The listing is for one single woofer which is used in all B&W CWM 650 speakers. The woofer is in perfect cosmetic and working condition. It will be packed carefully for safe travel to anywhere in the world. Please ask if you need any other used B&W genuine parts. I might get them for you.

The listing is for one single tweeter. Part number is ZZ11916. This unit is used in CWM650 speakers. The tweeter is slightly dented but it’s fully working and sounds brilliant. Please ask if you want to see anything in details. I will try to make more close-up photos upon request. It will be packed very carefully for safe travel to anywhere in the world.

Brand:Bowers & WilkinsModel:CWM652Single or Pair:SingleConnectivity:WiredType:In-Wall SpeakerIncludes:Cast Bracket, Speaker Grille, Speaker, Cut-Out Template ANY ITEMS OR ACCESSORIES NOT LISTED ABOVE OR ANYTHING NOT SHOWN IN PHOTOS PROVIDED ARE NOT INCLUDED WITH THIS ITEM. Please note: Ebay has now started collecting sales tax automatically. If you are being charged sales tax and you are exempt from paying sales tax, please contact Ebay directly about having the sales tax removed from your invoice before making payment. We are not able to issue any refunds for tax exempt reasons after the item has been paid for. Shipping Services: We only ship using UPS Ground. We cannot ship using any other carriers. We are not able to offer Local Pick Up. All items will have to be shipped unless otherwise detailed in the listing. Shipping Locations: United States only. We do not sell or ship Internationally. Any buyers found using a freight forwarding service to forward items out of the US will be blocked from making future purchases. Excludes: Alaska/Hawaii, US Protectorates, APO/FPO, Africa, Asia, Mexico, Central America and Caribbean, Canada, Europe, Middle East, Oceania, Southeast Asia, South America, PO Box Warranty: 30 - day DOA Warranty unless otherwise noted. Returns: Require an RMA Number. Refunds: No refunds after 30 days from time of purchase. Return Shipping: Paid for by Regency Technologies for defective items ONLY. Immediate payment is required within 4 days of auction close. If we do not receive payment your items will be relisted and sold. Your bid is a binding contract between you and Regency Technologies. We are not responsible for electronic incompatibilities. We reserve the right to cancel bids from any bidder with negative feedback ratings or who are acting suspiciously. You have 4 days from the close of the auction to make payment. On the 5th day an Unpaid Item Case will automatically be opened.

This is for a pair of brand new in box Bowers & Wilkins CWM7.4 S2 In Wall LCR Speaker. Great for theatre rooms or around TVs for a clean look.

Bowers & Wilkins CWM 650 In Wall Speakers (pair). Excellent condition with box and manual. Frequency response - 50 Hz to 30kHz @ 3dB. Treble contour switch to cut or boost high frequency. Sensitivity 89 dB. 11.1 x 7.3. Nominal impedance 8 ohms.

Used B&W Bowers & Wilkins CWM800 in-wall speaker. Speaker only; no mounting kit included. This unit has been tested and works perfectly. Please look at the photos carefully. Im happy to answer questions. I ship on Friday, Saturday, and Monday. Good Luck.

This is for a pair of brand new in box Bowers & Wilkins CWM7.4 S2 In Wall LCR Speaker. Great for theatre rooms or around TVs for a clean look.

2 x Bowers & Wilkins CWM 650 Generic Replacement Tweeter Diaphragm Voice Coils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit many of the the bowers & CWM 500, CWM 650, CWM 800, CCM 65, CWM LCR7 + others. They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

2 x Bowers & Wilkins CWM 800 Generic Replacement Tweeter Diaphragm Voice Coils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit many of the the bowers & CWM 500, CWM 650, CWM 800, CCM 65, CWM LCR7 + others. They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot stright into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

Brand:Bowers & WilkinsModel:CWM663Type:In-Wall SpeakerConnectivity:WiredColor:Black with Paintable white GrilleDimensions:8-3/4W x 12-7/16HFeatures:1 Nautilus tube-loaded aluminum dome tweeter, 6 aramid fiber woofer, frequency response: 45-50,000 Hz (-6 dB), recommended amp power: 25 to 150w, sensitivity: 88 dBIncludes:1 In-wall loudspeaker, Mounting frame, Grille, Paint mask, Cut-out template, DocumentsPlease Note:Item is New in Open Box, Box Shows Some Wear, Single Speaker ANY ITEMS OR ACCESSORIES NOT LISTED ABOVE OR ANYTHING NOT SHOWN IN PHOTOS PROVIDED ARE NOT INCLUDED WITH THIS ITEM. Please note: Ebay has now started collecting sales tax automatically. If you are being charged sales tax and you are exempt from paying sales tax, please contact Ebay directly about having the sales tax removed from your invoice before making payment. We are not able to issue any refunds for tax exempt reasons after the item has been paid for. Shipping Services: We only ship using UPS Ground. We cannot ship using any other carriers. We are not able to offer Local Pick Up. All items will have to be shipped unless otherwise detailed in the listing. Shipping Locations: United States only. We do not sell or ship Internationally. Any buyers found using a freight forwarding service to forward items out of the US will be blocked from making future purchases. Excludes: Alaska/Hawaii, US Protectorates, APO/FPO, Africa, Asia, Mexico, Central America and Caribbean, Canada, Europe, Middle East, Oceania, Southeast Asia, South America, PO Box Warranty: 30 - day DOA Warranty unless otherwise noted. Returns: Require an RMA Number. Refunds: No refunds after 30 days from time of purchase. Return Shipping: Paid for by Regency Technologies for defective items ONLY. Immediate payment is required within 4 days of auction close. If we do not receive payment your items will be relisted and sold. Your bid is a binding contract between you and Regency Technologies. We are not responsible for electronic incompatibilities. We reserve the right to cancel bids from any bidder with negative feedback ratings or who are acting suspiciously. You have 4 days from the close of the auction to make payment. On the 5th day an Unpaid Item Case will automatically be opened.

This is for a pair of brand new in box Bowers & Wilkins CWM7.4 S2 In Wall LCR Speaker. Great for theatre rooms or around TVs for a clean look.

Hi, I bought these from new and they have served me very well as a home-cinema centre, left/right set-up. The speakers deliver audiophile sound quality and the in-wall fit makes them blend into any interior. These are the specs I found online: Tilt axis switch ±10°3-position treble contour switchSwing-out dog fixings2-way in-wall speaker system1x ø25mm (1 in) aluminium dome tweeter2x ø130mm (5 in) woven Kevlar® cone mid/bass-6dB at 50Hz and 30kHz55Hz-20kHz ±3dB on reference axis91dB spl (2.83V, 1m)8? (minimum 3.6?)3.5kHz150W continuous into 8? on unclipped programme255mm (10 in) x 371mm (14.6 in) external dimensions220mm (8.7 in) x 337 (13.3 in) cut-out dimensions85mm (3.4 in) from wall surface3.7kg (8.2lb)On 02-May-23 at 16:00:47 BST, seller added the following information: B&W speakers