pattern that fits the occasion from four options. At the extremes, there’s a powerful, fast-paced mode inspired by dance clubs and live performances, and a relaxing mode that’s an elegant accompaniment in more intimate listening scenarios. In colors, six patterns are available, such as Passion, Cool, and Fresh. Together, the animation and colors merge with the music as if a DJ were mixing them. In this way, light shows are also designed to match the style of music well. MHC-GPX88 are the perfect way to set the right tone for events. GeneralPower requirements USA model: AC 120 V, 60 HzMexican model: AC 120 V – 240 V, 60 HzOther models: AC 120 V – 240 V, 50/60 Hz Power consumptionMHC-GPX88: 350 WDimensions (w/h/d) (excl. speakers) (Approx.) 270 mm × 363 mm × 364 mm (10 3/4 in × 14 3/8 in × 14 3/8 in)Mass (excl. speakers) (Approx.) HCD-GPX88/GPX77/GPX55/ GPX33: 5.2 kg (11 lb 8 oz)Supplied accessories Remote control (1) R6 (Size AA) batteries (2) FM lead/AM loop antenna (1) Spacer (MHC-GPX88 only) (2) Speaker pads (MHC-GPX88 only) (16) Speaker pads (LBT-GPX77/ MHC-GPX77 only) (8)Design and specifications are subject to change without notice.
Live search