First the good things: Tested the MMC 20EN cartridge and it tracks nicely and sounds good. Returns at the end of the record properly. Some paperwork included. Plinth and belt are all good and the dust cover as well but its not attached. Second, the bad things: Dust cover is not attached. There is a small bag of pieces that I think go with the dust cover attachment. Not sure but I think they are. And last but not least, the table will only turn if you press the turn and stop button at the same time. If you do that its fine and works properly. Be advised. Will be packed properly with transit screws tightened. Sold as-is. No returns. Almost forgot... the Rolling Stones Sticky Fingers 33 LP is included. Thanks for bidding!

I do not know much about this unit, so selling as is for parts or repair only. Comes with everything seen

First the good things: Tested the MMC 20EN cartridge and it tracks nicely and sounds good. Returns at the end of the record properly. Some paperwork included. Plinth and belt are all good and the dust cover as well but its not attached. Second, the bad things: Dust cover is not attached. There is a small bag of pieces that I think go with the dust cover attachment. Not sure but I think they are. And last but not least, the table will only turn if you press the turn and stop button at the same time. If you do that its fine and works properly. Be advised. Will be packed properly with transit screws tightened. Sold as-is. No returns. Almost forgot... the Rolling Stones Sticky Fingers 33 LP is included. Thanks for bidding!

First the good things: Tested the MMC 20EN cartridge and it tracks nicely and sounds good. Returns at the end of the record properly. Some paperwork included. Plinth and belt are all good and the dust cover as well but its not attached. Second, the bad things: Dust cover is not attached. There is a small bag of pieces that I think go with the dust cover attachment. Not sure but I think they are. And last but not least, the table will only turn if you press the turn and stop button at the same time. If you do that its fine and works properly. Be advised. Will be packed properly with transit screws tightened. Sold as-is. No returns. Almost forgot... the Rolling Stones Sticky Fingers 33 LP is included. Thanks for bidding!

Original Bang & Olufsen tonearm part# 2850068 forBeogram 1100Beogram 1900 (5701)Beogram 3400 (5703, 5726)Beocenter 1800 Complete with counterweight, adjustment slider and cartridge socket.Tested fine.Leads were desoldered (not cut) so are still original lengths. This is a used part in excellent condition.All photos are of the actual part. 1403

Complete motor forBeogram 1100Beogram 1900Beogram 3400 (type 5703) Original part# 8400085For use with 220-240V 50Hz. This motor was rebuilt with new bearings and oil reservoirs from Beoparts-shop.It was aligned and tested and runs absolutely fine and quiet. Everything in the photo included (mounting hardware etc.)The idler wheel is not new but in great condition.All photos are of the actual part. 1404

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working order Uk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

Original Bang & Olufsen MMC20E Cartridge/StylusUk stock ready for dispatch Checked on a spectrum analyser, delicate, accurate and precise.Tracking perfectly.Sounds great.Stock images appearance will vary slightly.BANG & OLUFSEN MMC20E CART & STYLUS BEOGRAM 6000 4000 8000 BEOCENTER 7000 7002 3600 4600Inspected, tested - see images MMC means Moving Micro-Cross Titanium-bonded naked elliptical diamond, to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl! MMC20EManufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC cartridges were available with standard ½ mounting brackets, or with easy plug-in, lightweight connectors. These enabled you to mount MMC cartridges onto non-Bang & Olufsen arms. The cartridges plugged directly into Beogram pickup arms without additional mounting gearMMC 20 S was a stereo cartridge with a spherical framed diamondMMC 20 E was fitted with a framed elliptical diamond which has a high polishMMC 20EN had a naked elliptical diamond, mounted on a tiny tapered cantileverMMC 20 CL utilised a Contact Line naked diamond mounted on a single crystal sapphire cantilever. This shape ensures maximum groove contact. This was the most highly-specified cartridge in the MMC 20 rangeIn 1958, Bang & Olufsen introduced the first stereo pickup cartridge ever made in Europe. This was called the SP1. Since then, many design innovations and the creative use of new materials have kept B&Os cartridges at the forefront of audio technology. By 1979 - 80, Bang & Olufsens cartridges were represented by the MMC 20 series. MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. The MMC20 series therefore represented the closest that modern technology at that time, could possibly afford.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.Bang & Olufsen cartridges have always been highly acclaimed for their low ETM values. The ETM of the MMC 20CL is a mere 0,3mg and in the standard MMC 20 range,, only 0,5mg.MMC cartridges were manufactured by Bang & Olufsen as totally integrated units. This means that the elements were matched, balanced and sealed at the factory. Using a computer-supported testing programme,, each sealed unit was meticulously tested and its performance information automatically registered and packed with each cartridge. The information given included output voltage, relative voltage output (channel balance), channel separation and frequency response. Individually-calibrated frequency response curves were also supplied with the higher-specified MMC 20CL cartridges.

