(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 800X (Bryston 7) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 800X (Bryston 7) [ Listing is for 1 amp - however we have 8 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 800X is almost identical to a Bryston 7B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. Unit come with new 6x30mm 150V fast-blow fuses: The 800X is set up as a monoblock amp, (two mono channels within set up in push-pull configuration) and there are no switches to change from series or parallel. Inside are two identical power amplifiers set for bridge operation for 500 watts into 8 ohms or 800 watts into 4 ohms. Conversion to 2-channel stereo operation is possible by disabling the input module internally. Step-by-step instructions to convert the 800X to a stereo amp can be found below however we assume no responsibility for any issues/damage arising from modifying these amplifiers: https://www.audiocircle.com/index.php?topic=88518.20 UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Listed is a Bryston BHA-1 balanced headphone amplifier in good condition with the 17 faceplate, internal analog power supply, and power cable. This is a high-end headphone amplifier retailing at $2495 USD. I have to sell it since I realized I dont use headphones much anymore to warrant keeping this amp. It does not come with the original box and some paint for the text and screws have worn off over time, but the amplifier itself is in perfect working condition and sounds phenomenal. Very neutral sounding amplifier with really standout tight bass impact and detail retrieval, and is made with 6 fully discrete Class A Bryston operational amplifiers. The amplifier also uses balanced dual-mono circuitry, and has the relatively rare left/right balance control built in. In regards to how much power it has, the BHA-1s a strong enough headphone amplifier for about 98% of headphones on the planet except the most power hungry ones with: Load at 32ohms: High Gain - 9.65 V OUT @ 2.9W Low Gain - 4.84V OUT @ 578mW Load at 300 ohms: High Gain - 10.8 V OUT @ 390mW Low Gain - 5.40 V OUT @50mW

Bryston 4Be Amplifier, Never rack mounted, Very, Very Clean, low hours... Factory shipping box. This is the super rare 4Be pro version. The e is for engineering. This model was just before the NRB.It has XLR and 1/4 TRS connections. I will include a pair of gold-plated 1/4 TRS to RCA adaptors also. The pro models have the potentiometers in the front, just above the number 4, to adjust the right and left channels independently. Brystons 4B stereo power amplifier consists of two amplifier modules, each with its own ±85v power supply, which can be operated independently or combined (MONO mode) to form a single 800 watt amplifier (8? load) in a 3 rack height chassis. Operated independently (DUAL mode) each channel can deliver 250 watts into 8? (or 400 watts into 4?). Each of the two amplifier modules use 8 of Brystons custom power transistors, for a total of 16 output devices per 4B. It has not been used for about 15 years. Sent to Bryston Canada early this year for a complete checkup. I wanted them to make sure it was operating at factory specs. Received it back in June. A copy of the receipt is included. I only opened the box to powered it on and take photos. Played it for about an hour. It sounds fantastic!!! You will not find a cleaner 4b amplifier. Only thing it needs is some new rubber stick on feet on the bottom. You can find them here on eBay pretty cheap. Never been rack mounted, no scratches on the front panel, top plate or sides. Please see all photos. Does not come with a power cord. FREE SHIPPING!!! All states except Hawaii and Alaska... No international shipping!!! Sorry.

Excellent condition, full working order.

?ª˜¨¨?ª˜¨¨¨¨˜ª¤.¸*•.¸*•¸? ? Super eBayer ??¸•*¸.•*´¸.¤ª˜¨¨¨¨˜ª?¨¨˜ª? I do provide excellent service to every buyer. Please see my feedback before you bid, and see that everyone is happy with my prices, my product .... and my service. BRYSTON BP-20 USA Voltage power supply - MPS-1 ENJOY THE MUSIC!!!! Please read description. I purchased an entire recording studio. It came with a lot of gear that was new. This is one of the pieces. It appears very clean, still in wrapping with Bryston tape sealing it. It also could have come from Bryston directly, but no matter what, it is sealed with Bryston tape. It also comes with the booklet shown. I am selling it as an open box. I will guaranteed it functioning perfectly, and through the plastic, I cannot see anything that looks like it has ever been touched. Sold AS-IS , but I will guaranteed it working perfectly, and clean. No parts swappers. I can tell. LOL. Shipping is $55 Please see my other items up for sale on ebay. * Item will ship within 3 days of payment, and will be delivered to buyers registered Paypal physical address. Also, sorry but no zero feedback bidders, please!! * U.S.A CONTINENTAL SHIPPING (48 states only) * After you receive your item, if you feel the there is a discrepancy between the auction description and the item you received, then please contact me immediately to allow me the opportunity to resolve any problem. I aim to please!

