Description
Bryston 9B SST Home Theater Amplifier - 140W x 5 Into 8 Ohms Bryston 9B SST Home Theater Amplifier - 140W x 5 Into 8 Ohms General:The 9B SST is a five-channel power amplifier that can produce 140 watts per channel into eight ohms, and 200 watts per channel into four-ohm speaker loads. If you look closely at the specs of most theater amps, many are incapable of producing the full rated output to all channels at the same time which is a huge compromise for a high-end theater setup.No compromises in design, quality, or total output here.Super nice condition with just a few scuffs or light dings.Fully tested here at SkyFi and working as it should on all 5 channels. One channel was just serviced by Bryston.Brand Background:Bryston Ltd. is a Canadian company which has been designing and manufacturing audio equipment for over 35 Years. While there are many companies competing in their market, Bryston’s gear is coveted by enthusiasts and professionals alike. They have earned the reputation of providing bullet-proof reliability, high performance and value. Ownership:Single OwnerConnections:RCA, XLR and 5 Way Binding PostsGeneral Sound:Neutral sound with little to no colorationCosmetic Condition:7/10 = Good. One or two minor scratches. Well Maintained.Working Condition:Working perfectly and tested in our lab and listening room.Included:Just the unit and power cord.Packing:Will be packed using our highly developed in-house process and custom packing materials. Specs: Solid State / Tubed Solid State Number of Channels 5 Power 120 Watts / Channel @ 8 Ω(1), 200 Watts / Channel @ 4 Ω(1) Power Bandwidth < 1 Hz to over 100 kHz(1) Slew Rate > 60 Volts per microsecond(1) Total Harmonic Distortion < 0.005 %, 20 Hz - 20 kHz @ 120 Watts into 8 Ω(1) < 0.007 %, 20 Hz - 20 kHz @ 200 Watts into 4 Ω(1) Intermodulation Distortion < 0.005 %, 20 Hz - 20 kHz @ 120 Watts into 8 Ω(1) < 0.007 %, 20 Hz - 20 kHz @ 200 Watts into 4 Ω(1) Noise > 110 dB below full output 29 dB gain(1) > 113 dB below full output 23 dB gain(1) > 116 dB below full output 17 dB gain(1) Sensitivity 1.1 Volts = 120 Watts @ 8 Ω (1 Volt position)(1) 2.2 Volts = 120 Watts @ 8 Ω (2 Volts position)(1) 4.4 Volts = 120 Watts @ 8 Ω (4 Volts position)(1) Input Impedance 50k Ω unbalanced(1) 20k Ω balanced(1) Damping Factor > 500 @ 20 Hz, ref. 8 Ω Power Consumption and Heat Load At idle: 192 Watts(1) Single channel: 120 Watts @ 8 Ω: 242 Watts(1) 5 channels: 120 Watts @ 8 Ω: 1397 Watts(1) Single channel: 200 Watts @ 4 Ω: 422 Watts(1) 5 channels: 200 Watts @ 4 Ω: 2295 Watts(1) Dimensions (W x D x H) 19 x 19 x 5.25(1) 48.3 x 48.3 x 13.3 cm(1) Weight 62 lbs.(1) 28 kg.(1) Weight: 69 lbs. Testing Process: We start with a visual inspection of all internal components to make sure that there are no signs of heat stress or damage. Capacitors are checked for telltale signs of predictive failure including bulging, shrunken wrappers, or physical leakage. We also inspect the PCBs for discoloration from resistors or transistors that may have been running hot. On vintage units we often spot check select capacitors for value and ESR. If the amplifier passes visual inspection, we move on to a controlled power on sequence using a Sencore safety analyzer to monitor current draw in real time. Once the amplifier is determined to be safe to operate, we connect it to full AC mains for function and power testing. We connect the speaker outputs of the amplifier to a Sencore PA81 Power Analyzer which acts as a dummy load, DC offset monitor, and oscilloscope interface. We start with a low level 1KHz test signal at the amplifier’s input and slowly increase its amplitude while monitoring the output on an oscilloscope for signs of noise, clipping, distortion, or improper channel balance. We continue increasing the signal level until the amplifier reaches clipping. At this point we take an output power measurement and compare it to the spec sheet of the amplifier to verify proper performance. If the device under test has both balanced and single ended inputs they are both tested at this time. We finish off the bench evaluation with a 1KHz square wave check and a 20Hz to 20KHz sine sweep to assess the amplifier’s frequency response characteristics. This battery of tests will usually reveal if the amplifier has any issues that need further attention. Before the device leaves the bench, we perform a listening test with actual music using a variety of preferred test tracks. Our benches are outfitted with familiar monitor speakers which help us identify inconsistencies that will not always show up on our test gear. The