ITEM: Bang & Olufsen | B&O | Beogram 3400 | Turntable For details please see provided photos. It plays, sensor buttons seems to work, not sure if it plays at the right speed. You will receive the item as pictured, including accessories visible on the photos. If you have any questions don't hesitate to ask.Colors may be slightly altered due to camera lighting. All items are tested and cleaned. Condition of item will be as pictured. NOTE:  Item is used, this means that the item may have usage marks. Please see provided photos for the condition of the item. Alternative photos can be requested. Please do not leave negative feedback or open a case before contacting first. If you are not satisfied 100% for any reason, please contact me , as I am HAPPY to help you. As FEEDBACK is important to me.          NO RETURNS OR WARRANTY - SOLD FOR PARTS OR REPAIR PAYMENT: Accepted forms of payment: - Ebay Payments (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) SHIPPING: - All items will be dispatched using registered and insured shipping (Post NL, DPD or DHL depending on country).- When purchasing multiple items, they always will be combined. Some items may be shipped in two sparate packages.- Shipping to UK and any other non EU country ONLY by request ! Please send me a message first.  REFUND POLICY:(If applicable)  Any postage costs which incurred from the refund (including items that are free postage) will be deducted.          Unfortunately, I can’t grant a refund if the returned item is not in resaleable condition. Please note that the customer will bear the incurred delivery cost for returning the item.       PLEASE NOTE: I will not accept any bids, offers or buy it now from anyone with bad feedback or 5 stars or less and I reserve the right to cancel your bid. Please contact me prior to you bidding and I will be happy to accommodate your bids.  If you have any questions or requests please feel free to ask. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ARTIKEL: Bang & Olufsen | B&O | Beogram 3400 | Turntable Sie erhalten den abgebildeten Artikel einschließlich des auf den Fotos sichtbaren Zubehörs. Wenn Sie Fragen haben, zögern Sie nicht zu fragen.Die Farben können aufgrund der Kamerabeleuchtung leicht verändert sein. Alle Artikel werden getestet und gereinigt. Der Zustand des Artikels ist wie abgebildet. HINWEIS: Artikel verwendet wird, bedeutet dies, dass der Artikel möglicherweise Gebrauchsspuren aufweist. Den Zustand des Artikels entnehmen Sie bitte den bereitgestellten Fotos. Alternative Fotos können angefordert werden. Bitte hinterlassen Sie kein negatives Feedback und öffnen Sie keinen Fall, bevor Sie sich zuerst an uns wenden. Wenn Sie aus irgendeinem Grund nicht 100% zufrieden sind, kontaktieren Sie mich bitte, da ich GLÜCKLICH bin, Ihnen zu helfen. Da ist mir FEEDBACK wichtig. VORSICHT: KEINE RÜCKGABE ODER GARANTIE ZAHLUNG: Akzeptierte Zahlungsarten: - Ebay (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) VERSAND: - Alle Artikel werden per Einschreiben und versichert versandt (Post NL, DPD oder DHL je nach Land).- Beim Kauf mehrerer Artikel werden diese immer kombiniert. Einige Artikel werden möglicherweise in zwei Teilen geliefert RÜCKGABERECHT: Alle Portokosten, die aus der Rückerstattung entstehen (einschließlich Artikel, die kostenlos sind), werden abgezogen. Leider kann ich keine Rückerstattung gewähren, wenn sich der zurückgegebene Artikel nicht in einem wiederverkaufbaren Zustand befindet. Bitte beachten Sie, dass der Kunde die anfallenden Versandkosten für die Rücksendung des Artikels trägt.  BITTE BEACHTEN SIE: Ich akzeptiere keine Gebote, Angebote oder kaufe sie jetzt von Personen mit schlechtem Feedback oder 5 Sternen oder weniger und behalte mir das Recht vor, Ihr Gebot zu stornieren. Bitte kontaktieren Sie mich, bevor Sie bieten, und ich werde gerne Ihre Gebote annehmen. Wenn Sie Fragen oder Wünsche haben, können Sie diese gerne stellen.