This Bryston 7b lived in our audio room before we closed the doors for good. Never had an issue and it functions flawlessly. It has lived it’s whole life in a studio equipment room rack, and had regular maintenance done by our house engineers. On a side note here, I do not store it on top of my Marshall amp, that was just the best spot to grab a few pics amidst the mess in our basement (our basement is being remodeled so it’s very out of sorts!!)

Used - Tested & Working in Great Condition! This is backed by our 30 day money back guarantee! Sale INCLUDES: Bryston 10B-LRB1 Active Crossover 10B Sale includes only items pictured Please read all policies below prior to sending an offer or making the purchase.Auction Policies Used Item Disclaimer- Because this item is used it will show minimum to moderate cosmetic wear. Please view each of the pictures to get a better idea of condition specifics. Please ask any questions regarding the condition of the item prior to making an offer or purchase. Customer Service:5 Star service is our number one priority. Our office hours are Monday-Friday 9:00AM to 5:00PM. Feel free to contact us anytime and we will do our best to address any questions or concerns. Shipping: There will be a shipping surcharge for items shipped to Alaska, Hawaii, and Puerto Rico. Please contact us for total cost before purchase. Thank you.Your purchase will be processed, professionally packaged, and quickly shipped by our shipping department. Your item(s) will be shipped via USPS, FedEx, or UPS. NOT ALL ITEMS ARE ELIGIBLE TO BE SHIPPED TO A P.O. BOX.A HOME OR BUSINESS ADDRESS MAY BE REQUIRED.PLEASE CONTACT US PRIOR TO PURCHASEIF A P.O. BOX IS YOUR ONLY OPTION Customer Pick Up: If you are in or around the Seattle area and would like to pick your purchase up in person, you can come by and pick it up during business hours. Just send us a message with the listing number and we will give you our address. Returns due to Compatibility or Buyers Remorse: Customers are responsible for checking compatibility of all parts. Returns due to incompatibility or buyers remorse will be charged a 20% restocking fee. Refunds will be processed upon return of item in good working order and verification of serial numbers. Warranty Info: Warranties, if available, are listed in each item description. If you do not agree to these terms, do not make the purchase or send an offer.

FREE SHIPPING TESTED, WORKING PULL Specifications:Three channel power amplifier120 watts rms/ch into 8 Ohms, all channels driven, 20 Hz - 20 kHz200 watts rms/ch into 4 OhmsFrequency response 20 Hz - 20 kHz ± 0.01 dBInput impedance 50 kOhmsDamping factor 500Sensitivity 0.75V rms for full output into 8 OhmsTHD 0.02%S/N 112 dBSize 5 1/2H x 19W x 17DWeight 37 pounds

Bryston 7B Power AmplifierUpgraded by professionals a couple of years ago, with new/larger capacitors (12,000uF replacing 6,800uF), new Nichicon Muse bipolar capacitor on the feedback loop, added bridge filter to eliminate transformer buzz due to DC content in power supply.Fine tuned bias and output offset. Local pickup preferred. Please contact for shipping or other delivery options.

I am selling it because I bought a few amplifiers trying to see what I like best. I am going to have someone custom build me a pure Class A amplifier. That amp will be 30W per channel but use 200W at idle. I will use it over winter where it will double as a space heater. Class AB like this Bryston are the way to go for most setups. I am selling this to finance my Class A amplifier. This amp sounds awesome, better than any live music venue uses. Im pretty sure anyway, Ive gone to a few. Although the amp in theory still has 8+ years on Brystons famous 20 year warranty, it is moot because I dont have the original receipt. I am not sure from what authorized seller it was purchased from but it is working great! Note that I will be getting a box from Bryston so I will not be able to ship this until until after I get the box, maybe 1 week from now.I will only ship to US and Canadia.