main things that we are listening for are hum or noise with no signal present, proper center image, clicks, pops, or any other obvious undesirable audio characteristics. If the unit passes all of these tests it is moved to our long term testing rig where we simulate real word operating conditions for 6-8 hours. This allows us to monitor the unit for signs of thermal runaway or intermittent issues that only crop up when the unit has fully come up to temperature. *Scroll down to view additional images for this listing and click to enlarge. **Please note we are not a repair shop and only restore what we own. ---------- SkyFi Audio - Curators of Vintage Audio Gear SkyFi Audio is a small startup business specializing in the purchase, reconditioning, and reselling of high end audio equipment. We only buy equipment that we admire and are passionate about. No mid-fi, no gimmicks, no junk. Each piece of equipment is cosmetically restored and fully tested in our well-equipped lab by an engineer with 30+ years of experience in the HiFi world. If it does not meet or exceed the original manufactures specifications, it will not be sold. We are very selective about the equipment we purchase, focusing on mostly analog, high-build quality, American, and European built units. Please note we are not a repair shop and only restore what we own. Through our sister company, which is an authorized dealer for McIntosh, Audio Research, Sonus Faber, ClearAudio, Project, and Sony ES, we have access to OEM parts, service, and support. ---------- PURCHASING GUIDELINES: 1) This item will be professionally packaged and insured for safe transit to your home unless you opt for local pickup from our shop. All local pickup items are only wrapped in industrial strength clear stretch wrap if the original manufacturer packaging is unavailable. Local pickup is available in Glen Rock, NJ, 07452, just a half hour drive from Midtown Manhattan, with convenient parking near our building. If we don’t have the original packaging, we use heavy-duty double-ply corrugated boxes with custom made to your item SealedAir Instapak expanding foam custom inserts. In many cases this has proven to be better than the original packaging! We also use high quality fiber reinforced tape to seal our packages. Lightweight items will be bubble wrapped and shipped in a high-quality box. 2) We will not review or accept any offers that do not go through the official eBay system. We have too many items for sale and it’s nearly impossible to keep track of offers outside of the official system. Please do not message, email, or text any offers. 3) All listings are eligible for the eBay Global Shipping Program unless the item exceeds the maximum weight/price requirements to your country. If this is the case simply message us via eBay. We only accept bank wire transfers for international payments and frequently ship worldwide via UPS. 4) Please ensure your shipping address is correct within eBay as we will ONLY ship to the eBay/PayPal Confirmed Shipping Address. No exceptions. 5) eBay may charge and collect sales tax to your state/jurisdiction which we have no control over. eBay v1.7 × × × × × × × × × × × × × Buy now and save! Tell a friend Visit store Watch now Postage info UPS Ground - $0.00 Local Pickup - $0.00 Click the Postage tab above the listing description for more info Additional delivery notes PICK UP OPTION Our items are available for pick-up. Pick up procedure is as follows: Purchase the item through eBay Email us to coordinate pickup PAYING VIA PAYPAL We accept PayPal on our all our items so you can shop with confidence. Simple choose the PayPal option when proceeding through the checkout. Additional Information No additional information at this time Ask seller a question You might also like Dynavector 10x3 High-Output MC Phono Cartridge Music Reference RM-5 MK II Tube Preamplifier with Phono Music Reference RM-9 Tube Amplifier With EL34s Marantz Model 150 Vintage AM/FM Tuner with Scope Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © SkyFi Audio Postage Click the Postage tab above the listing description for more info Payment Accepted Payment Methods PayPal Returns Returns are not accepted Seller will pay for return shipping. eBay integration by
| 
Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi Test TV-Video, Ausgabe 2/2003.Darin ein Testbericht der Verstärkerkombination Bryston 25 BPS + 4B SST. Drucknummer/print number: ohne, without Sprache/language: Deutsch, German Zustand/condition: hervorragend, excellent Seitenanzahl/pages: 6 Format/size: 29,7 x 21 cm
Live search