ITEM: Bang & Olufsen | B&O | Beogram 3400 | Turntable For details please see provided photos. It plays, sensor buttons seems to work, not sure if it plays at the right speed. You will receive the item as pictured, including accessories visible on the photos. If you have any questions don't hesitate to ask.Colors may be slightly altered due to camera lighting. All items are tested and cleaned. Condition of item will be as pictured. NOTE:  Item is used, this means that the item may have usage marks. Please see provided photos for the condition of the item. Alternative photos can be requested. Please do not leave negative feedback or open a case before contacting first. If you are not satisfied 100% for any reason, please contact me , as I am HAPPY to help you. As FEEDBACK is important to me.          NO RETURNS OR WARRANTY - SOLD FOR PARTS OR REPAIR PAYMENT: Accepted forms of payment: - Ebay Payments (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) SHIPPING: - All items will be dispatched using registered and insured shipping (Post NL, DPD or DHL depending on country).- When purchasing multiple items, they always will be combined. Some items may be shipped in two sparate packages.- Shipping to UK and any other non EU country ONLY by request ! Please send me a message first.  REFUND POLICY:(If applicable)  Any postage costs which incurred from the refund (including items that are free postage) will be deducted.          Unfortunately, I can’t grant a refund if the returned item is not in resaleable condition. Please note that the customer will bear the incurred delivery cost for returning the item.       PLEASE NOTE: I will not accept any bids, offers or buy it now from anyone with bad feedback or 5 stars or less and I reserve the right to cancel your bid. Please contact me prior to you bidding and I will be happy to accommodate your bids.  If you have any questions or requests please feel free to ask. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ARTIKEL: Bang & Olufsen | B&O | Beogram 3400 | Turntable Sie erhalten den abgebildeten Artikel einschließlich des auf den Fotos sichtbaren Zubehörs. Wenn Sie Fragen haben, zögern Sie nicht zu fragen.Die Farben können aufgrund der Kamerabeleuchtung leicht verändert sein. Alle Artikel werden getestet und gereinigt. Der Zustand des Artikels ist wie abgebildet. HINWEIS: Artikel verwendet wird, bedeutet dies, dass der Artikel möglicherweise Gebrauchsspuren aufweist. Den Zustand des Artikels entnehmen Sie bitte den bereitgestellten Fotos. Alternative Fotos können angefordert werden. Bitte hinterlassen Sie kein negatives Feedback und öffnen Sie keinen Fall, bevor Sie sich zuerst an uns wenden. Wenn Sie aus irgendeinem Grund nicht 100% zufrieden sind, kontaktieren Sie mich bitte, da ich GLÜCKLICH bin, Ihnen zu helfen. Da ist mir FEEDBACK wichtig. VORSICHT: KEINE RÜCKGABE ODER GARANTIE ZAHLUNG: Akzeptierte Zahlungsarten: - Ebay (PayPal, Google Pay, Visa, Mastercard, Amex, SEPA) VERSAND: - Alle Artikel werden per Einschreiben und versichert versandt (Post NL, DPD oder DHL je nach Land).- Beim Kauf mehrerer Artikel werden diese immer kombiniert. Einige Artikel werden möglicherweise in zwei Teilen geliefert RÜCKGABERECHT: Alle Portokosten, die aus der Rückerstattung entstehen (einschließlich Artikel, die kostenlos sind), werden abgezogen. Leider kann ich keine Rückerstattung gewähren, wenn sich der zurückgegebene Artikel nicht in einem wiederverkaufbaren Zustand befindet. Bitte beachten Sie, dass der Kunde die anfallenden Versandkosten für die Rücksendung des Artikels trägt.  BITTE BEACHTEN SIE: Ich akzeptiere keine Gebote, Angebote oder kaufe sie jetzt von Personen mit schlechtem Feedback oder 5 Sternen oder weniger und behalte mir das Recht vor, Ihr Gebot zu stornieren. Bitte kontaktieren Sie mich, bevor Sie bieten, und ich werde gerne Ihre Gebote annehmen. Wenn Sie Fragen oder Wünsche haben, können Sie diese gerne stellen.