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL B IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 800X (Bryston 7) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 800X (Bryston 7) [ Listing is for 1 amp - however we have 8 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 800X is almost identical to a Bryston 7B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. Unit come with new 6x30mm 150V fast-blow fuses: The 800X is set up as a monoblock amp, (two mono channels within set up in push-pull configuration) and there are no switches to change from series or parallel. Inside are two identical power amplifiers set for bridge operation for 500 watts into 8 ohms or 800 watts into 4 ohms. Conversion to 2-channel stereo operation is possible by disabling the input module internally. Step-by-step instructions to convert the 800X to a stereo amp can be found below however we assume no responsibility for any issues/damage arising from modifying these amplifiers: https://www.audiocircle.com/index.php?topic=88518.20 UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Bryston BDA-2 DAC - Silver - Boxed with all original accessories. Will post insured, UK ONLY Fully Working, superb condition. Relisted due to reduction in ebay final fees.

Experience the powerful sound of the Bryston 3b Solid State Amplifier, made in Canada. With its sleek black color and reliable brand, this stereo amplifier is perfect for any home audio setup. Whether youre listening to music, watching movies, or playing games, this amplifier will enhance your audio experience. Featuring high-quality components and a durable build, the Bryston 3b provides top-notch performance without compromising on style. This amplifier is ideal for music enthusiasts who want to enjoy studio-quality sound in the comfort of their own home. Get your hands on this amazing amplifier today and elevate your audio experience. Experience audio nirvana with the Bryston 3B Stereo Amplifier. With outstanding sound performance, its a true masterpiece for audiophiles. Bryston quality and longevity is legendary, and this unit is another fine example. It weighs about 35 pounds Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape. 100 Watts / Channel @ 8 , 200 Watts / Channel @ 4 400 Watts Bridged/Mono @ 8

Hier biete ich einen Katalog an:Here you can purchase a catalog:Ici je propose un catalogue:Hier bied ik een catalogus aan: Prospekt Bryston SP 1.7 Preamplifier/Processor, vermutlich von 2002. Englische Ausgabe, English edition.Versand weltweit, perfekte Verpackung!Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Englisch, English, GB Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 6 Format, size: 27,9 x 21,6 cmGewicht, weight: 0,032 kgBitte beachten Sie die Fotos! Note photos, please! Veuillez noter les photos! Let op de fotos!

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift Audio 6/2002 , darin ein Testbericht der Vorstufe/Endstufe Bryston 25 BPS und 14 BSST. Foreign customers welcome! Worldwide shipping in very safe packaging! Drucknummer/print number: ohne, without Sprache/language: Deutsch, German Zustand/condition: hervorragend, excellent Seitenanzahl/pages: 4 Format/size: 28 x 21 cm

Hier biete ich einen Katalog an:Here you can purchase a catalog:Ici je propose un catalogue:Hier bied ik een catalogus aan: Prospekt Bryston B-60 Integrated Amplifier, vermutlich von 2002. Englische Ausgabe, English edition.Versand weltweit, perfekte Verpackung!Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Englisch, English, GB Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 4 Format, size: 27,9 x 21,6 cmGewicht, weight: 0,022 kgBitte beachten Sie die Fotos! Note photos, please! Veuillez noter les photos! Let op de fotos!

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift Heimkino, Ausgabe 4-5/2001: Bericht über Bryston SP1 Prozessor Vorverstärker und 9B ST Fünfkanal-Endstufe, Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 4 Format, size: 28 x 21 cm Gewicht, weight: 0,016 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi & Records, Ausgabe Juli 2002: Test-Bericht Verstärker-Kombi Bryston 25 BPS und 14B SST, Deutsche Ausgabe, German edition! Versand weltweit, perfekte Verpackung! Shipping worldwide, perfect packaging! Drucknummer, print number: ohne, without Sprache, language: Deutsch, German, D Zustand, condition: Hervorragend, excellent! Seitenanzahl, pages: 6 Format, size: 26 x 19,5 cm Gewicht, weight: 0,021 kg Bitte beachten Sie die Fotos! Note photos, please!Veuillez noter les photos!Let op de fotos!