B&W BOWERS & WILKINS DM602 S3 Speakers Large Bookshelf Consecutive Serial Number. Working, some cosmetic issues on cabinets, drivers are ok. Look at pics

This listing is for a single tweeter, which is compatible with all B&W DM600, DM601, DM602.5, DM603, DM604, and S3 Series speakers. The tweeter functions perfectly and produces exceptional quality. Though there is a few tiny marks on the dome, it is barely visible. Please examine the photos for further inspection. If you require other used authentic parts from B&W, kindly let us know, as we may be able to acquire them for you.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

B&W Bowers & Wilkins DM602 S3 7 Woven Driver Speaker Woofer ZZ12882 PAIR. Came out of speakers with damaged cabinets tested matched pair

Up for sale is this pair of Bowers and wilkins DM602 S3 Speaker grill/covers. The grills are in excellent cosmetic condition. All items are sold as is and may have stains, scratches, creases, holes, scuffs, tears, rips, and wear consistent with age. Please view all images carefully and feel free to message me with any questions regarding the item. Thanks for looking!

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.

B&W Bowers & Wilkins DM601, DM602, DM603 & DM604 S3 Generic Tweeter Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins DM601, DM602, DM603 & DM604 S3 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

The listing is for one single tweeter. This unit is used in all B&W DM600 DM601 DM602.5 DM603 DM604 S3 Series speakers. The tweeter is fully working and sounds great. The dome is slightly dented. Please inspect the photos. Please ask if you need any other used B&W genuine parts. We might get them for you.

The listing is for a genuine B&W Crossover which is used in all B&W DM602.5 S3 speakers. It’s in a perfect cosmetic condition and fully working. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. It comes from pets/smoke free home. Please let me know if you need any other B&W genuine part. I might be able to get them for you.

Bowers and Wilkins DM602.5 S3 floor standing speakers. In good condition with no damage to tweeters or cones Collection only from MK18

B&W DM602.5 S3 Speaker Crossover Bowers Wilkins Genuine ZZ13188 G.

A set of B&W Bowers & Wilkins DM602 S3 DM604 S3 Upper/Lower baffle.

This listing is for a single tweeter, which is compatible with all B&W DM600, DM601, DM602.5, DM603, DM604, and S3 Series speakers. The tweeter is in excellent condition, functions perfectly, and produces exceptional sound quality. Though there is a tiny mark on the dome, it is barely visible and difficult for the camera to capture. Please examine the photos for further inspection. If you require other used authentic parts from B&W, kindly let us know, as we may be able to acquire them for you.

Part number is ZZ13137 or ZC13137. This is brand new unused part supplied from B&W. I must have bought it and never used it. Discovered during a clear out of old parts.This part is used in all Series 3 B&W DM600 DM601 DM602 DM602.5 DM603 DM604 speakers.Please ask if you want to see anything in detail.Will be posted with an express tracked service.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Pristine. No creases or tears. Please inspect the photos.

The listing is for one single tweeter. This unit is used in all B&W DM600 S3, DM601 S3, DM602 S3, DM602.5 S3, DM603 S3, DM604 S3 speakers. The tweeter is fully working. Minor crease to the foil, but no holes or tears so still sounds as it should. Please inspect the photos. This is a black tweeter, this tweeter also come in grey but has a different part number. Please make sure it is the black tweeter that is required for your speaker.

Bower & Wilkins DM602.5 S3 Speakers Ive thoroughly tested these with no issues, and they sound lovely. Great pair of floor standing speakers.Cosmetically these speakers are in good condition. However one of the speakers pointed dust covers (on the bass speaker) has been squashed a bit, but works okay still. There are a few small knocks at the rear, Ive shown these in separate pictures.These can easily be fitted with metal spike feet if required, but have nothing at the present.They can be Bi Wired, but at the moment have the links in, so you can connect them as normal.I am selling two sets of these speakers, so please ensure you select the pair you want when buying. All my items are thoroughly cleaned. Please also view my other items. COLLECTION ONLYTo be collected from – Portsmouth. Any questions feel free to ask, Rob

The listing is for one single tweeter. This unit is used in all B&W DM600 DM601 DM602.5 DM603 DM604 S3 Series speakers. The tweeter is fully working and sounds great. The dome is slightly dented. Please inspect the photos. Please ask if you need any other used B&W genuine parts. We might get them for you.

B&W DM602 S3 Bowers & Wilkins Audiophile Hifi Speakers - See Pictures + Listing. Working perfectly Come with original covers Unfortunately there is some damage The vinyl is peeling on the tops as shown and both tweeters (top ones) have a dent (been pushed in) They sound great Please see pictures for condition and measurements as they form part of the description Thanks for looking and please dont hesitate to get in touch with any questions Please check out my other items

B&W Bowers Wilkins DM60X series Gold Flat Biwire Links X2 Quantity: 2EA (Left & Right for A speaker) ConditionUsed But Great shape.Working and Cosmetic Condition. Will fit Bowers Wilkins DM600 series DM550 seriesDM500 series Also fit in DM601 DM602 DM603 D604 CDM*/ CDM*SECDM* NT CM2 /4DM60X S2P * series speakers and others If you have any further questions, please dont hesitate to contact me. Shipping: We do customized packaging. Whatever the shape or size of the items. It is heavy-duty packaging with three layers cardboard. So, The package will deliver safe and secure in your place. prefer fast shipping, You wont have to wait too long. Contact: We all make mistakes dont we?. Because we do not know what will happen, So, if youre not happy with items, Please, feel free contact to me. we will provide you with best solutions and Please give us a second chance to be happy again. Thank you, Seller Note : Please double check your shipping address & contact number before your purchase from our store. We will contact you shortly after your purchased and we will keep you updated. Please keep in touch with our store after purchased. Just in case, we have to contact you by ebay message or by phone.

Bowers and Wilkins DM602.5 S3 floor standing speakers. In good condition with no damage to tweeters or cones Slight mark of super glue on top of one of the cabinets but should cone off with a sharp knife Collection only from MK18

B&W DM602 S3 Bowers & Wilkins Audiophile Hifi Speakers. Good condition. Very tiny cosmetic mark on each of the top 4 corners of the 2 speakers. Never noticed them before but speakers have been closely inspected for this listing. If you look at all the photos listed you probably can not see any of these very tiny marks. No damage to the speakers otherwise. Speakers can be listened to at the time of collection to ensure they are in very good working order: Collection to be by the end of the following weekend (Sunday 4th June). I do not have the packaging for the speakers. UK sale only and the item is only available for collection. The listing is only for the 2 speakers and not other items seen in the photos eg the cables etc. Please see my other listing for the speaker stands I used to support the speakers. Thanks.