Original Bang & Olufsen MMC20E Cartridge/StylusUk stock ready for dispatch Checked on a spectrum analyser, delicate, accurate and precise.Tracking perfectly.Sounds great.Stock images appearance will vary slightly.BANG & OLUFSEN MMC20E CART & STYLUS BEOGRAM 6000 4000 8000 BEOCENTER 7000 7002 3600 4600Inspected, tested - see images MMC means Moving Micro-Cross Titanium-bonded naked elliptical diamond, to reduce record wear and maintain optimum surface contact Effective Tip Mass of mg 0,4 this is what preserves your vinyl! MMC20EManufactured: 1979 - 1985 Designer: Jacob Jensen Colours: BlackPrior to the release of MMC1 - 5 cartridges, Bang & Olufsen had the following MMC range of combined styli and cartridges:MMC cartridges were available with standard ½ mounting brackets, or with easy plug-in, lightweight connectors. These enabled you to mount MMC cartridges onto non-Bang & Olufsen arms. The cartridges plugged directly into Beogram pickup arms without additional mounting gearMMC 20 S was a stereo cartridge with a spherical framed diamondMMC 20 E was fitted with a framed elliptical diamond which has a high polishMMC 20EN had a naked elliptical diamond, mounted on a tiny tapered cantileverMMC 20 CL utilised a Contact Line naked diamond mounted on a single crystal sapphire cantilever. This shape ensures maximum groove contact. This was the most highly-specified cartridge in the MMC 20 rangeIn 1958, Bang & Olufsen introduced the first stereo pickup cartridge ever made in Europe. This was called the SP1. Since then, many design innovations and the creative use of new materials have kept B&Os cartridges at the forefront of audio technology. By 1979 - 80, Bang & Olufsens cartridges were represented by the MMC 20 series. MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. The MMC20 series therefore represented the closest that modern technology at that time, could possibly afford.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.Bang & Olufsen cartridges have always been highly acclaimed for their low ETM values. The ETM of the MMC 20CL is a mere 0,3mg and in the standard MMC 20 range,, only 0,5mg.MMC cartridges were manufactured by Bang & Olufsen as totally integrated units. This means that the elements were matched, balanced and sealed at the factory. Using a computer-supported testing programme,, each sealed unit was meticulously tested and its performance information automatically registered and packed with each cartridge. The information given included output voltage, relative voltage output (channel balance), channel separation and frequency response. Individually-calibrated frequency response curves were also supplied with the higher-specified MMC 20CL cartridges.

Original Bang & Olufsen MMC20CL Cartridge/Stylus perfect working order Uk stock ready for dispatch NOW Checked on a spectrum analyser, delicate, accurate and precise matching perfectly to its published specificationTracking perfectly with 1gram vertical tracking force The first B&O cartridge to use a single crystal sapphire cantilever. Get yourself the originalSingle crystal sapphire cantilever offers a very rigid but light structure five times stiffer than aluminium and 21% stiffer than beryllium transferring more of the signal from your vinylEffective tip mass is a very low 0.3mg which ensures low record wear and a high stylus resonance well beyond the audible rangeThe body itself forms an effective Mu-Metal screen against stray hum fields practically eliminating magnetic interference Courtesy of Beoworld.orgMMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal. Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies. Any questions just get in touch, Id be glad to help.

GS Audio Inc. is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. GS Audio Inc. has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. GS Audio Inc. makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. GS Audio Inc. reserves the right to cancel bids on any item due to feedback. This Listing Powered By